Latest revision as of 02:47, 18 October 2018

Ruby - Responsive Corporate Tempalte

Demonstration

Overview

In this project, in order to detect and monitor the lactic acid concentration during milk fermentation, we constructed two plasmids with GFP reporter gene in engineered bacteria to respond exogenous lactic acid.

To date, the lactic acid detected plasmids have been demonstrated with two critical achievements:

1. Under the induction of lactic acid, the reporter gene, GFP, with significantly upregulated expression level than the negative control group;

2. We successfully designed an optical fiber based model to detect and monitor the lactic acid induced GFP signals during the fermentation.

Principle

Nature offers a potential solution in the form of bacterial genetic operons, which are designed to sense the concentration of important metabolites in the environment and activate gene expression in response. The sensitivity of such systems is very high—often compounds are detected at micromolar or even nanomolar concentrations and a wealth of such systems that can detect important metabolites for mammalian cell culture such as sugars, amino acids, and metabolic waste products have been identified ^[1].

Schematic of the LldPRD operon and biochemical mechanism (Figure 1): In the absence of lactate, dimers of LldR bind to the operator sites in the lldPRD promoter and form a tetramer, sequestering the DNA and preventing transcription of the operon. Bottom: Lactate enters the cell via the glycolate permease (GlcA) or LldP and interacts with the LldR regulator protein. The LldR dimer bound to O2 dissociates when bound to lactate, but the dimer bound to O1 becomes a transcriptional activator that promotes transcription of the operon when lactate binds[1].

In quorum sensing (QS) process, bacteria regulate gene expression by utilizing small signaling molecules called autoinducers in response to a variety of environmental cues. Autoinducer 2 (AI-2), a QS signaling molecule proposed to be involved in interspecies communication, is produced by many species of gram-negative and gram-positive bacteria. In Escherichia coli and Salmonella typhimurium, the extracellular AI-2 is imported into the cell by a transporter encoded by the Lsr operon. In every case, AI-2 is synthesized by LuxS, which functions in the pathway for metabolism of S-adenosylmethionine (SAM), a major cellular methyl donor. In a metabolic pathway known as the activated methyl cycle, SAM is metabolized to Sadenosylhomocysteine, which is subsequently converted to adenine, homocysteine, and 4,5-dihydroxy-2,3-pentanedione (DPD, the precursor of AI-2) by the sequential action of the enzymes Pfs and LuxS. DPD is a highly reactive product that can rearrange and undergo additional reactions, suggesting that distinct but related molecules derived from DPD may be the signals that different bacterial species recognize as AI-2. The regulatory network for AI-2 uptake is comprised of two other important components, lsrR and lsrK, both of which are located adjacent, but divergently transcribed from the lsr operon (Figure 2). LsrR is the repressor of the lsr operon and itself. LsrK is a kinase responsible for converting AI-2 to phospho-AI-2, which is required for relieving LsrR repression ^[2].

Figure 1. (a) Organization of the lldPRD operon. O1 and O2 represent the operator sites in the lldPRDp promoter. The three genes in the operon are (from left to right) LldP: lactate permease to allow lactate transport, LldR: regulatory protein, LldD: Lactate dehydrogenase for lactate utilization. (b) Diagram of the mechanism of lactate-dependent induction of lldPRD operon in E.coli cells.

Figure 2. (Left) Model for regulation, transportation, and modification of AI-2 by the Lsr proteins in E. coli. AI-2 is synthesized by LuxS and accumulates extracellularly. The AI-2 uptake repressor LsrR represses the lsr operon (comprised of lsrACDBFG) and the lsrRK. Basal expression of the LsrACDB transporter allows some AI-2 to enter the cytoplasm, where it is phosphorylated by LsrK. Phospho-AI-2 has been reported to bind to LsrR and relieve its repression effect on the lsr transporter genes, thus stimulating additional AI-2 uptake. Figure 3. (Right) Illustration of project principle.

Therefore, we hope to combine QS system and lldPRD operon for constructing two-expression plasmids (Figure 3).

