Difference between revisions of "Team:Munich/Results"

Latest revision as of 09:57, 20 November 2018

Phactory

Results

Phages are bacteria specific organisms, not harmful to humans and more specific than antibiotics. With Phactory it is possible to produce therapeutically relevant phages independent of the corresponding pathogen. This was done in our optimized home-made cell extract. With Phactory, we achieved a stable manufacturing process which produces phages with the titer and purity required for patient treatment.

Optimizing a Cell-Free Expression System

The first part of our project is the optimization of a cell-free expression system as a manufacturing platform for bacteriophages. For our purpose, it is necessary to produce a high-quality cell extract, in a reproducible and easy manner. We focused on achieving the following goals for our cell extract:

increasing the protein content
finding reproducible methods of quality control
producing cell-extract that allows phage assembly

Considering a possible commercial application of our product we decided to furthermore evaluate the potential for scaling up of our preparation protocol.
We chose to try several different approaches to achieve these goals:

testing cell cultivation in a bioreactor to enable upscaling
finding optimal lysis conditions that produce high-quality extract
scaling up of cell lysis

We found that:

bioreactor cultivation allows for upscaling of cell extract production
sonication and lysozyme improve the performance of cell extract
cultivation and extract preparation barely impact cell extract composition
lyophilization is a good choice for cell-extract storage

Bioreactor Cultivation Allows For Upscaling Of Cell Extract Production

Cultivating bacteria is the first step in cell extract preparation. The cell extract preparation protocol of Sun et al.¹ uses shaking flask cultivation for biomass production. It recommends cell harvest in the mid-log growth phase at OD 1.8-2.0 to produce high-quality cell extract. We recorded growth curves for shaking flask cultivation and bioreactor cultivation in a lab-scale bioreactor, to compare biomass production under different culture conditions.

A generic square placeholder image with rounded corners in a figure. — Growth curves for cell cultivation in a shaking flask and a 2 L bioreactor. Growth curves were approximated by fitting a logistic function (line).

The growth curve from shaking flask cultivation revealed that the mid-log growth phase correlates to an OD of around 2. In bioreactor cultivation the mid-log growth phase is prolonged, due to the better aeration of the medium, and corresponds to an OD between 4 and 6. We harvested cells at OD 4, 5 and 6 to test which harvest point is most suitable to produce high quality cell extract.

The test revealed that the protein content is higher when cells were harvested at a higher OD, with OD 5 yielding the highest protein content. In addition, the cell extract from OD 5 produces the highest fluorescence intensity in the TXTL test. Compared to a cell extract from shaking flask cultivation the signal is reduced to about 60 %. The most likely cause for this result is that a higher fraction of proteins in the OD 5 cell extract is inactive, possibly due to protein damage during cell lysis (at the time of this experiment, cell lysis was not yet fully optimized).

The comparison of cultivation methods revealed that cultivation in a bioreactor is an applicable alternative to shaking flask cultivation and offers great potential for upscaling of cell extract preparation. In our 2 L lab-scale bioreactor we were able to produce 20 g of cell pellet, compared to 4-5 g that 2 L of shaking flask cultivation yield.

Sonication and Lysozyme Improve the Performance of Cell-Extract

Sonication

We tested three different cell lysis methods: beat beating, French press and sonication. Beat beating is an inexpensive and widely employed method but upscaling is problematic, and the preparation is tedious and time-consuming. High-pressure cell disruption in a so called ‘French-press’ is also used but these devices are very expensive and not widely prevalent. This contradicts our effort to provide a generally-applicable protocol for preparation of home-made cell extract. A sonication device on the other hand is available in most biochemical labs as it is a commonly used method for cell lysis in protein purification protocols. Nevertheless, we started by comparing all three lysis methods with settings commonly applied for cell lysis.

Our initial test showed that cell lysis by sonication yields extract with up to 2.8- and 4.4 fold higher expression than cell lysis by bead beating and French press respectively. These findings combined with the limited options of optimization for both bead beating and French press lysis as well as restricted potential for scaling up of bead beating, lead to the decision to focus our optimization efforts on sonication as lysis method.

Cell lysis by sonication has two main parameters that can be varied: the amplitude, which correlates to the power emitted by the sonication device and cycle number, representing the total time of sonication. Based on Yong-Chan Kwon & Michael C. Jewett² we decided to use 10 s pulses with 15 s pause between pulses to prevent excessive heating of the sample.

Screening of different amplitudes and cycle numbers for sonication.

Our screening revealed that increase in amplitude as well as increase in cycle number leads to higher protein content. The TXTL test showed high fluorescence intensity only for settings with low cycle numbers. This indicates that prolonged sonication damages the cellular machinery, reducing its ability for protein expression.

The highest-performing extracts were those obtained by sonication with 4 cycles at 33 % amplitude and 5 cycles at 10 % amplitude. Therefore, we focused our next steps on further optimization of those settings.

Lysozyme

In the last step we made an effort to scale up the sonication step. Preliminary experiments (results not shown) indicated 4 mL as the maximal sample volume that could be lysed efficiently with the device we had at our disposal. As indicated in the publication by Yong-Chan Kwon & Michael C. Jewett the number of sonication cycles was increased in proportion to the increase of sample volume. The presented results shown in the figure below show that this approach was successful: Using higher sample volumes for sonication increased protein content and expression quality of the cell extract. This proves that upscaling of cell extract preparation with cell lysis by sonication is indeed feasible.

Comparison of cell lysis conditions: increase of sample volume and use of lysozyme.

Even though previous attempts by Shresta et al.³ to use Lysozyme in cell extract preparation have been unsuccessful, we tested the effect of adding the cell-wall degrading enzyme at 1 mM concentration to the cell lysis reaction. Across all our experiments, lysozyme increased the efficiency of cell lysis for all tested settings. Moreover, the expression quality was likewise increased after Lysozyme addition, indicating that the remaining enzyme does not interfere with protein biosynthesis.

