Difference between revisions of "Team:US AFRL CarrollHS/Experiments"

Line 341: Line 341:
 
</ol>
 
</ol>
  
 +
 +
<div class="row"><h2>Chitinase Testing Against Yarrowia</h2></div>
 +
<ol>
 +
<div class="row"><li>Dilute Yarrowia culture 1:000</li></div>
 +
  <ul>
 +
  <div class="row"><li>Use 1.5 mL microcentrifuge tube</li></div>
 +
    <ul>
 +
    <div class="row"><li>Pipette .999 mL of TSB into tube</li></div>
 +
    <div class="row"><li>Pipette .001 mL of grown Yarrowia culture into tube</li></div>
 +
    <div class="row"><li>Inoculate tube by flicking 4-6 times</li></div>
 +
    </ul>
 +
  </ul>
 +
<div class="row"><li>Pipette .300 mL of diluted Yarrowia culture on TSA plate</li></div>
 +
  <ul>
 +
  <div class="row"><li>Use L-spreader to spread diluted Yarrowia culture</li></div>
 +
  <div class="row"><li>Let plates dry in fume hood for 30 minutes</li></div>
 +
  </ul>
 +
<div class="row"><li>Perform steps 4-6 a total of 3 times on 3 separate TSA plates</li></div>
 +
 +
<div class="row"><li>Using a pipette, spot 4 0.005 mL spots of chitinase enzyme on plate</li></div>
 +
  <ul>
 +
  <div class="row"><li>2 spots diluted to 10 mg/mL</li></div>
 +
  <div class="row"><li>2 spots diluted 5 mg/mL</li></div>
 +
  </ul>
 +
 +
<div class="row"><li>Using a pipette, spot 6 0.005 mL spots of chitinase enzyme on plate</li></div>
 +
  <ul>
 +
  <div class="row"><li>2 spots diluted to 10 mg/mL</li></div>
 +
  <div class="row"><li>2 spots diluted 1 mg/mL</li></div>
 +
  <div class="row"><li>2 spots diluted 0.1 mg/mL</li></div>
 +
  </ul>
 +
<div class="row"><li>Using a pipette, spot 4 0.005 mL spots of chitinase enzyme on plate</li></div>
 +
  <ul>
 +
  <div class="row"><li>2 spots diluted to 0.1 mg/mL</li></div>
 +
  <div class="row"><li>2 spots diluted 0.01 mg/mL</li></div>
 +
  </ul>
 +
 +
<div class="row"><li>Use one plate without Yarrowia as a negative control</li></div>
 +
 +
<div class="row"><li>Take one plate with Yarrowia spread and pipette 4 0.005 mL spots of PBS</li></div>
 +
  <ul>
 +
  <div class="row"><li>Use plate as positive control</li></div>
 +
  </ul>
 +
 +
<div class="row"><li>Cover plates with a plastic bag and place all plates into an incubator</li></div>
 +
  <ul>
 +
  <div class="row"><li>Incubate overnight at 27°Ce</li></div>
 +
  </ul>
 +
 +
</ol>
 +
 +
 +
 +
<div class="row"><h2>Chitinase And Cinnamaldehyde Spotting Testing Against Yarrowia</h2></div>
 +
<ol>
 +
<div class="row"><li>Pipette 0.300 mL of diluted Yarrowia culture on TSA plate</li></div>
 +
  <ul>
 +
  <div class="row"><li>Use L-spreader to spread diluted Yarrowia culture</li></div>
 +
  <div class="row"><li>Let plates dry in fume hood for 30 minutes</li></div>
 +
  </ul>
 +
<div class="row"><li>Make discs</li></div>
 +
  <ul>
 +
  <div class="row"><li>Using a holepunch, create 100 discs</li></div>
 +
  <div class="row"><li>Wrap discs in aluminum foil</li></div>
 +
  <div class="row"><li>Autoclave discs</li></div>
 +
  </ul>
 +
<div class="row"><li>Soak 25 discs in each of the following</li></div>
 +
  <ul>
 +
  <div class="row"><li>Chitinase enzyme from Streptomyces Griseus diluted to 10 mg/mL in 1/32 diluted cinnamaldehyde</li></div>
 +
  <div class="row"><li>Chitinase enzyme from Streptomyces Griseus diluted to 5 mg/mL with 1/32 diluted cinnamaldehyde</li></div>
 +
  <div class="row"><li>Chitinase enzyme from Streptomyces Griseus diluted to 10 mg/mL with 1/32 diluted cinnamaldehyde</li></div>
 +
  <div class="row"><li>Chitinase enzyme from Streptomyces Griseus diluted to 5 mg/mL with 1/64 diluted cinnamaldehyde</li></div>
 +
  </ul>
 +
<div class="row"><li>Place 4 of each of the previous discs on Yarrowia covered TSA plates</li></div>
 +
 +
 +
<div class="row"><li>Cover plates with a plastic bag and place plates in incubator</li></div>
 +
  <ul>
 +
  <div class="row"><li>Incubate overnight at 27°C</li></div>
 +
  </ul>
 +
 +
</ol>
  
