Revision as of 18:32, 16 October 2018

iGEM EPFL 2018

Design

Vaccine
Follow Up

Index

Preface

<

Encapsulin Antigen Delivery

Encapsulin

Our Vaccine Design

Library Expression Process

Introduction

How Neoantigen-based Cancer Immunotherapy Works

[FIGURE HERE]

A specific neoantigen that is differentially expressed on tumour cells, and not healthy cells is supplied to the patient through a vaccine formulation. Dendritic cells uptake the neoantigen from the vaccine formulation. Alongside the neoantigen, the vaccine formulation supplies an adjuvant that activates the dendritic cell to uptake foreign material, and perceive them as danger signals.

The dendritic cell then processes the neoantigen and cross-represents it on MHC1 complexes, where naïve CD8+ T cells can recognize it. Once the naïve CD8+ cells recognize the neoantigen, they mature into cytotoxic CD8+ T cells that specifically attack cells that express this neoantigen; in this case, the tumour cells.

Rising Importance of Cancer Vaccination

The immunogenicity of Neoantigens leading to T cell activation has long been demonstrated in patients (Wolfel et al., 1995). In fact, preclinical and clinical data has already shown that neoantigen specific cytotoxic T lymphocytes (CTLs) constitute the most potent T cell populations for tumour rejection (Wolfel et al., 1995; Matsushita et al.). Still, the natural production of neoantigen specific CTLs by a patient’s immune system is scarce because of low clonal frequency and ineffective presentation of neoantigens (Alexandrov et al., 2013; Zhu et al., 2017). Therefore, cancer vaccines or adjuvant cancer therapies (ACT) are crucial to potentiate immunity against neoantigens for cancer treatment. Accordingly, a large number of strategies have been progressed for the creation, formulation and delivery of various cancer vaccines; for example, whole tumor cell lysate, nucleotide (mRNA/ DNA), protein or peptides-based vaccines, dendritic cell (DC) based vaccines, viral vectors, biomaterial-assisted vaccines, and so on. However, it remains challenging to develop a universal and effective delivery strategy to target neoantigen-based vaccines to professional antigen-presenting cells (APCs) for eliciting robust and potent T cell responses against cancer.

Encapsulin Antigen Delivery

.... (Matsushita et al., 2012; Tran et al., 2014; Tran et al., 2016; Tran et al., 2017) .... (Alexandrov et al., 2013; Zhu et al., 2017)

Biomaterial Platform Assisted Delivery

(Liu et al., 2014; Fifis et al., 2004) ... (Janssen et al., 2005) ... (Amigorena and Savina, 2010)

Design Constraints for an efficient antigen delivery platform

Blablabla

Encapsulin

....

Encapsulin Nanocage protein profile

... (Sutter et al., 2008)

Encapsulin in Literature

Blablabla

Our Vaccine Design

....

Genetic Incorporation of Neoantigen

Blablabla

Cell free expression of Encapsulin

Blablabla

Heat Purification of Encapsulin

Blablabla

Library Expression Process

References

Wolfel, Thomas, et al. "A p16INK4a-insensitive CDK4 mutant targeted by cytolytic T lymphocytes in a human melanoma." Science, 269.5228 (1995): 1281-1284.
Matsushita, Hirokazu, et al. "Cancer exome analysis reveals a T-cell-dependent mechanism of cancer immunoediting." Nature, 482.7385 (2012): 400.
Tran, Eric, et al. "Cancer immunotherapy based on mutation-specific CD4+ T cells in a patient with epithelial cancer." Science, 344.6184 (2014): 641-645.
Tran, Eric, et al. "T-cell transfer therapy targeting mutant KRAS in cancer." New England Journal of Medicine, 375.23 (2016): 2255-2262.
Tran, Eric, Paul F. Robbins, and Steven A. Rosenberg. "'Final common pathway'of human cancer immunotherapy: targeting random somatic mutations." Nature immunology, 18.3 (2017): 255.
Alexandrov, Ludmil B., et al. "Signatures of mutational processes in human cancer." Nature, 500.7463 (2013): 415.
Zhu, Guizhi, et al. "Efficient nanovaccine delivery in cancer immunotherapy." ACS nano, 11.3 (2017): 2387-2392.
Liu, Haipeng, et al. "Structure-based programming of lymph-node targeting in molecular vaccines." Nature, 507.7493 (2014): 519.
Fifis, Theodora, et al. "Size-dependent immunogenicity: therapeutic and protective properties of nano-vaccines against tumors." The Journal of Immunology, 173.5 (2004): 3148-3154.
Janssen, Edith M., et al. "CD4+ T-cell help controls CD8+ T-cell memory via TRAIL-mediated activation-induced cell death." Nature, 434.7029 (2005): 88.
Amigorena, Sebastian, and Ariel Savina. "Intracellular mechanisms of antigen cross presentation in dendritic cells." Current opinion in immunology, 22.1 (2010): 109-117.
Sutter, Markus, et al. "Structural basis of enzyme encapsulation into a bacterial nanocompartment." Nature structural & molecular biology, 15.9 (2008): 939.

Introduction

Through our interviews with health specialists and oncology experts (more information in Integrated human practices) we assessed the necessity to have a non-invasive treatment companion to determine our vaccine efficacy. Here, we want to provide a proof-of-concept that would allow us to monitor the patient’s response by using the same set of identified neoantigens used for our vaccine. We also believe that it is important to be able to detect relapses in early melanoma stages, as the survival rates for patients dramatically drop to 20% in stage IV compared to 99% survival rate in stage I and II (Siegel et al., 2018).

To answer these needs, we envision a new generation of diagnostic tools by which a liquid peripheral blood draw could give an accurate prognosis regarding the elimination of the tumor cells and, by targeting specific biomarkers, be a good predictor of relapse. This requires a detection system that is both highly sensitive and specific since single base pair polymorphisms, barely detectable in the blood, can lead to tumorigenesis.

Our idea is to develop a Cas12a detection system coupled to an amplification step. This detection system is rapid, sensitive and specific enough to reliably detect these biomarkers.