Cell Extract Processing

Cultivation and cell lysis are the apparent most crucial steps in preparation of cell extract but there are other steps that can have a great impact on cell extract quality. Some of our findings regarding those steps are:

Freezing cell pellets overnight for next-day processing does not interfere with extract quality but confers a major simplification of cell extract preparation
Preliminary results indicate that omitting the run-off reaction after lysis does not significantly impair extract quality
Dialysis of cell extract can be substituted by diafiltration in centrifugal filters without reducing the expression yield of the resulting extract

Characterizing Cell Extract Quality

In order to validate the success of our optimization efforts, adequate characterization of cell extract is indispensable. Here we will give a short review about the tools for quality assessment we implemented. Further details about characterization of these tools are available on the Measurement page.

We had initially defined increase of protein content in cell extract as optimization goal. However, as we realized early on, protein content alone is not a good measure for extract quality, because it provides no information about the activity of the cellular machinery.

To assess functionality of cell extract, testing of protein expression is necessary, which can be achieved by expressing fluorescent proteins and measuring the fluorescence time trace in a plate reader. To find the optimal quality control we compared the performance of different fluorescent proteins in cell extract.

We chose expression of mTurquoise – a variant of Cyan Fluorescent Protein (CFP) – as our favorite quality control for cell extract, as it results in high fluorescence intensity in a reproducible manner.

In addition, to examining protein expression we decided to analyze transcription uncoupled from translation by transcribing an RNA aptamer that binds a fluorescent dye.

We compared the fluorescence time trace of a Malachite Green binding aptamer in different cell extract samples. The fluorescence time traces decline after 30-50min, indicating that RNA degradation starts to prevail over transcription. Differences in the observed kinetics can be explained by variations in cell extract composition.

Cultivation and Extract Preparation Barely Impacts Cell Extract Composition

The main question was if the different performance of the cell extracts (P15, E10, myTXTL), especially concerning phage titers, is due to a divergent composition or caused by a discrepancy in activity of the relevant proteins e.g. transcription and translation related proteins Therefore, one student was sent to Bavarian Biomolecular Mass Spectrometry Centre (BayBioMS), where he analyzed the samples under the supervision of Dr. Christina Ludwig.

The results of the Mass Spectrometry gave us insight into the composition of the different TXTLs. We were able to identify 1771 proteins in all the extracts. The results indicate a high homogeneity between all three TXTLs, as illustrated in the heatmap. Based on the LFQ values (Label Free Quantification) a volcano plot of two samples (Arbor/E10, Arbor/P15 and E10/P15) was generated. In general, there is no protein more frequent in Arbor TXTL in comparison to E10 and P15. In contrast, some translation related proteins were slightly more abundant in E10 and P15 like certain tRNA ligases (PheS and PheT). The RecBCD subunits (the dsDNA degrading complex) is of similar abundance in all TXTLs, showing the importance to consider its negative impact on the assembly. The results were further validated with DAVID, a tool for finding metabolic pathways based on proteomic data. The identified pathways indicate no correlation with transcription/translation related pathways (data not shown).

We concluded that the performance difference is most likely due to decreased activity during TXTL preparation rather than a change in composition.

Volcano plots of myTXTL vs. P15 (A), myTXTL vs. E10 (B) and E10 vs. P15 (C), LC-MS/MS measurements of the E. coli proteome lysates were performed in duplicates on a Q-Exactive HFX instrument in data-dependent acquisition mode (Top18 method). Total protein injection amount was 0.5 µg. Gradient length was 1h. The data was then analyzed using MaxQuant and the Uniprot E. coli K12 FASTA file. The LFQ data was filtered for proteins that occur in both duplicates of at least one cell lysate group (Arbor E10 P14).

Lyophilization Is a Good Choice for Cell-Extract Storage

With regard to global application of Phactory it is crucial to enable long-term storage and shipping of our cell extract. In order to fulfill these requirements, we chose to freeze-dry our cell extract. Lyophilized extract can be stored at ambient temperature and can be reactivated by addition of only nuclease-free water. Initial tests for the optimal lyophilization conditions revealed several important points:

cell extract quality is only preserved when cell-extract is mixed with the TXTL reaction buffer prior to lyophilization
the preservation of quality does not depend on the size of lyophilized extract aliquots

We tested the expression quality of several of our home-made cell extracts from fresh and lyophilized aliquots. This comparison also includes the commercially available myTXTL® cell-free expression system (arbor biosciences) and highlights two important results of our efforts to optimize production of cell extract:

our improved cell extract can be lyophilized and retains 40-70 % of its performance
our final settings for cell extract preparation yield extract that clearly outperforms the commercial system, with up to 9-fold higher protein expression

Synthetic Phage Manufacturing

Phages were manufactured based on three components: the cell extract, an energy solution (ATP, GTP, NAD+ etc.) and a supplement solution (amino acids, tRNAs, pholic acid etc.). The only additional component for phage assembly is pure phage DNA. We expanded the assembly platform by

producing the first clinically relevant phages at therapeutic concentrations
manufacturing of therapeutic phages independent of a living pathogen
achieving similar phage titers as the commercial cell extract
determining the amount of DNA necessary for sufficient phage assembly
calculating the amount of DNA produced in the cell extract by replication

DNA Purification

An essential part of bacteriophage manufacturing is the DNA. We extracted it by Phenol-Chloroform precipitation. The Purification was controlled with an agarose gel, where two distinct bands (the proper high-mass band and a low-mass band) were present for all four samples.

To reduce the amount of the low-mass bands, the protocol was changed to a column-based technique. With this technique the incorrect band was significantly reduced in all samples, which was proven with an agarose gel.

