The InterLab study is organized by a measurement committee of iGEM to establish better measurement techniques in the synthetic biology field.We submit our measurement results that cope with the absorbance and fluorescence related withE. coli transformed with a variety oftest devices. We checked 8 plasmids, containing 2 controls and 6 test devices, and measurements were made in a plate reader with a 96 well microplate. We measured the absorbance and fluorescence of our samples using a Perkin Elmer 1420 multilabel counter.

Calibration 1: OD ₆₀₀ Reference point - LUDOX Protocol

We used LUDOX CL-X as a single point reference to obtain a conversion factor to transform absorbance (Abs ₆₀₀) data fromplate reader into acomparable OD ₆₀₀ measurement as would be obtained in a spectrophotometer.

Fig 1. Measurement of Abs ₆₀₀ and OD ₆₀₀ for LUDOX CL-Xand water

Calibration 2: Particle Standard Curve - Microsphere Protocol

We prepared a dilution series of silica microspheres and measure the Abs ₆₀₀ in a plate reader. These microspheres are similar to cells in physical size and optical characteristics. This measurement was used to obtain a standardcurve of particle concentration, enabling to convert Abs ₆₀₀ measurements to an estimatednumber of cells.

Fig2. Calculated particle counts from measured Abs₆₀₀and generation of a particle standard curve

Calibration 3: Fluorescence standard curve - Fluorescein Protocol

We prepared a dilution series of fluorescein in four replicates and measure the fluorescence in a96 well plate in aplate reader. Measuring these in the plate readerenabled us togenerate astandard curve of fluorescence for fluorescein concentration.

Fig 3.Correspondence between fluorescence and fluorescein concentration

Cell measurement

We had two plates to read at the end of procedure and one plate for each time point: 0 and 6 hours. On each plate,we readboth fluorescence and absorbance.We used the generated particle standard and fluorescent curves to determine fluorescence per OD and fluorescence per particle values.

Fig 4. Measurement of raw Abs600 and OD₆₀₀

Fig 5. Measurement of fluorescence per OD

Fig 6. Measurement of fluorescence per particle

Fig 7. The number of colonies and CFU/mL value in a starting sample of OD₆₀₀ = 0.1

Colony Forming Units per 0.1 OD₆₀₀E. coli cultures

For the CFU protocol, wecalculated colonies for our two Positive Control (BBa_I20270) cultures and our twoNegative Control (BBa_R0040) cultures.Our overnight cultureswere diluted to yield a 0.1 OD₆₀₀ using calculations described in iGEM 2018 InterLab Study Protocol.After a serial dilution for each overnight culture, we platedthe 8*10^-3, 8*10^-4, and 8*10^-5 dilutions on LB agar with triplication.With the assumption that one bacterial cell leads to one colony, we enumerated the number of colonies on each plate and multiplied the colony count by the final dilution factor to assess a CFU/mL value for a starting sample of OD₆₀₀.