Index

Introduction

Biomarkers and Liquid Biopsies

Biomarkers and Liquid Biopsies

Recently, several studies have shown that non-invasive liquid biopsy methods are a promising way to detect cancer relapse and monitor tumor regression (Heitzer et al., 2017). Liquid biopsies represent a fast, reliable and easy way to obtain samples compared to the invasive nature of solid biopsies which are generally time-consuming, difficult to perform frequently and not without some risks to the patient.

ctDNA
miRNA

ctDNA - A look at the tumor DNA

Circulating free DNA (cfDNA) is a common term that refers to all the DNA fragments that are present in the blood. This fragmented DNA is thought to originate from apoptotic cells (Harris et al., 2016). In cancer patients the proportion of cfDNAs from necrotic tumor cells - known as “circulating tumour DNA” (ctDNA) - represents a large part of the circulating DNA. These short DNA fragments of size ranging from 100bp to 200bp - with a peak at 145bp (Underhill et al., 2016) - contain virtually all the possible genetic defects that can be found in the original tumor cell population, including somatic point mutations and translocations (Harris et al., 2016; Calapre et al., 2017). Moreover, literature has shown that levels of ctDNA in the blood are correlated with progression or remission of disease in several cancers, including melanoma (Gray et al., 2015; Girotti et al., 2016; Tsao et al., 2015; Calapre et al., 2017).

Our goal using ctDNA as biomarkers is to come up with a personalized follow-up, and the personalized touch comes back again from our implemented bioinformatic software: Ginga. Indeed, Ginga takes as an input the genetic sequence of the tumor, to generate not only a list of neoantigens that will form the basis of our vaccine, but also a library of another molecular alteration specific to the tumor, namely chromosomal rearrangements, that we will target for relapse detection.

Overview of the release of ctDNA in the blood by necrotic cancer cells. These are, along with some miRNAs, promising biomarkers present in the blood.

Vaccine monitoring through point mutation

Our goal here is to detect the point-mutated sequences that code for the neoantigens we have selected for our vaccine. More precisely, we seek to quantify the presence of these sequences in the bloodstream through ctDNA. This gives us the opportunity to monitor tumor remission directly by studying the patient’s blood.

Cancer relapse detection through chromosomal rearrangement

As part of any cancer therapy, there is always a need to be vigilant against any recurrence, since it can occur at any time: indeed, although the targeted cell populations have been eliminated, other cells may have survived and resurface after some time. To address this problem, we want to detect the sequences of the individualized junctions identified using our bioinformatic pipeline directly in the blood, using our CRISPR-Cas12a based assay. The detection of such sequences will alert the patient of a potential relapse and the need for a closer follow-up, which can have a lead time of up to 11 months in detecting relapses over clinical established methods in some types of cancers, according to Olsson et al., 2015.

Cancer relapse detection through miRNA

MicroRNAs (miRNAs) are short (18-24 nt) non-coding RNA molecules which act as post-transcriptional regulators of gene expression. Over the years, miRNAs have been proved to play a critical role in a variety of different diseases and in several aspects of cancer (Larrea et al., 2016). Moreover, miRNAs are remarkably stable in human plasma (Mitchell et al., 2008), and several miRNAs circulating in the blood have recently been shown to be dysregulated (either over- or under-expressed) in patients with certain cancers, including melanoma, with respect to healthy subjects (Mirzaei et al., 2016). For these reasons, miRNAs have been proposed as potential prognostic and diagnostic biomarkers for melanoma, which makes them suitable candidates for the follow-up part of our project as well.

Previous iGEM teams (e.g. NUDT China 2016 team) have shown promising results with Rolling Circle Amplification of miRNAs by means of dumbbell-shaped probes (details in “Amplification”). Our aim is to investigate whether is possible to combine this dumbbell probe design with a Cas12a system to achieve a sensitive and specific detection assay.

Cas12a

To answer the need for a fast and robust detection method we chose to work with the newly characterized Cas12a (Cpf1) protein.

CRISPR-Cas (clustered regularly interspaced short palindromic repeats–CRISPR-associated) systems are originally inspired by an antiviral defense mechanism used by prokaryotes which work by recognizing and cleaving the foreign DNA/RNA. They have, in the recent years, widely been used as a gene editing tool for their ability to find and cut at a specific site allowing the insertion of a desired sequence. This target sequence is what we call the activator.

In the case of Cas12a this activator is composed of two different strands: the target strand (TS) and the non-target strand (NTS). The NTS requires a T-rich protospacer adjacent motif (PAM) sequence whereas the TS contains the sequence we want to detect. CRISPR scans all PAM sequences in the genome and compares its loaded guide RNA (gRNA) with all possible adjacent target sequences. When Cas12a finds its target, it undergoes a conformational change and cleaves the activator: its double stranded DNA (dsDNA) target. It is also worth mentioning that Cas12a proteins retains the capacity to recognize and cleave ssDNA without any PAM sequence.

As a result of its conformational change upon target recognition, Cas12a unleashes a non-specific endonuclease activity (i.e. collateral cleavage) virtually against any single stranded DNA (ssDNA). Each activated Cas12a protein can cleave huge numbers of ssDNA molecules, and this is what makes this system so suitable for detection, as it greatly amplifies the signal. As explained more in detail in “Fluorescent readout”, by coupling this property to a single-stranded FQ reporter, we can hugely increase even very small signals, which means higher sensitivity for this system.

In our assays we worked with the purified Lba-Cas12a (type V-A CRISPR) extracted from Lachnospiraceae bacterium ND2006 and provided by New England BioLabs.

Design of the gRNA

The gRNA must contain a 17 to 24bp complementary sequence to the dsDNA of interest. For activating Cas12a and further collateral cleavage, It is crucial that the activator incorporates a T-rich PAM sequence, TTTN, 5’ of the target sequence. Once the protein has recognized the PAM sequence and the gRNA has bound the complementary sequence, the staggered cut will occur around 18 bases 3′ of the PAM and leaves 5′ overhanging ends (Zetsche et al., 2017).

We ordered the ssDNA from which the gRNA was transcribed using a T7 polymerase. An appropriate design of the ssDNA consists of three separate part in the following order:

T7 promoter (5’-ctTAATACGACTCACTATAgg-3’): This is needed for the transcription and the sequence will not appear in the final gRNA. To increase the polymerase efficiency, it is recommended to add 1, 2 or 3 G’s right after the promoter (New England BioLabs) as well as adding CT upstream of it (Baklanov et al., 1996)
Scaffold (5’-TAATTTCTACTAAGTGTAGAT-3’): This sequence can change according to the Cas12a species - the one shown here is specific for LBa Cas12a (Zetsche et al., 2017)
Spacer: It is the gRNA sequence that is complementary to the activator sequence (TS). For the ctDNA group we chose to use shorter guide sequences (17 bp rather than 20) for detecting both single base polymorphism and chromosomal rearrangements, based on the work done by Li et al., 2018, where they proved that shorter guide sequences yielded higher cleavage specificity

The T7 polymerase needs a double stranded region to bind to. It is thus necessary to order a primer for this region. The rest of the sequence can stay single stranded for a lower cost.