Home-Made Cell Extract Achieves Phage Titer Comparable to the Commercial System

We determined the concentration of phages assembled in our cell extracts P15 and E10, which had the most promising results in our cell extract quality control. We compared our extracts to the commercial extract (myTXTL) and saw a similar performance.

All in all, our extract has the same phage assembly potential as the commercial cell extract. Moreover, lyophilization, which makes the cell extract better storable, does not reduce the efficiency of bacteriophage assembly. We concluded that phages could be assembled on site in a durable lyophilized cell extract.

Bacteriophages Can Be Assembled Independent of the Living Host

Phactory has the ability to assemble various bacteriophages, in a bacteria-independent manner. To underline this feature and demonstrate universal applicability, we assembled a variety of different E. coli phages, both DNA and RNA-based.

The successful assembly of all phages was confirmed by plaque assay and transmission electron microscopy (TEM). In addition, DNA encoding for NES and FFP phages was used to perform assembly of these phages in our cell extract. However, we were not in possession of the respective host bacterial strains and therefore could not demonstrate successful assembly.

Pathogenic bacteria such as salmonella, pseudomonas and staphylococcus are prone to develop multi-drug resistance and pose an urgent or serious threat (Centers for Disease Control and Prevention, 2013. Antibiotic/Antimicrobial Resistance.). Therefore, to fulfill this medical need, phages specific for these bacteria should be assembled next in our cell-free system.

TEM class averages of phages assembled in cell extract. We assembled the phages MS2, T4, T5, T7 and the clinically relevant phages CLB-P2, CLB-P3, and GEC-3S.

DNA Concentration Determines Phage Titer

Bacteriophage Titers Correlate With DNA Concentration

To prove the influence of the DNA concentration on the bacteriophage titer, cell extract reactions were prepared with varying T4 DNA concentrations. The bacteriophage production was performed. The titer of the bacteriophages was measured with the top agar method and the formed plaques were counted. The increase in DNA concentration results in an increase in the bacteriophage concentration. This increase is nonlinear as our model predicted. This finding is probably due to a critical concentration of phage proteins, which have to be reached for capsid head assembly (similar to a critical micelle concentration).

Cell-Free Systems Replicate Phage Genomes

The DNA sequence added to the cell-free system serves as the template for the required phage. We saw, that DNA-Polymerases can amplify the DNA segment, multiplying the amount of DNA in the cell-free reaction.⁴

To assess this effect and its dependence on deoxynucleotide triphosphates (dNTPs), we performed an absolute quantification of T7 DNA in the cell-free reaction by quantitative PCR (qPCR). A standard curve with a serial dilution of T7 DNA. We used the TXTL qPCR protocol (add link). We used two selected cell extracts (P15 and E10), which reached similar phage titers compared to the commercial cell extract (myTXTL) in previous experiments. We compared the replication potential in comparison to myTXTL.

The addition of dNTP to the reference reaction leads to an increase in DNA concentration by a factor of 15 in the reaction after 4 hours (290 ng compared to 19 ng). This is higher than in the myTXTL reaction without additional dNTPs, where a 1.8-fold increase in DNA (91 ng compared to 51 ng) after the 4-hour reaction is observed. The home-made cell extracts P10 and E15 however do not resemble this behavior.

It would be desirable to increase DNA amplification in our cell extracts. We therefore conducted a cause analysis, focusing on the T7 replication system. A more than 250-fold increase in processivity of the T7 DNA polymerase is achieved by its binding behavior to E. coli thioredoxin1. We suspected reduced presence of this factor in our cell extract. Thioredoxin could be added to a phage assembly reaction to further test these assumptions. However, our proteome analysis did not confirm that there were low levels of thioredoxin present in our cell extract.

Modular Bacteriophage Composition

Bacteriophage modularity can be achieved by protein engineering without changing the genomic DNA of the bacteriophage and synthetic genome engineering.

Protein engineering

In the TXTL system, it should be possible to modify phage proteins without altering their genome. This was attempted by modifying HOC (highly immunogenic capsid protein), which is part of the capsid protein structure of the T4-phage. Therefore, His-TEV-YFP-HOC was separately expressed and the purified protein was applied to our phage assembly.⁵

For protein modification of the T4 capsid protein HOC, a plasmid for protein expression was cloned and His-YFP-HOC (82kDa) was expressed. The plasmid was transformed into BL21, expressed and purified by nickel affinity chromatography and gel filtration.

After the two chromatography steps, the purified protein had a final concentration of 70µM and no by-products were visible by silver staining. The CD-spectra (minima of 218nm) of the protein corresponds to the model and the Ramachandran plot indicates that the protein was not denatured during purification. Then, the purified protein was intentionally denatured by thermal transition. Thereby, it was confirmed that the protein is stable below 40°C. This is of importance, as phage assembly is performed at 29°C.

The purified protein was added to the assembly mix. Bacteria were transfected with the modified phages. Unbound phages and protein were removed by centrifugation. Fluorescence was measured in dependence of the proximity to the bacteria. Theoretically, YFP intensity should correlate with the binding of YFP-HOC modified phages to the bacteria.

Bacteria infected without (left) and with (right) YFP modified phages

Purification of the modified T4 bacteriophage

To show the possibility of our manufacturing system we modified our T4 bacteriophage at the Hoc protein with the fusion of a His-YFP. In this experiment the His-tag was utilized to purify the bacteriophage solution from the cell extract after the assembly process.

The bacteriophages with the His-tag, were loaded on Ni-NTA beads which where embedded in chromatography columns. After four subsequently washing steps imidazole was used to elute the His-tag from the beads. As a negative control, bacteriophages without a His-tag were treated equally.

To test the purification a spot assay was performed. On the left there are the T4 bacteriophages which were eluted from the sample with the His-Tagged bacteriophages and on the right side there is negative control with the native eluted bacteriophages. The titer of the bacteriophages is lower in the right sample, due to the fact that single plaques are visible, which indicates a low concentration. In contrast the His-tagged bacteriophages, which have a higher concentration, were only one large lysis area is visible.