  

Revision as of 21:56, 15 October 2018

Experiments

Transformations

BI21 Cells:

  1. Thaw 50 µL vial of BL21 cells on ice
  2. Inoculate 2µL DNA into 50µL BL21 cells
    • incubate on ice for 30 minutes
    • heat shock at 42℃ for 10 seconds
    • incubate on ice for 5m
  3. Inoculate 250µL LB into vial
    • incubate at 37℃ with shaking for 1.5 hours
  4. Plate 1x/9x

JM109 Cells:

  1. Thaw vial of JM109 cells on ice
  2. Label 14 mL Falcon tube & plane on ice
  3. Inoculate 50 µL JM109 cells into Falcon tube
  4. Inoculate 2µL DNA into 50µL JM109 cells
    • incubate on ice for 20m
    • heat shock at 42℃ for 45 seconds
  5. Inoculate 950µL LB into vial
    • incubate at 37℃ with shaking for 1.5 hours
  6. Plate 1x/9x


Electrophoresis/Gel Protocols

1% Agarose Electrophoresis Gel

  1. Add 0.35 g agarose to 35 mL 1x TAE in 100mL conical flask
  2. Heat in microwave for 35 seconds
  3. Swirl and heat in microwave for 25 seconds
  4. Swirl and heat in microwave for 15 seconds
  5. Swirl and heat in microwave for 7 seconds
  6. Swirl and ensure no ‘floaties’
  7. Cool outside of conical flask with water until ‘hand not’
  8. Pour into gel mold and add well comb

Gel Extraction

  1. Use ethanol-wiped scalpel to excise appropriate bands
  2. Mix and incubate at 50°C for 10 min
    • Vortex every 2 mins until gel slice is completely dissolved
  3. Place nucleospin column into 2mL collection tube
    • Add sample
    • Centrifuge at 11,000 xg for 1 minute
    • Discard throughflow and place column back in same tube
  4. Add 700 mL Buffer NT3
    • Centrifuge at 11,000 xg for 1 minute
    • Discard throughflow and place column back in same tube
  5. Repeat step 4
  6. Centrifuge at 11,000 xg for another minute
    • To remove buffer
      • Discard throughflow
      • Centrifuge at 11,00 xg for add minute
      • Place column in a clean, labelled 1.5 mL tube
  7. Add 25 mL prewarmed (50°C) Buffer NE
    • Incubate at 50°C for 5 min
    • Centrifuge at 50 xg for 1 minute
    • Centrifuge at 11,000 xg for 1 minute