Engineered Bacteria Composition

According to the modeling results, we finally decided to choose following engineered E.coli as our biosense detector.

lldPRD operon promoter-Luxs-Lldr × LsrA promoter-GFP

Outcomes

1. After constructing two plasmids pCDFDuet-1 and pET-28a(+) contained lldPRD operon promoter-Luxs-Lldr and LsrA promoter-GFP, respectively, we transformed them into one K12 competent cell (Figure 4). For transformants selection, pCDFDuet-1 and pET-28a(+) contained streptomycin and kanamycin, respectively. As described previously, the lldPRD operon should be activated under the lactate induction. Thus, we used Western Blot for detecting the expression of LuxS and lldR proteins from lldPRD operon (Figure 5).

Figure 4. K12 E.coli can grow on two-resistant-media containing both Kanamycin and streptomycin.

Figure 5. Western Blot result. (a) Characterization of LuxS under different concentrations of lactic acid and IPTG. The LuxS protein had been an obvious protein band between the last two marker bands of 15 kDa and 25 kDa. The molecular weight of the LuxS protein is about 17 kDa. Lane 1: IPTG 0 mM, lactic acid 0 mM; Lane 2: IPTG 0.5 mM, lactic acid 0 mM; Lane 3: IPTG 1 mM, lactic acid 0 mM; Lane 4: IPTG 0 mM, lactic acid 2 mM; Lane 5: IPTG 0.5 mM, lactic acid 2 mM; Lane 6: IPTG 1 mM, lactic acid 2 mM; Lane 7: control( IPTG 0 mM, lactic acid 0 mM); Lane 8: IPTG 0 mM, lactic acid 0 mM; Lane 9: IPTG 0.5 mM, lactic acid 0 mM; Lane 10: IPTG 1 mM, lactic acid 0 mM; Lane 11: IPTG 0 mM, lactic acid 2mM; Lane 12: IPTG 0.5 mM, lactic acid 2 mM; Lane 13: IPTG 1 mM, lactic acid 2 mM. (b) Characterization of Lldr under different concentrations of lactic acid and IPTG. The lldR protein had been an obvious protein band between two marker bands of 25 kDa and 35 kDa. The molecular weight of the lldR protein is about 29 kDa. Lane 1: IPTG 0mM, lactic acid 0mM; Lane 2: IPTG 0.5mM, lactic acid 0mM; Lane 3, IPTG 1mM, lactic acid 0mM; Lane 4: IPTG 0mM, lactic acid 2mM; Lane 5: IPTG 0.5mM, lactic acid 2mM; Lane 6, IPTG 1mM, lactic acid 2mM. Note: we have used two kind of plasmids: (1) pCDFDuet-1, its resistance is streptomycin; (2) pET-28b(+), its resistance is Kanamycin.

2. Then, we used optical fibers to detect the green fluorescent signal from GFP expression and the fluorescence intensity was quantified spectrophotometer (Figure 7.).

Figure 6. Equipment of optical fibers.

Figure 7. Fluorescence Intensity results from spectrophotometer. Note: EG refers to Experimental Group; CG refers to Control Group; [Lactate] refers to applied lactate concentration, mM.

3. From above data, we calculated their net value as well as got fitting figures and functions (Figure 8). Along with series lactate concentration variety, all net value is above 0. This result indicated that this engineered K12 E.coli can emit distinct GFP fluorescence intensities under different lactate concentrations. Except for the initiation of the reaction, the rest of the functional curves showed similar trends, especially when the reaction time was 5 min and 10 min, and the peak value was reached before the concentration of lactate concentration is 1 mM. From Figure 8, we could conclude the engineered bacteria was best used to detect the lactic acid concentration in yogurt at the reaction time of 5 min and 10 min due to the relative high sensitivity. In order to reduce the reaction time of engineered bacteria, the reaction time of 5 min was selected.

Figure 8. Fitting Results.

4. The diagram indicated that the system for monitoring and quantifying lactic acid in fermentation via using our engineered GFP bacteria (Figure 9).

Figure 9. Design of lactate biosensor device. The container is made by 3D printing (details).
Reference
1. Goers, L., et al., Whole-cell Escherichia coli lactate biosensor for monitoring mammalian cell cultures during biopharmaceutical production. Biotechnol Bioeng, 2017. 114(6): p. 1290-1300.
2. Xue, T., et al., LsrR-binding site recognition and regulatory characteristics in Escherichia coli AI-2 quorum sensing. Cell Res, 2009. 19(11): p. 1258-68.