Phage Genome Engineering

An additional advantage of Phactory is the possibility of rebooting bacteriophages from their genomic template, which is especially important for genetic engineering of bacteriophages. With home-made cell extract it was possible to manufacture an engineered MS2 RNA phage, where a polyhistidine-tag was added on the phage RNA polymerase. The genomic template was generated via gibson assembly and PCR amplification. After purification of the engineered genome, phages were assembled in our self-made P15 cell extract. A plaque assay confirmed the successful assembly of functional phages with a titer of 3 × 10⁷ PFU/ml.

To test the his-tag modification, the Phages were amplified in a bacterial culture flask. After lysis of the bacteria the tagged polymerase was purified from the supernatant by nickel affinity chromatography. An SDS-PAGE proved that the 62 kDa Protein remained in the Nickel column due to the successfully engineering of an inserted His-tag.

Quality Control

Quality control covers several aspects of phage manufacturing including phage functionality, endoxin levels and DNA purity. We found that

we are able to produce functional phages in our cell extract
the cell extract of our optimized strain has an endotoxin content below the detection limit and our regular self-produced cell extract has fewer endotoxins than the commercial cell extract
next-generation sequencing allowed us to accurately quantify contamination
phenol-chloroform extraction leads to a large amount of contaminating DNA which complicates phage assembly
next-generation sequencing helped us to improve our purification protocols, leading to improved phage assembly

Assessing Phage Functionality by Plaque Assays

We performed a Plaque Assay to determine the activity of the viable phages (titer) in our assembly batch. By creating serial dilutions, we were able to calculate a plaque forming units/milliliter (PFU/ml) value. The plaque assay protocol was used.

Assessing Endotoxin Levels

Msb-B Knockouts Reduce Endotoxin Levels By 49-Fold

Endotoxins are pyrogens deriving from gram-negative bacteria. Their removal from any pharmaceutical product is mandatory. Therefore, we engineered an E. coli strain lacking lipid A, a major endotoxin component and used this bacterium to produce our cell extract. To evaluate endotoxin content of different cell extracts, a Limulus Amebocyte Lysate (LAL)-test was performed according to the supplier manual. As a reference, we compared the cell extract from our msbB-deficient strain (K2) to a cell extract from a wild-type strain (K4) as well as a commercial cell-free system (myTXTL, Arbor Biosciences). A solution with lysed E. coli served as a positive control.

Compared to the K4 strain our msbB-deficient K2 cell extract had 49-fold reduced endotoxin levels (0.06 EU/ml compared to 2.94 EU/ml). Other cell extracts such as the P15 cell extract (3.83 EU/ml) and the commercial myTXTL (4.65 EU/ml) had even higher endotoxin contents.

A calibration curve using known endotoxin concentrations is required for the LAL-Test. A dilution series ranging from 0.625 EU/ml to 5 EU/ml. The fitting curve is used to interpolate the concentrations in the unknown sample. The linear fit of the calibration curve had a R2 of 0.98, an intersection with the y-axis at 0.38 and a slope of 0.39 ml/EU. These values are in accordance with the requirements of the LAL-Test manufacturer.

Removal of endotoxins is impeded by their tendency to form stable interactions with other biomolecules. Our method of preventing the lipid A biosynthesis is therefore superior to extensive isolation steps required for removing endotoxins in conventional phage production.

Nanopore Sequencing Enhances DNA Purification

Besides the cell extract, the DNA quality is the key to phage assembly. Impure DNA (Host DNA, proteins contamination) complicates the assembly of the phage within the cell lysate. A highly sensitive method to measure DNA is Oxford Nanopore sequencing.⁶

Our first attempts with classical chloroform/phenol extraction failed because of low molecular DNA (agarose gel). Therefore, we decided to search for other purification protocols, DNAse I and the Norgene kit (46800) tremendously increased DNA purity. With this DNA, we were able to achieve high titers by assembly.

Sequ-Into Allows For Accurate Detection of DNA Contamination Levels

The laboratory team sequenced T7, 3S, NES and FFP bacteriophages genomes (preparation protocols).

Experiment	Sequencing Time	Reads Sequenced	Base-pairs sequenced
T7	12h 02min	424,198	1.27 × 10⁹
3S	3h 42min	77,092	2.53 × 10⁸
NES	3h 58min	39,501	2.31 × 10⁸
NFFP	5h 42min	27,633	1.23 × 10⁸

The main task after receiving genomes was to assemble the phage genomes from the Nanopore reads without the reference genome and gain the origin sequence. There are several tools available but for minION Nanopore recommended tools are "canu" and "miniasm" of which we used the latter.

Despite an excellent lab team, we have been confronted with a major problem: contamination. Contamination is a problem regarding the therapeutic usage of the bacteriophages, but also an important factor in any bioinformatics pipeline because contamination-based reads can confuse the assembly process. We thus developed Sequ-Into to detect the contamination and also get rid of contamination-originated reads. In the context of our project, several DNA purification protocols were evaluated with Sequ-Into. This allowed iterative engineering cycles in Phactory, leading to unparalleled purity of up to 96% (bases sequenced).

While evaluating the sequencing data with Sequ-Into, we noticed that in the first 10% of the sequencing time of each experiment, more non-target reads were sequenced than in any latter time interval. Moreover, we found that this also holds true for the first x sequenced reads, which allowed us to setup sequ-into such that it only analyses the first 1000 reads of a minION sequencing experiment, speeding up computation and enabling en-run analysis.

More non-target reads sequenced in the first 10% of the sequencing time of each experiment.

Equal Results are shown for the first x sequenced reads.

After getting rid of the contamination, we noticed a non-uniform coverage in the phage genome assemblies after re-aligning the reads to the assembly.