...

Cas12a with its guide RNA composed of the direct repeat, also called the scaffold, and the spacer.

Fluorescent readout

Following Chen et al., 2018, we designed a Cas12a detection assay based on the cleavage of DNaseAlert (IDT), which are fluorescence-quenched oligonucleotide probes that emit a fluorescent signal after DNAse degradation (Integrated DNA Technologies).

By exploiting indiscriminate cleavage of the Cas12a protein that is triggered upon target recognition, we were able to obtain a fluorescent reading following the cleavage of our reporter molecules. This allows for a rapid and sensitive detection of the dsDNA activator.

Cas12a assay principles: Activation of Cas12a unleashing the proteins endonuclease activity against ssDNA (here a Fluorophore-Quencher reporter).

Sample preparation

Amplification

ctDNA
miRNA

Due to the very low concentration of ctDNA in blood it is necessary to amplify the target prior to Cas12a detection assay. We chose PCR as it is a common practice in most laboratories. It is important to note that it is possible to replace this method with an isothermal amplification, like LAMP or RPA, to get this assay closer to point of care.

One of the limitation of a Cas12a is the need for a PAM sequence near the target we want to detect. Following Li et al., 2018 and to overcome this limitation, we designed primers that would add the PAM sequence by introducing synthetic mutations. This enables us to virtually target any desired sequence regardless of existence of a T-rich PAM sequence near the target.

Amplification of the target fragment and introduction of the PAM sequence synthetically.

Although miRNAs are potentially very valid candidates as biomarkers, they are associated with some hurdles (particularly low abundance) which are not completely overcome by currently existing detection methods (Miao et al., 2015).

Among different recent amplification techniques, Rolling Circle Amplification has been proved to be one of the most suitable, thanks to its robustness, simplicity, specificity and high sensitivity (Cheng et al., 2009). Rolling-Circle Amplification (RCA) is an isothermal amplification (contrarily for instance to Polymerase Chain Reaction) where miRNA (or another short RNA or DNA sequence) is amplified by means of a circular DNA template (i.e. a probe) and a special DNA (or RNA) polymerase: the miRNA acts as a primer, with the RCA product (i.e. the amplicon) consisting in a concatemer containing tens to hundreds of tandem repeats that are complementary to the probe (Ali et al., 2014).

Toehold-initiated Rolling Circle Amplification (tiRCA), in particular, employs phi-29 DNA polymerase and is based on structure-switchable dumbbell-shaped probes (Deng et al., 2014): upon hybridization with the specific target miRNA, one of the two strands of the double-stranded region of the probe is displaced, resulting in an "activated" circular form of the probe with triggers the start of the RCA reaction. The complete mechanism of RCA is shown in the Figure below:

Schematic representation of the tiRCA reaction. miRNA is represented in magenta, the dumbbell-shaped probe is shown in light blue and the amplicon in green.

Although it is the probe - and not directly the miRNA - to be amplified, RCA allows to significantly increase the concentration of the miRNA sequence in solution: indeed, since a large portion of the probe is complementary to the miRNA, the amplicon of the probe will incorporate several copies of the original miRNA. This can theoretically be exploited to increase the sensitivity of an assay for quantification of miRNA. As later explained, while our Amplification step was mostly inspired by Qiu et al., 2018, we explored a new, ambitious Detection step after RCA based on Cas12a (and not on Cas9 and split reporter proteins). This implied designing new probes with specific characteristics for Cas12a, as explained in the following sections.

Our probes

The first miRNA we decided to target is let-7a-5p: this miRNA is not among the ones found to be relevant as melanoma biomarkers (as instead are other miRNAs of the let-7 family) (Larrea et al., 2016; Mirzaei et al., 2016); nonetheless, we thought it might be the best option to start from it as a proof of concept, because it was already well characterized for Rolling Circle Amplification (RCA) by Deng et al., 2014 and Qiu et al., 2018

Qiu et al., 2018, as well as our colleagues from the related 2016 iGEM team of NUDT China, had designed their probes in order for the amplicons to be recognized by a CRISPR-Cas 9 system. Since our project deals instead with CRISPR-Cas 12a, despite the miRNA sequence being the same, we therefore had to modify the sequences of our probes accordingly. More specifically, we had to adapt the PAM sequence (placed on the amplicon of the probe) in order to match our Cas protein (we worked with LbCpf1): while the requirement for Cas9 was NGG on the 3' of the amplicon, in our case we needed to have TTTN on the 5'. More details on the design are described in the section "Detailed design".

We wanted to test different designs of probes: some were conceived to have the PAM at the beginning of the larger loop of the amplicon (as in the probes from NUDT China), but we also investigated the case where the PAM was placed on the double-stranded part (the stem) instead; the sequence on the uncostrained large loop was also changed among the probes.

We ordered 10 different probes; the sequence and related notes are described in the Table below.