Plasmid Transformation Protocol

  1. Aliquot 1 ml media into 1.5 mL tubes
    • Place in 42°C waterbath
  2. Prechill labelled 14 mL round-bottom falcon tubes
    • Add mL cell culture to tube
    • Add appropriate amount of ligase rxh (2-2.5 L)
    • Incubate in nice for 20 minutes
  3. Heat shock cells by placing at 42℃ for 45 seconds in waterbath
    • Place on ice for 2 minutes
  4. Add 950 mL preheated media to each tube
    • Incubate at 37℃ with 215 rpm shaking for 1.5 hr -> 20 minutes

Plating

  1. Plate on LB-antibiotic plates
    • Plate 100 ml for 1x transformation
    • Plate 100 mL 9x centrifuge remaining transformation at 2000 xg for 5 minutes and resuspended pellet in 100 L media

Plates Protocol

  1. Follow LB Agar Recipe
    • Make sure to put stirring bar in water
    • Needed to make into homogenous gel
    • Needs to be sterile
  2. Put into Autoclave
    • Lid should not be too tight
  3. Put in ice bath 42°C
    • Cool till not burning hand
    • Put on stirring plate
  4. Put sterilized plates in Lamenia shield
  5. Using micropipette put .5 mL of chlor. And amp. agar solution
    • 1000x dilution
    • Amp. has to be defrosted in dark drawer
  6. Pour solution into plates
    • Thin layer fill bottom
    • Take lid slightly off to prevent condensation

QIA Prep Spin Mini Prep Kit

  1. Example for 18 mL LB add
    • 18 L20 mg/ L Kanamycin (antibiotic)
    • 18 L 50 mg/ L ampicillin
  2. Aliquot 3.5 mL into labelled round bottom falcon tubes
  3. Using sterile toothpicks- pick a single colony forming unit (cfu) and inoculate tube
    • Incubate overnight at 37°C with 215 rpm shaking
  4. To 100 mL 60% glycerol stock, add 300mL overnight culture to appropriately labelled tube
    • Store at -80°C
  5. Pellet remaining cells by centrifugation in 1.5 mL tube at 13,2000 rpm for 1 min
    • Discard supernatant and repeat
  6. Resuspend pellet in Buffer P1 250 mL
    • Add 250 L Buffer, P2 and mix by inverting 10x
    • Add 350 L Buffer N3 and immediately mix by inverting 10x
  7. Centrifuge at 13, 200 rpm for 10 minute
  8. Pipet supernatant into labelled QIA prep spin column
    • Centrifuge at 13, 200 rpm for 1 minute
    • Discard thoroughflow
  9. Wash column by adding .5 mL Buffer PB *regular for low copy number plasmids*
    • Centrifuge at 13, 200 rpm for 1 minute
    • Discard thoroughflow
  10. Wash by adding .75 mL Buffer PE
    • Centrifuge at 13, 200 rpm for 1 minute
    • Discard thoroughflow
    • Centrifuge for an addition minute to ensure removal of residual wash buffer
  11. Place spin column in a clean, labelled 1.5 mL tube
    • Add 50 LEB to center of column & let stand for 1 minute at room temperature
    • Centrifuge at 12,000 rpm for 1 minute
    • Store at -20℃

Making Motility Plates

  1. Follow Motility Plate Recipe
    • Recipe
      • 5 grams of Tryptone
      • 2.5 grams of NaCl
      • 1.25 grams of Agar
      • 500 mL H2O
    • Make sure to put stirring bar in water
    • Needed to make into homogenous gel
    • Needs to be sterile
  2. Put into Autoclave
    • Lid should not be too tight
  3. Put in water bath 42°C
    • Cool till not burning hand
    • Put on stirring plate
  4. Put sterilized plates in Lamenia shield
  5. Pour solution into plates
    • Thin layer fill bottom
    • Take lid slightly off to prevent condensation