Rearranging the middle part which initially was “over-expressed” and re-assembling led us to the expected uniform coverage of the de-novo genome sequence after re-aligning the input reads. Finally, we could predict coding-sequences and visualize all descriptive statistics in genome diagrams.

More details at Data Analysis page.

Encapsulation

After successful bacteriophage production and toxicity evaluation the final step of the manufacturing pipeline is therapeutic application. By nature, bacteriophages possess a relatively short have-life when orally administered. Encapsulation in alginate negates this effect by protecting phages from gastric fluid. ⁷

We constructed a simple device that allows us to encapsulate our bacteriophages in alginate droplets.

Droplets are Monodisperse

In order to achieve defined phage concentrations and therefore defined doses, we optimized the monodispersity of our alginate droplets.

In our initial attempts to create alginate droplets the size within a batch often varied significantly. Additionally, a lot of droplets were lost due to aggregation. Optimization of parameters such as flow rate, alginate concentration and N2 pressure led to an increase of monodispersity for all tested sizes (50-300 μm). Specifically, an alginate concentration of 1.8 % alginate and 0.2 % low-viscosity alginate proved to be ideal. Pressure and flow rate determine the droplet sizes and can be varied.

Bacteriophages Encapsulated In Alginate Can Withstand Gastric Acid

The main problem of oral application is the acidic environment in the gastric fluid, necessitating protective measures against degradation. The other requirement of phage protection is the release of functional phages in the intestine. For this reason, we compared the behavior of the encapsulated phages and non-encapsulated phages in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF).

In SGF, the number of active non-encapsulated phages decreases by more than 99.99 % within an hour. This shows the urgent need of a form of protection. As a reference, we used phages that were chemically released by citrate from alginate droplets.

In comparison, the encapsulated phages were tested in SGF for the same time as the non-encapsulated phages. Afterwards, the same droplets were exposed for two hours to simulated intestinal fluid to test the release of functional bacteriophages in this environment.

The encapsulated phages were hardly released in a timeframe of one hour when exposed to SGF. After transferring the capsules to SIF the number of active phages reached that of the reference. This indicates that the encapsulation of bacteriophages in alginate capsules enables the possibility of an oral application. Further experiments could test the alginate capsules in an animal model system.