Name	Sequence (5'->3')	Description
Probe 1	pACAACCTACTACCTCAAACGTAGGTTGTAT AGTTTAAAGGGAGTCGGCGGAACTAT	Probe designed by our team for Cas 12a. PAM on the large loop of the amplicon.
Probe 2	pACCTCATTGTATAGCCCCCCCCTGAGGTAG TAGGTTGCCCAACTATACAACCTACT	Probe from Deng et al., 2014 and Qiu et al., 2018 (respectively referred to as "SP-let-7a" and "let-7a probe 1"), designed for Cas9. Used as a control for the efficiency of the amplification.
Probe 3	pACCTCACCCCCCCCCCCCCCCCTGAGGTAG TAGGTTGCCCAACTATACAACCTACT	Probe from Qiu et al., 2018 ("let-7a probe 2"), designed for Cas9. Used as a control for the efficiency of the amplification.
Probe 4	pACCTCAAAAAAAAAAAAAACCCTGAGGTAG TAGGTTGCCCAACTATACAACCTACT	Probe from Qiu et al., 2018 ("let-7a probe 3"), designed for Cas9. Used as a control for the efficiency of the amplification.
Probe 5	pACCTCATTTTTTTTTTTTTCCCTGAGGTAG TAGGTTGCCCAACTATACAACCTACT	Probe from Qiu et al., 2018 ("let-7a probe 4"), designed for Cas9. Used as a control for the efficiency of the amplification.
Probe 6	pACAACCTACTACCTCAAACGTAGGTTGTAT AGTTTAAAGGGGGGGGGGCGAACTAT	Probe designed by our team for Cas 12a. PAM on the large loop of the amplicon. Large loop with repetitive sequence of Gs.
Probe 7	pACAACCTACTACCTCAAACGTAGGTTGTAT AGTTTAAAGGGAGTGGTTTAAACTAT	Probe designed by our team for Cas 12a. PAM on the stem. Large loop made of 8 bases.
Probe 8	pACAACCTACTACCTCAAACGTAGGTTGTAT AGTTTAAAGGGAGTCGGCGGTTTAAACTAT	Probe designed by our team for Cas 12a. PAM on the stem. Large loop made of 12 bases.
Probe 9	pACAACCTACTACCTCAAACGTAGGTTGTATAG TTTAAAGGGGGGGGGGGGGGCGTTTAAACTAT	Probe designed by our team for Cas 12a. PAM on the stem. Large loop made of 16 bases.
Probe 10	pACAACCTACTACCTCAAACGTAGGTTGTAG AGTTTAAAGGGAGTCGGCGGAACTCT	Probe designed by our team for Cas 12a. PAM on the large loop of the amplicon. Single base mismatch on the stem with respect to the target miRNA sequence.

Note: The sequences of the probes include a phosphate group at the 5' end (in order to ligate the probes). We nonetheless always ordered the oligonucleotides without the phosphate (because the cost was significantly lower) and then performed phosphorylation by means of T4 Polynucleotide Kinase prior to ligation.

For each probe we ran an analysis of the secondary structure by means of available servers online (NUPACK, MFold): in all cases the structure of the probe, of its amplicon and of the series of 4-5 copies of the amplicon were tested in order to check the absence of unwanted secondary structures. We also used RNAstructure DuplexFold to test the secondary structure of the dimer probe/miRNA: we were not able to find a more suitable tool for the analysis of the duplex; nonetheless we believe that this server, despite its limitations with respect to our analysis (no possibility of having a circular probe, no possibility to have a DNA/RNA dimer), was enough to show qualitatively the interaction between our probe and let-7a.

SYBR Green I

Two main alternatives are suitable in order to test the efficacy of Rolling Circle Amplification (Deng et al., 2014; Qiu et al., 2018). First of all, the amplicons can be tested by means of an agarose gel to verify the size; nonetheless, this method shows some limitations because of the large size of the amplicons.

A more valid alternative is instead to perform a real-time fluorescence measurement by means of SYBR Green I.

SYBR green I is an intercalating dye that preferentially binds to minor grooves of double-stranded (dsDNA) (Zipper et al., 2004). It has also been shown to bind to single-stranded DNA (ssDNA) and RNA (for which instead SYBR Green II is a more suitable option (Sigma-Aldrich)), but with a significantly lower performance (Vitzthum et al., 1999).

When complexed with nucleid acid, SYBR Green I absorbs blue light (maximum excitation wavelength is 497 nm) and emits green light (emission peak at 520 nm) (Sigma-Aldrich), which makes it suitable for quantification - by means of a plate reader - of the DNA amplicons (i.e. the reverse complement of the probes) from our Rolling Circle Amplification (RCA).

Indeed, since we verified in all cases the absence of unwanted secondary structures (more details in Detailed Design), the stems in the probes and in the amplicons are the only double-stranded targets to which SYBR Green I can preferentially bind: this allows to observe the increase over time in the size of the amplicon during RCA.

"Scheme for miRNA detection by TIRCA in vitro" [Reproduced from Deng *et al.*, 2014 (Figure 1A)].

Detailed design

This section is more specifically dedicated to the reasonings behind the sequences of our probes.

Analysis of given probes

We started our design from the analysis of one probe from Qiu et al., 2018, namely "let-7a probe 1" (Probe 2 for us). The sequence was the following one:

5’-pACCTCATTGTATAGCCCCCCCCTGAGGTAGTAGGTTGCCCAACTATACAACCTACT-3’

where:

the regions in italic are those belonging to the loops of the hairpin
the regions in orange and green are those belonging to the stem of the hairpin (and which are complementary with each other)
the underlined region is the one complementary to the miRNA (let-7a-5p: UGAGGUAGUAGGUUGUAUAGUU)

Secondary structure of "let-7a probe 1" (Probe 2 for us). dG=-10.40.

Such probe consists of a double-stranded stem part, a 10 bases-long loop (which from now on we will refer to as "small loop" - on the right in the figure above) and a 16 bases-long loop ("large loop" - on the left). As we can observe, the toehold region of the probe (i.e. the part on the small loop where the miRNA binds) is 7 bases long, in accordance with Deng et al., 2014, who proved it to be the optimal length to achieve both sensitivity and specificity.

The amplicon of such probe is therefore*:

5'-AGTAGGTTGTATAGTTGGGCAACCTACTACCTCAGGGGGGGGCTATACAATGAGGT-3’

where:

the sequence in bold is the one which is complementary to the gRNA (except for two mismatches, which are highlighted) and the region in red is the PAM sequence (in this case single stranded).

We emphasize here that the PAM sequence is on a single-stranded part of the amplicon (the one complementary to the large loop of the probe): therefore, such single-stranded PAM can only be present on the amplicon, and not on the probe itself (as would have been instead if the PAM was on a double stranded part).

The gRNA sequence (as indicated by Qiu et al., 2018) is:

5’-ACUGUACAAACUACU|ACCUCA(GUUUUAGAGCUAGAAAUAGCAAGUUAAAAUAAGGCUAGUCCG) -3’

with the scaffold region indicated in parentheses. The region out of the brackets is the spacer, binding to the amplicon, and the sequence in italic corresponds in particular to the part of the spacer binding on the loop of the amplicon (with the rest of the spacer binding to the stem). The sign | indicates the position where the gRNA binds to the point on the amplicon where each new "copy" of the amplicon is considered to start (i.e. the point where the 3' of a "subunit" of the amplicon and the 5' of the successive subunit are linked together).