Making TSA Plates

  1. Follow TSA Plate Recipe
    • Recipe
      • 30 g of TSB
      • 15 g of Agar
      • 1 Liter of H20 18 mΩ
    • Make sure to put stirring bar in water
    • Needed to make into homogenous gel
    • Needs to be sterile
  2. Put into Autoclave
    • Lid should not be too tight
  3. Put in water bath 42°C
    • Cool till not burning hand
    • Put on stirring plate
  4. Put sterilized plates in Lamenia shield
  5. Pour solution into plates
    • Thin layer fill bottom
    • Take lid slightly off to prevent condensation

Yarrowia Testing

Growing Yarrowia Culture

  1. Pipette 5 mL of TSB into a culture tube
  2. Use a wand to swipe a colony of Yarrowia from an already grown plate of Yarrowia
  3. Place wand with colony of Yarrowia into culture tube
    • Flick wand for 15 seconds
  4. Incubate overnight at 27°C with 200 rpm shaking

Preparing Chitinase Testing Enzyme

  1. Measure out 2 g of chitinase from Streptomyces Griseus
    • Place into 2 mL microcentrifuge tube
  2. Resuspend chitinase
    • Pipette 0.100 mL of PBS into tube
    • Vortex tube for 15 seconds
  3. Store in -20°C freezer

Chitinase Testing Against Yarrowia

  1. Dilute Yarrowia culture 1:000
    • Use 1.5 mL microcentrifuge tube
      • Pipette .999 mL of TSB into tube
      • Pipette .001 mL of grown Yarrowia culture into tube
      • Inoculate tube by flicking 4-6 times
  2. Pipette .300 mL of diluted Yarrowia culture on TSA plate
    • Use L-spreader to spread diluted Yarrowia culture
    • Let plates dry in fume hood for 30 minutes
  3. Perform steps 4-6 a total of 3 times on 3 separate TSA plates
  4. Using a pipette, spot 4 0.005 mL spots of chitinase enzyme on plate
    • 2 spots diluted to 10 mg/mL
    • 2 spots diluted 5 mg/mL
  5. Using a pipette, spot 6 0.005 mL spots of chitinase enzyme on plate
    • 2 spots diluted to 10 mg/mL
    • 2 spots diluted 1 mg/mL
    • 2 spots diluted 0.1 mg/mL
  6. Using a pipette, spot 4 0.005 mL spots of chitinase enzyme on plate
    • 2 spots diluted to 0.1 mg/mL
    • 2 spots diluted 0.01 mg/mL
  7. Use one plate without Yarrowia as a negative control
  8. Take one plate with Yarrowia spread and pipette 4 0.005 mL spots of PBS
    • Use plate as positive control
  9. Cover plates with a plastic bag and place all plates into an incubator
    • Incubate overnight at 27°Ce

Chitinase And Cinnamaldehyde Spotting Testing Against Yarrowia

  1. Pipette 0.300 mL of diluted Yarrowia culture on TSA plate
    • Use L-spreader to spread diluted Yarrowia culture
    • Let plates dry in fume hood for 30 minutes
  2. Make discs
    • Using a holepunch, create 100 discs
    • Wrap discs in aluminum foil
    • Autoclave discs
  3. Soak 25 discs in each of the following
    • Chitinase enzyme from Streptomyces Griseus diluted to 10 mg/mL in 1/32 diluted cinnamaldehyde
    • Chitinase enzyme from Streptomyces Griseus diluted to 5 mg/mL with 1/32 diluted cinnamaldehyde
    • Chitinase enzyme from Streptomyces Griseus diluted to 10 mg/mL with 1/32 diluted cinnamaldehyde
    • Chitinase enzyme from Streptomyces Griseus diluted to 5 mg/mL with 1/64 diluted cinnamaldehyde
  4. Place 4 of each of the previous discs on Yarrowia covered TSA plates
  5. Cover plates with a plastic bag and place plates in incubator
    • Incubate overnight at 27°C
Contact us @iGEMLabPats or iGEM@carrollhs.org