@@ Line 3: / Line 3: @@
 <style>
-    .pictureTitle{
+.pictureTitle{
-        background: linear-gradient(rgba(0,0,0,.5), rgba(0,0,0,.8)), url("https://static.igem.org/mediawiki/2018/b/bf/T--Munich--background_results.png");
+    background: linear-gradient(rgba(0,0,0,.3), rgba(0,0,0,.5)), url("https://static.igem.org/mediawiki/2018/6/66/T--Munich--header_applied_design.png");
-        background-repeat: no-repeat;
+    background-repeat: no-repeat;
-        background-size: cover;
+    background-size: cover;
-        background-position:center;
+    background-position:center;
-    }
+}
+#accordion .card {
+    margin-bottom: 10px;
+    border: 2px solid rgba(0,0,0,.4);
+}
+#accordion .card-header {
+padding:0;
+background-color:#00A7D4;
+}
+#accordion h5 {
+padding:0;
+}
+#accordion .card button{
+width: 100%;
+text-align: left!important;
+}
+#accordion button span {
+    font-size: 1.5rem;
+}
+@media only screen and (max-width: 809.99px) {
+    #accordion button span {
+    font-size: 1rem;
+    }
+}
 @media only screen and (max-width: 575.98px) {}
@@ Line 26: / Line 49: @@
                       Results
                      </div>
-         <h4>Whats Good, Whats Bad</h4>
+         <h4></h4>
 </div>
 <div class="phaContainer">
    <aside id="phaContentsOuter">
+  <aside id="phaContents" class="table-of-contents">
+    <!-- will be generated with JS -->
+  </aside>
    </aside>
-<main class="post-content">
+  <main class="post-content">
+<!---
+    <div class="row">
+    <div class="col-12 text-center">
+    <figure class="figure" >
+    <img src="https://static.igem.org/mediawiki/2018/2/2b/T--Munich--MS_3S_phage.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">BIG BROTHER IS WATCHING YOU</figcaption>
+    </figure>
+    </div>
+    </div>
+--->
+<div class="row">
+<div class="col-12">
+<p>
+Phages are bacteria specific organisms, not harmful to humans and more specific than antibiotics. With Phactory it is possible to produce therapeutically relevant phages independent of the corresponding pathogen. This was done in our optimized home-made cell extract. With Phactory, we achieved a stable manufacturing process which produces phages with the titer and purity required for patient treatment.
+</p>
+</div>
+</div>
-<div class="column full_size">
+<h2>Optimizing a Cell-Free Expression System</h2>
-<h1>Results</h1>
+<div class="row" style="background-color: rgba(200,200,200,1);">
-<p>Here you can describe the results of your project and your future plans. </p>
+<div class="col-12">
+<p>
+The first part of our project is the optimization of a cell-free expression system as a manufacturing platform for bacteriophages.
+For our purpose, it is necessary to produce a high-quality cell extract, in a reproducible and easy manner.
+We focused on achieving the following goals for our cell extract:
+</p>
+</div>
 </div>
+<div class="row" style="background-color: rgba(200,200,200,1);">
+<div class="col-12">
+<ul style="">
+<li>increasing the protein content</li>
+<li>finding reproducible methods of quality control</li>
+<li>producing cell-extract that allows phage assembly</li>
+</ul>
+</div>
+</div>
-<div class="column third_size" >
+<div class="row" style="background-color: rgba(200,200,200,1);">
+<div class="col-12">
+<p>
+<br>
+Considering a possible commercial application of our product we decided to furthermore evaluate the potential for scaling up of our preparation protocol.
+<br>
+We chose to try several different approaches to achieve these goals:
+</p>
+</div>
+</div>
-<h3>What should this page contain?</h3>
+<div class="row" style="background-color: rgba(200,200,200,1);">
-<ul>
+<div class="col-12">
-<li> Clearly and objectively describe the results of your work.</li>
+<ul style="">
-<li> Future plans for the project. </li>
+<li>testing cell cultivation in a bioreactor to enable upscaling</li>
-<li> Considerations for replicating the experiments. </li>
+<li>finding optimal lysis conditions that produce high-quality extract</li>
+<li>scaling up of cell lysis</li>
 </ul>
+</div>
 </div>
+<div class="row" style="background-color: rgba(200,200,200,1);">
+<div class="col-12">
+<p>
+<br>
+We found that:
+</p>
+</div>
+</div>
+<div class="row" style="background-color: rgba(200,200,200,1);">
+<div class="col-12">
+<ul style="">
+<li>bioreactor cultivation allows for upscaling of cell extract production</li>
+<li>sonication and lysozyme improve the performance of cell extract</li>
+<li>cultivation and extract preparation barely impact cell extract composition </li>
+<li>lyophilization is a good choice for cell-extract storage</li>
+</ul>
+</div>
+</div>
+<!---
+<div class="row">
+<div class="col-12">
+<ul style="">
+<li>biorector cultivation, sonication, lysozyme enhance the performance</li>
+<li>different cultivation and cell disruption methods do not overly impact the protein composition, but probably the activity of the expressed protein</li>
+<li>lyophilization is a good way to store cell extract</li>
+</ul>
+</div>
+</div>
+--->
-<div class="column two_thirds_size" >
+<hr>
-<h3>Describe what your results mean </h3>
-<ul>
+<h3>
-<li> Interpretation of the results obtained during your project. Don't just show a plot/figure/graph/other, tell us what you think the data means. This is an important part of your project that the judges will look for. </li>
+Bioreactor Cultivation Allows For Upscaling Of Cell Extract Production
-<li> Show data, but remember all measurement and characterization data must be on part pages in the Registry. </li>
+</h3>
-<li> Consider including an analysis summary section to discuss what your results mean. Judges like to read what you think your data means, beyond all the data you have acquired during your project. </li>
-</ul>
+    <div class="row">
+    <div class="col-12 col-md-6">
+<p>Cultivating bacteria is the first step in cell extract preparation. The cell extract preparation protocol of Sun et al.<sup><a href="#phareferences">1</a></sup> uses shaking flask cultivation for biomass production. It recommends cell harvest in the mid-log growth phase at OD 1.8-2.0 to produce high-quality cell extract. We recorded growth curves for shaking flask cultivation and bioreactor cultivation in a lab-scale bioreactor, to compare biomass production under different culture conditions.
+</p>
+    </div>
+    <div class="col-12 col-md-6">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/2/2b/T--Munich--WL2_fermenter.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">Growth curves for cell cultivation in a shaking flask and a 2 L bioreactor. Growth curves were approximated by fitting a logistic function (line).</figcaption>
+    </figure>
+    </div>
+    </div>
+    <div class="row">
+    <div class="col-12 col-md-6">
+<p>The growth curve from shaking flask cultivation revealed that the mid-log growth phase correlates to an OD of around 2. In bioreactor cultivation the mid-log growth phase is prolonged, due to the better aeration of the medium, and corresponds to an OD between 4 and 6. We harvested cells at OD 4, 5 and 6 to test which harvest point is most suitable to produce high quality cell extract.
+</p>
+    </div>
+    <div class="col-12 col-md-6">
+  <figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/0/02/T--Munich--WL2_fermenter2.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">Protein content (grey) and fluorescence intensity (blue) in cell extract in different cultivation conditions.</figcaption>
+    </figure>
+    </div>
+    </div>
+<div class="row">
+<div class="col-12">
+<p>