More specifically, we can notice that in this design the spacer coincides with the reverse complement of let-7a, with the exception of the two mismatches and of a missing A at the beginning. The template of the gRNA for Cas9 would therefore be:

5'-[reverse complement of miRNA]-[scaffold]-3'

The expected interaction between amplicon and gRNA is outlined in the figure below:

*On the left:* Generic interaction between a target and a gRNA for Cas9 [Reproduced from Xie and Yang, 2013 (Figure 1A)]. *On the right:* Predicted interaction of one subunit of the amplicon of Probe 2 with the gRNA.

We can observe how the PAM sequence (in red in the figure) is located at the very beginning of the large loop in the amplicon, whereas the gRNA binds to the whole stem part and partially to the small loop.

*Here and after, when referring to the "amplicon sequence", we only show one single copy of the reverse transcript of the probe. The actual amplicon, by definition of Rolling Circle Amplification, is of course made instead of sequential copies of this "unitary" sequence.

Comparison Cas9/Cas12a

We then tried to design our own probes for Cas 12a, working backwards from the gRNA.

Contrarily to Cas 9, for which the PAM must be on the 3' side of the target, for Cas12a the PAM must be on the 5’ side of the target instead. This implies that the scaffold part of the gRNA must be on the 5’ side (instead of the 3’) as well (Figure below).

"Schematic representation of Lba Cas12a nuclease sequence recognition and DNA cleavage". [Reproduced from New England BioLabs].

Below is shown a direct comparison of the interaction between target amplicon and gRNA for Cas 9 and Cas 12a.

Comparison of the interaction between target amplicon and gRNA for Cas 9 (*on the left*) and Cas 12a (*on the right*).

We therefore conclude that the template for our guide RNA for Cas 12a should be:

5’-(UAAUUUCUACUAAGUGUAGAU)NNNNNN|NNNNNNNNNNNNNNNN-3’ [gRNA template]

where the sequence in parentheses indicates the scaffold of the gRNA for LbCas12a. The sequence out of the brackets is the spacer, binding to the amplicon, and in particular the sequence in italic corresponds to the part binding on the loop of the amplicon.

The spacer is therefore 22 bases long (as let-7a-5p), 15 of which bind to the stem part of the amplicon and the remaining 7 bind to the small loop of the amplicon. Note that the gRNA for Cas9 from Qiu et al., 2018 was instead 21 bases long (15 and 6): we decided to add one more base at the end to completely match the length of the miRNA.

We can notice that also in this design the spacer has to coincide with the reverse complement of let-7a (as for Cas 9) . The template of the gRNA for Cas12a would therefore be:

5'-[scaffold]-[reverse complement of miRNA]-3'

Probes for Cas12a

From the template above we can therefore conclude that the gRNA for our Cas 12a system, designed as the one for Cas 9 from Deng et al., 2014, has to be:

5’-(UAAUUUCUACUAAGUGUAGAU)AACUAU|ACAACCUACUACCUCA-3’ [gRNA sequence]

From the specifications for the probe above (10 bases small loop, 16 bases large loop) and from the gRNA sequence, the template amplicon therefore needs to have the following structure:

5’-ATAGTTNNNNNNNNNNNNTTTNAACTATACAACCTACNNNTGAGGTAGTAGGTTGT-3’ [amplicon template]

We then proceeded to define the bases for the Ns, aiming not to have unwanted minor secondary structures (e.g. smaller loops) in the loops. This was done mostly by considering pairing principles, e.g. avoiding non-Watson-Crick interaction (e.g. T-G) which might be thermodynamically favoured or trying not to have complementary bases with more than 1 base in between (which might lead to hairpin loops). In all cases, the minimum free energy structure (MFE) was plotted by means of the available software (NUPACK, Mfold), both for the amplicon and the probe - i.e. its reverse complement-, to check that the intended dumbbell shape was indeed achieved.

This lead us to the sequence of Probe 1 and Probe 6 (Probes from 2 to 5 were the probes for Cas 9 from Deng et al., 2014 and Qiu et al., 2018).

-----

We also wanted to test the case of probes with the amplicon having the PAM sequence not on the large loop, but on the stem instead (i.e. a double-stranded PAM, as usually required in Cas systems, and not single-stranded). We considered in this case three different alternatives:

Changing 4 bases in the large loop in order for them to be complementary to the PAM sequence, without adding more bases. This leads to a 19 bases-long stem, a 10 bases-long "small" loop and a 8 bases-long "large" loop. The template sequence of the amplicon is the following one:

5’-ATAGTTN'AAANNNNNNNNTTTNAACTATACAACCTACNNNTGAGGTAGTAGGTTGT-3’ (with N' being the base complementary to the N in the PAM)
Inserting 4 more bases complementary to the PAM on one end of the large loop (after ATAGTT), without changing any base. This leads to a 19 bases-long stem, a 10 bases-long small loop and a 12 bases-long large loop. The template sequence of the amplicon is the following one:

5’-ATAGTTN'AAANNNNNNNNNNNNTTTNAACTATACAACCTACNNNTGAGGTAGTAGGTTGT-3’
Inserting 4 more bases complementary to the PAM on one end of the large loop (after ATAGTT) and 4 more bases at the other end of the large loop (before the PAM sequence), in order to keep the original length of the large loop (16 bases). This leads to a 19 bases-long stem, a 10 bases-long small loop and a 16 bases-long large loop. The template sequence of the amplicon is the following one:

5’-ATAGTTN'AAANNNNNNNNNNNNNNNNTTTNAACTATACAACCTACNNNTGAGGTAGTAGGTTGT-3’

These three alternatives led, respectively, to Probe 7, Probe 8 and Probe 9.

-----

Finally, Probe 10 was designed in a way to have a mismatched base in the stem with respect to the let-7a sequence (highlighted in both strands below):

5'-pACAACCTACTACCTCAAACGTAGGTTGTAGAGTTTAAAGGGAGTCGGCGGAACTCT-3'

Design of gRNAs after new theory

Halfway through our project (see Notebook for more details), after starting testing our amplicons with Cas12a and the fluorescent reporter (DNase Alert), we realized that the probe itself (more specifically the product of RCA in the absence of miRNA, i.e. with no amplicon) was triggering the Cas system causing a very high fluorescence signal, comparable to the signal obtained for the samples with miRNA (i.e. with probe+amplicon).