@@ Line 2: / Line 2: @@
 <html>
 <div class="center-block" style="max-width:800px;">
-		<h1>
-				Demonstration
+					<h1>Demonstration</h1>
-			</h1>
+				<h2>Overview</h2>
-			<h2>
+				<div class="p">
-				Overview
+					In this project, in order to detect and monitor the lactic acid concentration during milk fermentation, we constructed two plasmids with GFP reporter gene in engineered bacteria to respond exogenous lactic acid.
-			</h2>
+				</div>
-			<p>
+				<div class="p">
-				In the initial phase of the project, we planned to complete the whole project with the coliform effect and the lactic acid operator. We plan to construct two plasmids to complete the whole project and realize the whole process from detect lactic acid to express Green Fluorescence Protein. After a long effort, we have completed the entire process under formal conditions. The main achievements are stated as follows:
+					To date, the lactic acid detected plasmids have been demonstrated with two critical achievements:
-			</p>
+				</div>
-			<p>
+				<div class="p">
-					<br>1.	With the induction of lactic acid, our GFP could emit green fluorescence, and the fluorescence value was significantly higher than that of the control group.
+.	Under the induction of lactic acid, the reporter gene, GFP, with significantly upregulated expression level than the negative control group;
-					<br>2.	Isolated proteins also have good western bloting results.
+				</div>
-					<br>3.	We have constructed a device to detect lactic acid by using optical fiber, which is convenient and simple and fast fluorescence value of GFP, so as to determine the concentration of lactic acid.
+				<div class="p">
-			</p>
+.	We successfully designed an optical fiber based model to detect and monitor the lactic acid induced GFP signals during the fermentation.
-			<h2>
+				</div>
-				Principle
-			</h2>
+				<h2>
-			<p>
+					Principle
-				Nature offers a potential solution in the form of bacterial genetic operons, which are designed to sense the concentration of important metabolites in the environment and activate gene expression in response. The sensitivity of such systems is very high—often compounds are detected at micromolar or even nanomolar concentrations and a wealth of such systems that can detect important metabolites for mammalian cell culture such as sugars, amino acids, and metabolic waste products have been identified [1].
+				</h2>
-			</p>
+				<div class="p">
-			<p>
+					Nature offers a potential solution in the form of bacterial genetic operons, which are designed to sense the concentration of important metabolites in the environment and activate gene expression in response. The sensitivity of such systems is very high—often compounds are detected at micromolar or even nanomolar concentrations and a wealth of such systems that can detect important metabolites for mammalian cell culture such as sugars, amino acids, and metabolic waste products have been identified <sup>[1]</sup>.
-				Schematic of the LldPRD operon and biochemical mechanism (Figure 1): In the absence of lactate, dimers of LldR bind to the operator sites in the lldPRD promoter and form a tetramer, sequestering the DNA and preventing transcription of the operon. Bottom: Lactate enters the cell via the glycolate permease (GlcA) or LldP and interacts with the LldR regulator protein. The LldR dimer bound to O2 dissociates when bound to lactate, but the dimer bound to O1 becomes a transcriptional activator that promotes transcription of the operon when lactate binds [1].
+				</div>
-			</p>
+				<div class="p">
-			<p>
+					Schematic of the LldPRD operon and biochemical mechanism (Figure 1): In the absence of lactate, dimers of LldR bind to the operator sites in the lldPRD promoter and form a tetramer, sequestering the DNA and preventing transcription of the operon. Bottom: Lactate enters the cell via the glycolate permease (GlcA) or LldP and interacts with the LldR regulator protein. The LldR dimer bound to O2 dissociates when bound to lactate, but the dimer bound to O1 becomes a transcriptional activator that promotes transcription of the operon when lactate binds[1].