We hypothesized that this was due to the fact the our Cas12a was working PAM-independently (more details in "New theory on Cas12a activation - miRNA" in the "Fluorescence readout" section). More specifically, our gRNA was meant to target the whole stem (and in addition 7 bases in the small loop) of the amplicon; since the stem is double-stranded, the target sequence for the gRNA is also present in the probe (in the opposite strand).

This would not have been a problem if the Cas had been working, as expected, PAM-dependently, because the PAM is only contained in the amplicon, not in the probe. Nonetheless, if the Cas does not need the PAM sequence, but simple recognizes a target from the sequence of the gRNA, then also the probe itself is recognized as a target. Moreover, since the concentration of the probe in the RCA reaction is higher than the expected concentration of amplicon, the signal from the probe behaves as noise, overcoming the signal of interest (i.e. from the amplicon).

We therefore designed a new guide RNA with the aim of targeting only the amplicon and not the probe. Our idea was to have the gRNA binding not on the stem, but on the large loop of the amplicon instead. Since the loops of the amplicon are single-stranded (and not double-stranded as the stem) this should allow the gRNA to target only the amplicon and not the probe, being the target sequence contained only in the amplicon and not in its reverse-complement: more specifically, we decided to design a guide RNA perfectly complementary to the large loop of the amplicon of Probe 1; in this way Probe 1, having on the contrary exactly the same sequence as the gRNA, should have never been targeted by this new gRNA.

As from the template gRNA above (5'-[scaffold]-[reverse complement of miRNA]-3'), the spacer was therefore modified to bind (with perfect match) to the large loop of the amplicon of probe 1.

Two different designs were tested, one - referred to elsewhere as "S_1" - binding to the whole large loop and to the first 4 bases after the large loop (for a total of a 20 bases-long spacer), and one - "L_1" elsewhere - binding only to the large loop (16 bases-long spacer). The complete sequences are the following ones:

5'-(UAAUUUCUACUAAGUGUAGAU)UAAAGGGAGUCGGCGGAACU-3' [gRNA sequence - S_1]

5'-(UAAUUUCUACUAAGUGUAGAU)UAAAGGGAGUCGGCGG-3' [gRNA sequence - L_1]

The comparison between the mode of action of the previous, original gRNA and the "new" ones is better explained in the figure below:

Comparison of the interaction between the gRNA and the amplicon for the three different gRNAs we investigated

Our detection scheme

We envision a follow-up based on repeated liquid biopsies in order to track the sequences that have been identified using our bioinformatic software, amplified by either PCR, isothermal amplification or RCA, and finally detected directly in the plasma using our Cas12a based system.

In the following example, the patient receives our treatment based on a cocktail of neoantigens presented on the surface of the encapsulin. The target population decreases with time, which suggests a response to our immunotherapy-based vaccine for a certain period of time but, due to the emergence of resistance or the survival of another cell population, the patient relapses. Chromosomal rearrangements and miRNAs are then the object of our detection, which would suggest a potential relapse. It is then strongly recommended for the patient to carry out a clinical test (biopsy, imaging, endoscopy) for confirmation.

Example of the use of biomarkers as a means of prognosis on the health of a patient with melanoma. In this case, the patient receives our vaccine as a treatment, and we assume that the treatment worked. This would be marked by a decrease in the concentration of ctDNA characteristic of the neoantigens targeted by our vaccine, ideally until their complete eradication. The condition of the patient stabilizes for a certain amount of time but it still ends up in relapse, which is nonetheless promptly marked by an increase of chromosomal rearrangements ctDNA fragments in the blood.

References

Zetsche, Bernd, et al. "Multiplex gene editing by CRISPR–Cpf1 using a single crRNA array." Nature biotechnology, 35.1 (2017): 31.
Olsson, E. et al. Serial monitoring of circulating tumor DNA in patients with primary breast cancer for detection of occult metastatic disease. EMBO Mol Med, 7, 1034–1047 (2015).
Calapre, Leslie, et al. "Circulating tumour DNA (ctDNA) as a liquid biopsy for melanoma." Cancer letters, 404 (2017): 62-69.
Heitzer, Ellen, et al. "The potential of liquid biopsies for the early detection of cancer." NPJ precision oncology, 1.1 (2017): 36.
"sgRNA Synthesis Using the HiScribe™ Quick T7 High Yield RNA Synthesis Kit" - New England BioLabs website. URL:https://international.neb.com/protocols/2015/11/24/sgrna-synthesis-using-the-hiscribe-quick-t7-high-yield-rna-synthesis-kit-neb-e2050 (Accessed 14/10/2018)
Baklanov, Michail M., Larisa N. Golikova, and Enrst G. Malygin. "Effect on DNA transcription of nucleotide sequences upstream to T7 promoter." Nucleic acids research, 24.18 (1996): 3659-3660.
Gootenberg, Jonathan S., et al. "Nucleic acid detection with CRISPR-Cas13a/C2c2." Science, (2017): eaam9321.
Harris, Faye R., et al. "Quantification of somatic chromosomal rearrangements in circulating cell-free DNA from ovarian cancers." Scientific reports, 6 (2016): 29831.
Siegel, R. L., Miller, K. D. and Jemal, A. "Cancer statistics, 2018." CA: A Cancer Journal for Clinicians, (2018) 68: 7-30.
Li, Shi-Yuan, et al. "CRISPR-Cas12a-assisted nucleic acid detection." Cell discovery, 4.1 (2018): 20.
Chen, Janice S., et al. "CRISPR-Cas12a target binding unleashes indiscriminate single-stranded DNase activity." Science, 360.6387 (2018): 436-439.
"DNaseAlert™" - Integrated DNA Technologies website. URL: https://eu.idtdna.com/site/order/stock/index/alert (Accessed 16/10/2018).
Gray, Elin S., et al. "Circulating tumor DNA to monitor treatment response and detect acquired resistance in patients with metastatic melanoma." Oncotarget, 6.39 (2015): 42008.
Girotti, Maria Romina, et al. "Application of sequencing, liquid biopsies, and patient-derived xenografts for personalized medicine in melanoma." Cancer discovery, 6.3 (2016): 286-299.
Tsao, Simon Chang-Hao, et al. "Monitoring response to therapy in melanoma by quantifying circulating tumour DNA with droplet digital PCR for BRAF and NRAS mutations." Scientific reports, 5 (2015): 11198.
Underhill, Hunter R., et al. "Fragment length of circulating tumor DNA." PLoS genetics, 12.7 (2016): e1006162.
Mitchell, Patrick S., et al. "Circulating microRNAs as stable blood-based markers for cancer detection." Proceedings of the National Academy of Sciences, 105.30 (2008): 10513-10518.
"EnGen Lba Cas12a (Cpf1)" - New England BioLabs website. URL: https://international.neb.com/products/m0653-engen-lba-cas12a-cpf1#Product%20Information_Notes (Accessed 24/09/2018)
Miao, Peng, et al. "Ultrasensitive detection of microRNA through rolling circle amplification on a DNA tetrahedron decorated electrode." Bioconjugate chemistry, 26.3 (2015): 602-607.
Cheng, Yongqiang, et al. "Highly sensitive determination of microRNA using target-primed and branched rolling-circle amplification." Angewandte Chemie International Edition, 48.18 (2009): 3268-3272.
Ali, M. Monsur, et al. "Rolling circle amplification: a versatile tool for chemical biology, materials science and medicine." Chemical Society Reviews, 43.10 (2014): 3324-3341.
Zipper, Hubert, et al. "Investigations on DNA intercalation and surface binding by SYBR Green I, its structure determination and methodological implications." Nucleic acids research, 32.12 (2004): e103-e103
"SYBR Green II RNA Gel Stain" - Sigma-Aldrich. Datasheet. URL: https://www.sigmaaldrich.com/content/dam/sigma-aldrich/docs/Sigma/Datasheet/2/s9305dat.pdf (Accessed 11/10/2018)
Vitzthum, Frank, et al. "A quantitative fluorescence-based microplate assay for the determination of double-stranded DNA using SYBR Green I and a standard ultraviolet transilluminator gel imaging system." Analytical biochemistry, 276.1 (1999): 59-64.
Larrea, Erika, et al. "New concepts in cancer biomarkers: circulating miRNAs in liquid biopsies." International journal of molecular sciences, 17.5 (2016): 627.
Mirzaei, Hamed, et al. "MicroRNAs as potential diagnostic and prognostic biomarkers in melanoma." European journal of cancer, 53 (2016): 25-32.
"SYBR Green I nucleic acid gel stain" - Sigma-Aldrich. Datasheet. URL: https://www.sigmaaldrich.com/content/dam/sigma-aldrich/docs/Sigma-Aldrich/Datasheet/s9430dat.pdf (Accessed 11/10/2018)
Deng, Ruijie, et al. "Toehold-initiated rolling circle amplification for visualizing individual microRNAs in situ in single cells." Angewandte Chemie, 126.9 (2014): 2421-2425.
Qiu, Xin-Yuan, et al. "Highly Effective and Low-Cost MicroRNA Detection with CRISPR-Cas9." ACS synthetic biology, 7.3 (2018): 807-813.
Zadeh, Joseph N., et al. "NUPACK: analysis and design of nucleic acid systems." Journal of computational chemistry, 32.1 (2011): 170-173.
Zuker, Michael. "Mfold web server for nucleic acid folding and hybridization prediction." Nucleic acids research, 31.13 (2003): 3406-3415.
Reuter, Jessica S., and David H. Mathews. "RNAstructure: software for RNA secondary structure prediction and analysis." BMC bioinformatics, 11.1 (2010): 129.
Xie, Kabin, and Yinong Yang. "RNA-guided genome editing in plants using a CRISPR–Cas system." Molecular plant, 6.6 (2013): 1975-1983.