-				In quorum sensing (QS) process, bacteria regulate gene expression by utilizing small signaling molecules called autoinducers in response to a variety of environmental cues. Autoinducer 2 (AI-2), a QS signaling molecule proposed to be involved in interspecies communication, is produced by many species of gram-negative and gram-positive bacteria. In Escherichia coli and Salmonella typhimurium, the extracellular AI-2 is imported into the cell by a transporter encoded by the Lsr operon. In every case, AI-2 is synthesized by LuxS, which functions in the pathway for metabolism of S-adenosylmethionine (SAM), a major cellular methyl donor. In a metabolic pathway known as the activated methyl cycle, SAM is metabolized to Sadenosylhomocysteine, which is subsequently converted to adenine, homocysteine, and 4,5-dihydroxy-2,3-pentanedione (DPD, the precursor of AI-2) by the sequential action of the enzymes Pfs and LuxS. DPD is a highly reactive product that can rearrange and undergo additional reactions, suggesting that distinct but related molecules derived from DPD may be the signals that different bacterial species recognize as AI-2. The regulatory network for AI-2 uptake is comprised of two other important components, lsrR and lsrK, both of which are located adjacent, but divergently transcribed from the lsr operon (Figure 2). LsrR is the repressor of the lsr operon and itself. LsrK is a kinase responsible for converting AI-2 to phospho-AI-2, which is required for relieving LsrR repression [2].
+				</div>
-			</p>
+				<div class="p">
+					In quorum sensing (QS) process, bacteria regulate gene expression by utilizing small signaling molecules called autoinducers in response to a variety of environmental cues. Autoinducer 2 (AI-2), a QS signaling molecule proposed to be involved in interspecies communication, is produced by many species of gram-negative and gram-positive bacteria. In <i>Escherichia coli</i> and <i>Salmonella typhimurium</i>, the extracellular AI-2 is imported into the cell by a transporter encoded by the Lsr operon. In every case, AI-2 is synthesized by LuxS, which functions in the pathway for metabolism of S-adenosylmethionine (SAM), a major cellular methyl donor. In a metabolic pathway known as the activated methyl cycle, SAM is metabolized to Sadenosylhomocysteine, which is subsequently converted to adenine, homocysteine, and 4,5-dihydroxy-2,3-pentanedione (DPD, the precursor of AI-2) by the sequential action of the enzymes Pfs and LuxS. DPD is a highly reactive product that can rearrange and undergo additional reactions, suggesting that distinct but related molecules derived from DPD may be the signals that different bacterial species recognize as AI-2. The regulatory network for AI-2 uptake is comprised of two other important components, lsrR and lsrK, both of which are located adjacent, but divergently transcribed from the lsr operon (Figure 2). LsrR is the repressor of the lsr operon and itself. LsrK is a kinase responsible for converting AI-2 to phospho-AI-2, which is required for relieving LsrR repression <sup>[2]</sup>.
-			<img src="https://static.igem.org/mediawiki/2018/e/ea/T--NEU_China_B--d0.png" class="img-responsive" alt="Image">
+				</div>
+				<img src="https://static.igem.org/mediawiki/2018/thumb/8/89/T--NEU_China_B--dmn0.png/800px-T--NEU_China_B--dmn0.png.jpeg" alt="">
-			<div class="row">
+				Figure 1. (a) Organization of the lldPRD operon. O1 and O2 represent the operator sites in the lldPRDp promoter. The three genes in the operon are (from left to right) LldP: lactate permease to allow lactate transport, LldR: regulatory protein, LldD: Lactate dehydrogenase for lactate utilization. (b) Diagram of the mechanism of lactate-dependent induction of lldPRD operon in E.<i>coli</i> cells.