@@ Line 66: / Line 66: @@
 								<a href="#IntroVaccine" data-scroll-to data-scroll-to-offset="50" class="list-group-item list-group-item-action d-flex justify-content-between">
 									<div>
-										<span>Introduction</span>
+										<span>Preface</span>
 									</div>
 									<div>
@@ Line 72: / Line 72: @@
 									</div>
 								</a>
-								<a href="#ImportanceVaccine" data-scroll-to data-scroll-to-offset="50" class="list-group-item list-group-item-action d-flex justify-content-between">
+								<<a href="#EncapsulinDelivery" data-scroll-to data-scroll-to-offset="50" class="list-group-item list-group-item-action d-flex justify-content-between">
 									<div>
-										<span>Rising Importance of Cancer Vaccination</span>
+										<span>Encapsulin Antigen Delivery</span>
 									</div>
 									<div>
@@ Line 111: / Line 111: @@
 						<h1 id="IntroVaccine">Introduction</h1>
-							<p class="lead">The aim of the vaccine part is ....</p>
+							<h3>How Neoantigen-based Cancer Immunotherapy Works</h3>
+							<p class="lead"><b>[FIGURE HERE]</b></p>
+							<p class="lead">A specific neoantigen that is differentially expressed on tumour cells, and not healthy cells is supplied to the patient through a vaccine formulation. Dendritic cells uptake the neoantigen from the vaccine formulation. Alongside the neoantigen, the vaccine formulation supplies an adjuvant that activates the dendritic cell to uptake foreign material, and perceive them as danger signals.</p>
+							<p class="lead">The dendritic cell then processes the neoantigen and cross-represents it on MHC1 complexes, where naïve CD8+ T cells can recognize it. Once the naïve CD8+ cells recognize the neoantigen, they mature into cytotoxic CD8+ T cells that specifically attack cells that express this neoantigen; in this case, the tumour cells.</p>
+							<br>
+							<h3>Rising Importance of Cancer Vaccination</h3>
+							<p class="lead">The immunogenicity of Neoantigens leading to T cell activation has long been demonstrated in patients (<a href="#Wolfel1995"><span style="color:blue">Wolfel <i>et al.</i>, 1995</span></a>). In fact, preclinical and clinical data has already shown that neoantigen specific cytotoxic T lymphocytes (CTLs) constitute the most potent T cell populations for tumour rejection (<a href="#Wolfel1995"><span style="color:blue">Wolfel <i>et al.</i>, 1995</span></a>; <a href="#Matsushita2012"><span style="color:blue">Matsushita <i>et al.</i>). Still, the natural production of neoantigen specific CTLs by a patient’s immune system is scarce because of low clonal frequency and ineffective presentation of neoantigens (<a href="#Alexandrov2013"><span style="color:blue">Alexandrov <i>et al.</i>, 2013</span></a>; <a href="#Zhu2017"><span style="color:blue">Zhu <i>et al.</i>, 2017</span></a>). Therefore, cancer vaccines or adjuvant cancer therapies (ACT) are crucial to potentiate immunity against neoantigens for cancer treatment. Accordingly, a large number of strategies have been progressed for the creation, formulation and delivery of various cancer vaccines; for example, whole tumor cell lysate, nucleotide (mRNA/ DNA), protein or peptides-based vaccines, dendritic cell (DC) based vaccines, viral vectors, biomaterial-assisted vaccines, and so on. However, it remains challenging to develop a universal and effective delivery strategy to target neoantigen-based vaccines to professional antigen-presenting cells (APCs) for eliciting robust and potent T cell responses against cancer.</p>
 						</div>
@@ Line 118: / Line 124: @@
 							<hr style="height:2px;border:none;color:#333;background-color:#333;" />
 								<br>
-								<h1 id="ImportanceVaccine">Rising Importance of Cancer Vaccination</h1>
+								<h1 id="EncapsulinDelivery">Encapsulin Antigen Delivery</h1>
-								<p class="lead">
+								<p class="lead"></p>
-									(<a href="#Wolfel1995"><span style="color:blue">Wolfel <i>et al.</i>, 1995</span></a>)
 									....
 									(<a href="#Matsushita2012"><span style="color:blue">Matsushita <i>et al.</i>, 2012</span></a>; <a href="#Tran2014"><span style="color:blue">Tran <i>et al.</i>, 2014</span></a>; <a href="#Tran2016"><span style="color:blue">Tran <i>et al.</i>, 2016</span></a>; <a href="#Tran2017"><span style="color:blue">Tran <i>et al.</i>, 2017</span></a>)
@@ Line 908: / Line 914: @@
 						<h1 id="Cas12aAssay">Our detection scheme</h1>
 							<p class="lead">We envision a  follow-up based on repeated liquid biopsies in order to track the sequences that have been identified using our bioinformatic software, amplified by either PCR, isothermal amplification or RCA, and finally detected directly in the plasma using our Cas12a based system.</p>
-							<p class="lead"><b>[FIGURE HERE]</b></p>
+							<center>
+							<figure>
+								<img alt="Image" src="https://static.igem.org/mediawiki/2018/6/64/T--EPFL--FromBloodTo.png" class="img-fluid rounded" width="800" >
+								<figcaption class="mt-3 text-muted">Representation of our detection scheme: from a single drop of blood we collect the plasma in which reside our biomarkers, ctDNA and miRNAs. Depending on the follow-up assay (vaccine monitoring or relapse detection), we will amplify specific target sequences that we will detect afterwards using our Cas12a assay.</figcaption>
+							</figure>
+							</center>
 							<br>
 							<p class="lead">In the following example, the patient receives our treatment based on a cocktail of neoantigens presented on the surface of the encapsulin. The target population decreases with time, which suggests a response to our immunotherapy-based vaccine for a certain period of time but, due to the emergence of resistance or the survival of another cell population, the patient relapses. Chromosomal rearrangements and miRNAs are then the object of our detection, which would suggest a potential relapse. It is then strongly recommended for the patient to carry out a clinical test (biopsy, imaging, endoscopy) for  confirmation.</p>
@@ Line 914: / Line 926: @@
 							<figure>
 								<img alt="Image" src="https://static.igem.org/mediawiki/2018/c/c8/T--EPFL--GraphDetection.png" class="img-fluid rounded" width="800" >
-								<figcaption class="mt-3 text-muted"><b>[CAPTION HERE]</b></figcaption>
+								<figcaption class="mt-3 text-muted">Example of the use of biomarkers as a means of prognosis on the health of a patient with melanoma. In this case, the patient receives our vaccine as a treatment, and we assume that the treatment worked. This would be marked by a decrease in the concentration of ctDNA characteristic of the neoantigens targeted by our vaccine, ideally until their complete eradication. The condition of the patient stabilizes for a certain amount of time but it still ends up in relapse, which is nonetheless promptly marked by an increase of chromosomal rearrangements ctDNA fragments in the blood.</figcaption>
 							</figure>
 							</center>

Difference between revisions of "Team:EPFL/Design"

Revision as of 18:32, 16 October 2018

Description

Design

Software

Results

Demonstration

Interlab

Parts

Improve

Measurement

Team Members

Collaborations

Integrated Human Practices

Ethics

Applied Design

Education and Public Engagement

European and Eurasian Meetup

Attributions

Sponsors

Partners

Awards

Design

Introduction

How Neoantigen-based Cancer Immunotherapy Works

Rising Importance of Cancer Vaccination

Encapsulin Antigen Delivery

Biomaterial Platform Assisted Delivery

Design Constraints for an efficient antigen delivery platform

Encapsulin

Encapsulin Nanocage protein profile

Encapsulin in Literature

Our Vaccine Design

Genetic Incorporation of Neoantigen

Cell free expression of Encapsulin

Heat Purification of Encapsulin

Library Expression Process

References

Introduction

Biomarkers and Liquid Biopsies

ctDNA - A look at the tumor DNA

Vaccine monitoring through point mutation

Cancer relapse detection through chromosomal rearrangement

Cancer relapse detection through miRNA

Cas12a

Design of the gRNA

Fluorescent readout

Sample preparation

Amplification

Our probes

SYBR Green I

Detailed design

Analysis of given probes

5'-AGTAGGTTGTATAGTTGGGCAACCTACTACCTCAGGGGGGGGCTATACAATGAGGT-3’

*Here and after, when referring to the "amplicon sequence", we only show one single copy of the reverse transcript of the probe. The actual amplicon, by definition of Rolling Circle Amplification, is of course made instead of sequential copies of this "unitary" sequence.

Comparison Cas9/Cas12a

Probes for Cas12a

5’-ATAGTTNNNNNNNNNNNNTTTNAACTATACAACCTACNNNTGAGGTAGTAGGTTGT-3’ [amplicon template]

5’-ATAGTTN'AAANNNNNNNNTTTNAACTATACAACCTACNNNTGAGGTAGTAGGTTGT-3’ (with N' being the base complementary to the N in the PAM)

5’-ATAGTTN'AAANNNNNNNNNNNNTTTNAACTATACAACCTACNNNTGAGGTAGTAGGTTGT-3’

5’-ATAGTTN'AAANNNNNNNNNNNNNNNNTTTNAACTATACAACCTACNNNTGAGGTAGTAGGTTGT-3’

Design of gRNAs after new theory

Our detection scheme

References