+				<img src="https://static.igem.org/mediawiki/2018/thumb/f/f5/T--NEU_China_B--dmn1.png/800px-T--NEU_China_B--dmn1.png.jpeg" alt="">
-					<img src="https://static.igem.org/mediawiki/2018/1/14/T--NEU_China_B--d1.png" alt="Image" width="400px">
+				Figure 2. (Left) Model for regulation, transportation, and modification of AI-2 by the Lsr proteins in E. <i>coli</i>. AI-2 is synthesized by LuxS and accumulates extracellularly. The AI-2 uptake repressor LsrR represses the lsr operon (comprised of lsrACDBFG) and the lsrRK. Basal expression of the LsrACDB transporter allows some AI-2 to enter the cytoplasm, where it is phosphorylated by LsrK. Phospho-AI-2 has been reported to bind to LsrR and relieve its repression effect on the lsr transporter genes, thus stimulating additional AI-2 uptake.
-					<style>
-						.ans{
-							display: inline-block;
-							margin-top: -40px;
-						};
-					</style>
-					<img src="https://static.igem.org/mediawiki/2018/1/1f/T--NEU_China_B--d2.png" alt="Image" class="ans" width="450px" >
-			</div>
-			<p>
-				Figure 1. (a) Organization of the lldPRD operon. O1 and O2 represent the operator sites in the lldPRDp promoter. The three genes in the operon are (from left to right) LldP: lactate permease to allow lactate transport, LldR: regulatory protein, LldD: Lactate dehydrogenase for lactate utilization. (b) Diagram of the mechanism of lactate-dependent induction of lldPRD operon in E.coli cells.
-			</p>
-			<div class="row">
-				<img src="https://static.igem.org/mediawiki/2018/4/4e/T--NEU_China_B--d3.png" width="400px" alt="Image">
-				<img src="https://static.igem.org/mediawiki/2018/thumb/0/07/T--NEU_China_B--d4.png/760px-T--NEU_China_B--d4.png.jpeg" width="300px" alt="">
-			</div>
-			<p>
-				Figure 2. (Left) Model for regulation, transportation, and modification of AI-2 by the Lsr proteins in E. coli. AI-2 is synthesized by LuxS and accumulates extracellularly. The AI-2 uptake repressor LsrR represses the lsr operon (comprised of lsrACDBFG) and the lsrRK. Basal expression of the LsrACDB transporter allows some AI-2 to enter the cytoplasm, where it is phosphorylated by LsrK. Phospho-AI-2 has been reported to bind to LsrR and relieve its repression effect on the lsr transporter genes, thus stimulating additional AI-2 uptake.
 				Figure 3. (Right) Illustration of project principle.
-			</p>
+				<div class="p">
+					Therefore, we hope to combine QS system and lldPRD operon for constructing two-expression plasmids (Figure 3).
-			<p>
+				</div>
-				Therefore, we hope to combine QS system and lldPRD operon for constructing two-expression plasmids (Figure 3).
+				<h2>
-			</p>
+					Engineered Bacteria Composition
-			<p>
+				</h2>
-				Engineered Bacteria Composition
+				<div class="p">
-			</p>
+					According to the modeling results, we finally decided to choose following engineered E.<i>coli</i> as our biosense detector.
+				</div>
-			<p>
+				<h2>
-				According to the modeling results, we finally decided to choose following engineered E.coli as out biosensor detector.
+					lldPRD operon promoter-Luxs-Lldr × LsrA promoter-GFP
-			</p>
+				</h2>
-			<p>
+				<img src="https://static.igem.org/mediawiki/2018/thumb/f/f2/T--NEU_China_B--dmn2.png/800px-T--NEU_China_B--dmn2.png" alt="">
-				lldPRD operon promoter-Luxs-Lldr × LsrA promoter-GFP
+				<h3>
-			</p>
+					Outcomes
-			<img src="https://static.igem.org/mediawiki/2018/8/8b/T--NEU_China_B--d5.png" width="300px" alt="Image">
+				</h3>
-			x
+				<div class="p">
-			<img src="https://static.igem.org/mediawiki/2018/2/24/T--NEU_China_B--d6.png" width="200px" height="25px" alt="Image">
+.	After constructing two plasmids pCDFDuet-1 and pET-28a(+) contained lldPRD operon promoter-Luxs-Lldr and LsrA promoter-GFP, respectively, we transformed them into one K12 competent cell (Figure 4). For transformants selection, pCDFDuet-1 and pET-28a(+) contained <i>streptomycin</i> and <i>kanamycin</i>, respectively. As described previously, the lldPRD operon should be activated under the lactate induction. Thus, we used Western Blot for detecting the expression of LuxS and lldR proteins from lldPRD operon (Figure 5).
-			<h2>
+				</div>
-				Outcomes
+				<img src="https://static.igem.org/mediawiki/2018/thumb/0/06/T--NEU_China_B--d7.png/800px-T--NEU_China_B--d7.png.jpeg" alt="">
-			</h2>
+				Figure 4. K12 E.<i>coli</i> can grow on two-resistant-media containing both <i>Kanamycin</i> and <i>streptomycin</i>.
-			<p>
+				<img src="https://static.igem.org/mediawiki/2018/thumb/b/b9/T--NEU_China_B--dmn4.png/800px-T--NEU_China_B--dmn4.png.jpeg" alt="">
-.	After constructing two plasmids containing lldPRD operon promoter-Luxs-Lldr and LsrA promoter-GFP, respectively, we transformed them into one K12 (Figure 4). Then we using Western Blotting method for expressing LuxS and lldR separately (Figure 5).
+				Figure 5. Western Blot result. (a) Characterization of LuxS under different concentrations of lactic acid and IPTG. The LuxS protein had been an obvious protein band between the last two marker bands of 15 kDa and 25 kDa. The molecular weight of the LuxS protein is about 17 kDa. Lane 1: IPTG 0 mM, lactic acid 0 mM; Lane 2: IPTG 0.5 mM, lactic acid 0 mM; Lane 3: IPTG 1 mM, lactic acid 0 mM; Lane 4: IPTG 0 mM, lactic acid 2 mM; Lane 5: IPTG 0.5 mM, lactic acid 2 mM; Lane 6: IPTG 1 mM, lactic acid 2 mM; Lane 7: control( IPTG 0 mM, lactic acid 0 mM); Lane 8: IPTG 0 mM, lactic acid 0 mM; Lane 9: IPTG 0.5 mM, lactic acid 0 mM; Lane 10: IPTG 1 mM, lactic acid 0 mM; Lane 11: IPTG 0 mM, lactic acid 2mM; Lane 12: IPTG 0.5 mM, lactic acid 2 mM; Lane 13: IPTG 1 mM, lactic acid 2 mM. (b) Characterization of Lldr under different concentrations of lactic acid and IPTG. The lldR protein had been an obvious protein band between two marker bands of 25 kDa and 35 kDa. The molecular weight of the lldR protein is about 29 kDa. Lane 1: IPTG 0mM, lactic acid 0mM; Lane 2: IPTG 0.5mM, lactic acid 0mM; Lane 3, IPTG 1mM, lactic acid 0mM; Lane 4: IPTG 0mM, lactic acid 2mM; Lane 5: IPTG 0.5mM, lactic acid 2mM; Lane 6, IPTG 1mM, lactic acid 2mM.
-			</p>
-			<img src="https://static.igem.org/mediawiki/2018/thumb/0/06/T--NEU_China_B--d7.png/800px-T--NEU_China_B--d7.png.jpeg" class="img-responsive" alt="Image">
-			<p>
-				Figure 4. K12 E.coli can grow on two-resistant-media containing both Kanamycin and streptomycin.
-			</p>
-			(a)	                                      (b)
-			Luxs                                            lldr
-			<img src="https://static.igem.org/mediawiki/2018/thumb/5/52/T--NEU_China_B--d8.png/800px-T--NEU_China_B--d8.png.jpeg" class="img-responsive" alt="Image">
-			<p>
-				Figure 5. Western Blotting results
-			</p>
-			<p>
 				Note: we have used two kind of plasmids: (1) pCDFDuet-1, its resistance is streptomycin; (2) pET-28b(+), its resistance is Kanamycin.
-			</p>
+				<div class="p">
-			<p>
+.	Then, we used optical fibers to detect the green fluorescent signal from GFP expression and the fluorescence intensity was quantified spectrophotometer (Figure 7.).
-.	We took advantage of optical fibers (Figure 6) for detecting fluorescence intensity along with a series lactate concentration variety as well as time, resulting in the following data (Figure 7).
+				</div>
-			</p>
+				<img src="https://static.igem.org/mediawiki/2018/thumb/5/52/T--NEU_China_B--d8.png/800px-T--NEU_China_B--d8.png.jpeg" alt="">
-			<img src="https://static.igem.org/mediawiki/2018/thumb/3/35/T--NEU_China_B--d9.png/800px-T--NEU_China_B--d9.png.jpeg" class="img-responsive" alt="Image">
-			<p>
 				Figure 6. Equipment of optical fibers.
-			</p>
+				<img src="https://static.igem.org/mediawiki/2018/thumb/0/01/T--NEU_China_B--dmn6.png/800px-T--NEU_China_B--dmn6.png.jpeg" alt="">
-			<p>
+				Figure 7. Fluorescence Intensity results from spectrophotometer.
-				<img src="https://static.igem.org/mediawiki/2018/thumb/3/3a/T--NEU_China_B--dtb.png/482px-T--NEU_China_B--dtb.png.jpeg" alt="">
-			</p>
-			<p>
-				Figure 7. Fluorescence Intensity results.
-			</p>
-			<p>
 				Note: EG refers to Experimental Group; CG refers to Control Group; [Lactate] refers to applied lactate concentration, mM.
-			</p>
+				<div class="p">
-			<p>
+.	From above data, we calculated their net value as well as got fitting figures and functions (Figure 8). Along with series lactate concentration variety, all net value is above 0. This result indicated  that this engineered K12 E.<i>coli</i> can emit distinct GFP fluorescence intensities under different lactate concentrations. Except for the initiation of the reaction, the rest of the functional curves showed similar trends, especially when the reaction time was 5 min and 10 min, and the peak value was reached before the concentration of lactate concentration is 1 mM. From Figure 8, we could conclude  the engineered bacteria was best used to detect the lactic acid concentration in yogurt at the reaction time of 5 min and 10 min due to the relative high sensitivity. In order to reduce the reaction time of engineered bacteria, the reaction time of 5 min was selected.
-.	By using above data, we calculated their net value as well as got fitting figures and functions (Figure 8). Along with series lactate concentration variety, all net value is over 0, meaning that this engineered E.coli can detect the lactate concentration as well as change fluorescence intensity. Except for the beginning of the reaction, the rest of the functional curves showed similar trends, especially when the reaction time was 5 min and 10 min, and the peak value was reached before the concentration of lactate concentration is 1 mM. It proved that the engineering bacteria was best used to detect the lactic acid concentration in yogurt at the reaction time of 5 min and 10 min with a high sensitivity. In order to reduce the reaction time of engineered bacteria, the reaction time of 5 min was selected. Based that total time of reaction time of optical fibers is 200 ms, therefore our reaction time can be defined as 5 min.
+				</div>
-				</p>
+				<img src="https://static.igem.org/mediawiki/2018/thumb/3/34/T--NEU_China_B--dmn7.png/800px-T--NEU_China_B--dmn7.png.jpeg" alt="">
+				Figure 8. Fitting Results.
-			<p>
-				Figure 8. Fitting results and functions.
+				<div class="p">
-			</p>
+.	The diagram indicated that the system for monitoring and quantifying lactic acid in fermentation via using our engineered GFP bacteria (Figure 9).
+				</div>
-			<p>
+				<img src="https://static.igem.org/mediawiki/2018/thumb/1/13/T--NEU_China_B--dmn8.png/800px-T--NEU_China_B--dmn8.png.jpeg" alt="">
-.	Since we have little time for building complete device, we only drawled the design of following (Figure 9.).
+				Figure 9. Design of lactate biosensor device. The container is made by 3D printing (details).
-				<br>Figure 9. Design of lactate biosensor device. The container is made by 3D printing (details).
-			</p>
+					<br>Reference
-			<img src="https://static.igem.org/mediawiki/2018/thumb/e/e2/T--NEU_China_B--d10.png/800px-T--NEU_China_B--d10.png.jpeg" class="img-responsive" alt="Image">
+                                <i>
-			<i>
+					<br>1.	Goers, L., et al., Whole-cell Escherichia coli lactate biosensor for monitoring mammalian cell cultures during biopharmaceutical production. Biotechnol Bioeng, 2017. 114(6): p. 1290-1300.
-					Reference
+					<br>2.	Xue, T., et al., LsrR-binding site recognition and regulatory characteristics in Escherichia coli AI-2 quorum sensing. Cell Res, 2009. 19(11): p. 1258-68.
-					<br>
+				</i>
-					[1]: Lisa, Goers, Catherine, Ainsworth, Cher, Hui, Goey, Cleo, Kontoravdi, Paul, S, Freemont, Karen, M, Polizzi. Whole-Cell Escherichia coli Lactate Biosensor for Monitoring Mammalian Cell Cultures During Biopharmaceutical Production[J]. Biotechnology and Bioengineering, 2017, 114(6): 1290-1300.
-					<br>
-					[2]: Ting Xue, Liping Zhao, Haipeng Sun, Xianxuan Zhou, Baolin Sun. LsrR-binding site recognition and regulatory characteristics in Escherichia coli AI-2 quorum sensing [J]. Cell Research, 2009: 1258-1268.
-			</i>