+The test revealed that the protein content is higher when cells were harvested at a higher OD, with OD 5 yielding the highest protein content. In addition, the cell extract from OD 5 produces the highest fluorescence intensity in the TXTL test.
+Compared to a cell extract from shaking flask cultivation the signal is reduced to about 60 %. The most likely cause for this result
+is that a higher fraction of proteins in the OD 5 cell extract is inactive, possibly due to protein damage during cell lysis (at the time of this experiment, cell lysis was not yet fully optimized).
+</p>
+<p>
+  The comparison of cultivation methods revealed that cultivation in a bioreactor is an applicable alternative to shaking flask cultivation and offers great potential for upscaling of cell extract preparation. In our 2 L lab-scale bioreactor we were able to produce 20 g of cell pellet, compared to 4-5 g that 2 L of shaking flask cultivation yield.
+</p>
+</div>
 </div>
+<hr>
-<div class="clear extra_space"></div>
+<h3>
+Sonication and Lysozyme Improve the Performance of Cell-Extract
+</h3>
+<h5>Sonication</h5>
+<div class="row">
+<div class="col-12">
+<p>We tested three different cell lysis methods: beat beating, French press and sonication. Beat beating is an inexpensive and widely employed method
+  but upscaling is problematic, and the preparation is tedious and time-consuming. High-pressure cell disruption in a so called ‘French-press’ is also
+  used but these devices are very expensive and not widely prevalent. This contradicts our effort to provide a generally-applicable protocol for preparation
+  of home-made cell extract. A sonication device on the other hand is available in most biochemical labs as it is a commonly used method for cell lysis in
+  protein purification protocols. Nevertheless, we started by comparing all three lysis methods with settings commonly applied for cell lysis.
+</p>
+</div>
+</div>
+<div class="row">
+    <div class="col-12 col-md-6">
+<p>Our initial test showed that cell lysis by sonication yields extract with up to 2.8- and 4.4 fold higher expression than cell lysis by bead beating and French press respectively. These findings combined with the limited options of optimization for both bead beating and French press lysis as well as restricted potential for scaling up of bead beating, lead to the decision to focus our optimization efforts on sonication as lysis method.</p>
+    </div>
+    <div class="col-12 col-md-6">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/f/fc/T--Munich--Lysis_methods.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption"><p>Comparison of different cell lysis methods for cell extract preparation.</p></figcaption>
+</figure>
-<div class="column two_thirds_size" >
+    </div>
-<h3> Project Achievements </h3>
+    </div>
-<p>You can also include a list of bullet points (and links) of the successes and failures you have had over your summer. It is a quick reference page for the judges to see what you achieved during your summer.</p>
+<div class="row">
+<div class="col-12">
+<p>Cell lysis by sonication has two main parameters that can be varied: the amplitude, which correlates to the power emitted by the sonication device and cycle number, representing the total time of sonication. Based on Yong-Chan Kwon & Michael C. Jewett<sup><a href="#phareferences">2</a></sup> we decided to use 10 s pulses with 15 s pause between pulses to prevent excessive heating of the sample.
+</p>
+</div>
+</div>
-<ul>
+<div class="row">
-<li>A list of linked bullet points of the successful results during your project</li>
+<div class="col-12 col-md-6">
-<li>A list of linked bullet points of the unsuccessful results during your project. This is about being scientifically honest. If you worked on an area for a long time with no success, tell us so we know where you put your effort.</li>
+<figure class="figure">
+<img src="https://static.igem.org/mediawiki/2018/f/f6/T--Munich--Results-WL2_NEW_Protein_Content.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+</figure>
+</div>
+<div class="col-12 col-md-6">
+<figure class="figure">
+<img src="https://static.igem.org/mediawiki/2018/9/97/T--Munich--Results-WL2_NEW_mTurq.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+</figure>
+</div>
+</div>
+<div class="row">
+<div class="col-12">
+    <figcaption class="figure-caption">Screening of different amplitudes and cycle numbers for sonication.</figcaption>
+</div>
+</div>
+<div class="row">
+    <div class="col-12">
+<p>
+  <br>
+  Our screening revealed that increase in amplitude as well as increase in cycle number leads to higher protein content. The TXTL test showed high fluorescence intensity only for settings with low cycle numbers. This indicates that prolonged sonication damages the cellular machinery, reducing its ability for protein expression.
+</p>
+<p>
+  The highest-performing extracts were those obtained by sonication with 4 cycles at 33 % amplitude and 5 cycles at 10 % amplitude. Therefore, we focused our next steps on further optimization of those settings.
+</p>
+    <h5>Lysozyme</h5>
+    <div class="row">
+    <div class="col-12">
+    <p>In the last step we made an effort to scale up the sonication step. Preliminary experiments (results not shown) indicated 4 mL as the maximal sample volume that could be lysed efficiently with the device we had at our disposal. As indicated in the publication by Yong-Chan Kwon & Michael C. Jewett the number of sonication cycles was increased in proportion to the increase of sample volume. The presented results shown in the figure below show that this approach was successful: Using higher sample volumes for sonication increased protein content and expression quality of the cell extract. This proves that upscaling of cell extract preparation with cell lysis by sonication is indeed feasible.
+    </div>
+    </div>
+    <div class="row">
+        <div class="col-12 col-md-6">
+        <figure class="figure">
+        <img src="https://static.igem.org/mediawiki/2018/5/52/T--Munich--Results_Wl2_lysoprot.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+        </figure>
+        </div>
+        <div class="col-12 col-md-6">
+        <figure class="figure">
+        <img src="https://static.igem.org/mediawiki/2018/a/ae/T--Munich--Results_Wl2_lysofluo.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+        </figure>
+        </div>
+    </div>
+    <div class="row">
+    <div class="col-12">
+        <figcaption class="figure-caption">Comparison of cell lysis conditions: increase of sample volume and use of lysozyme.</figcaption>
+    </div>
+    </div>
+    <div class="row">
+    <div class="col-12">
+    <p>
+      <br>
+      Even though previous attempts by Shresta et al.<sup><a href="#phareferences">3</a></sup> to use Lysozyme in cell extract preparation have been unsuccessful, we tested the effect of adding the cell-wall degrading enzyme at 1 mM concentration to the cell lysis reaction. Across all our experiments, lysozyme increased the efficiency of cell lysis for all tested settings. Moreover, the expression quality was likewise increased after Lysozyme addition, indicating that the remaining enzyme does not interfere with protein biosynthesis.
+    </p>
+    </div>
+    </div>
+    <h5>Cell Extract Processing</h5>
+    <div class="row">
+    <div class="col-12">
+    <p>
+      Cultivation and cell lysis are the apparent most crucial steps in preparation of cell extract but there are other steps that can have a great impact on cell extract quality. Some of our findings regarding those steps are:
+    </p>
+    </div>
+    </div>
+    <div class="row">
+    <div class="col-12">
+    <ul style="">
+    <li>Freezing cell pellets overnight for next-day processing does not interfere with extract quality but confers a major simplification of cell extract preparation</li>
+    <li>Preliminary results indicate that omitting the run-off reaction after lysis does not significantly impair extract quality</li>
+    <li>Dialysis of cell extract can be substituted by diafiltration in centrifugal filters without reducing the expression yield of the resulting extract </li>
+    </ul>
+    </div>
+    </div>
+<hr>
+<h3>Characterizing Cell Extract Quality </h3>
+<div class="row">
+<div class="col-12">
+<p>
+In order to validate the success of our optimization efforts, adequate characterization of cell extract is indispensable.
+Here we will give a short review about the tools for quality assessment we implemented. Further details about characterization
+of these tools are available on the <a href="https://2018.igem.org/Team:Munich/Measurement">Measurement</a> page.
+</p>
+<p>
+We had initially defined increase of protein content in cell extract as optimization goal. However, as we realized early on, protein content alone is not a good measure for extract quality, because it provides no information about the activity of the cellular machinery.
+</p>
+</div>
+</div>
+<div class="row">
+<div class="col-12 col-md-6">
+<p>
+To assess functionality of cell extract, testing of protein expression is necessary, which can be achieved by expressing fluorescent proteins and measuring the fluorescence time trace in a plate reader. To find the optimal quality control we compared the performance of different fluorescent proteins in cell extract.
+</p>
+<p>
+We chose expression of mTurquoise – a variant of Cyan Fluorescent Protein (CFP) – as our favorite quality control for cell extract, as it results in high fluorescence intensity in a reproducible manner.
+</p>
+</div>
+<div class="col-12 col-md-6">
+  <figure class="figure">
+  <img src="https://static.igem.org/mediawiki/2018/e/e0/T--Munich--Results-WL2_Four_Fluorescence.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+  </figure>
+</div>
+</div>
+<div class="row">
+<div class="col-12 col-md-6">
+<p>
+In addition, to examining protein expression we decided to analyze transcription uncoupled from translation by transcribing an RNA aptamer that binds a fluorescent dye.
+<p>
+We compared the fluorescence time trace of a Malachite Green binding aptamer in different cell extract samples. The fluorescence time traces decline after 30-50min, indicating that RNA degradation starts to prevail over transcription. Differences in the observed kinetics can be explained by variations in cell extract composition.
+</p>
+</div>
+<div class="col-12 col-md-6">
+  <figure class="figure">
+  <img src="https://static.igem.org/mediawiki/2018/e/e3/T--Munich--WL2_MG_aptamer.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+  </figure>
+</div>
+</div>
+<h3>
+Cultivation and Extract Preparation Barely Impacts Cell Extract Composition
+</h3>
+<div class="row">
+    <div class="col-12 col-md-6">
+      <p>
+    The main question was if the different performance of the cell extracts (P15, E10, myTXTL), especially concerning phage titers, is due to a divergent composition or caused by a discrepancy in activity of the relevant proteins e.g. transcription and translation related proteins
+    Therefore, one student was sent to Bavarian Biomolecular Mass Spectrometry Centre (BayBioMS), where he analyzed the samples under the supervision of Dr. Christina Ludwig.
+    </p>
+<p>The results of the Mass Spectrometry gave us insight into the composition of the different TXTLs. We were able to identify 1771 proteins in all the extracts. The results indicate a high homogeneity between all three TXTLs, as illustrated in the heatmap.
+Based on the LFQ values (Label Free Quantification) a volcano plot of two samples (Arbor/E10, Arbor/P15 and E10/P15) was generated. In general, there is no protein more frequent in Arbor TXTL in comparison to E10 and P15. In contrast, some translation related proteins were slightly more abundant in E10 and P15 like certain tRNA ligases (PheS and PheT). The RecBCD subunits (the dsDNA degrading complex) is of similar abundance in all TXTLs, showing the importance to consider its negative impact on the assembly. The results were further validated with DAVID, a tool for finding metabolic pathways based on proteomic data. The identified pathways indicate no correlation with transcription/translation related pathways (data not shown).
+</p>
+<p>
+We concluded that the performance difference is most likely due to decreased activity during TXTL preparation rather than a change in composition.
+</p>
+    </div>
+    <div class="col-12 col-md-6">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/5/5f/T--Munich--Results_Wl3_heatmap.png " class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">Illustration of the abundance of all sequenced proteome of duplicates from P15, E10 and myTXTL based on LFQ values. Heatmap of the label-free quantification intensities of all proteins identified. Diagram shows duplicate samples from the three cell extracts analyzed. Green indicates high expression, red indicates low expression. </figcaption>
+    </figure>
+    </div>
+    </div>
+ <div class="row">
+    <div class="col-12 col-md-4">
+ <figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/a/a2/T--Munich--Results_arbor_p15_volcano.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">Arbor p15</figcaption>
+        </figure>
+</div>
+    <div class="col-12 col-md-4">
+  <figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/d/d8/T--Munich--Results_arbor_e10_volcano.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">Arbor e10</figcaption>
+      </figure>
+    </div>
+  <div class="col-12 col-md-4">
+  <figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/0/0c/T--Munich--Results_e10_p15_volcano.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">e10 p15</figcaption>
+      </figure>
+    </div>
+    <div class="col-12">
+      <figcaption class="figure-caption">Volcano plots of myTXTL vs. P15 (A), myTXTL vs. E10 (B) and E10 vs. P15 (C),  LC-MS/MS measurements of the E. coli proteome lysates were performed in duplicates on a Q-Exactive HFX instrument in data-dependent acquisition mode (Top18 method). Total protein injection amount was 0.5 µg. Gradient length was 1h. The data was then analyzed using MaxQuant and the Uniprot E. coli K12 FASTA file. The LFQ data was filtered for proteins that occur in both duplicates of at least one cell lysate group (Arbor E10 P14).</figcaption>
+      </div>
+    </div>
+<hr>
+<h3>
+Lyophilization Is a Good Choice for Cell-Extract Storage
+</h3>
+<div class="row">
+<div class="col-12">
+<p>
+With regard to global application of Phactory it is crucial to enable long-term storage and shipping of our cell extract. In order to fulfill these requirements, we chose to freeze-dry our cell extract. Lyophilized extract can be stored at ambient temperature and can be reactivated by addition of only nuclease-free water.
+Initial tests for the optimal lyophilization conditions revealed several important points:
+</p>
+<ul style="">
+<li>cell extract quality is only preserved when cell-extract is mixed with the TXTL reaction buffer prior to lyophilization</li>
+<li>the preservation of quality does not depend on the size of lyophilized extract aliquots</li>
 </ul>
+<br>
+<br>
+</div>
+</div>
+    <div class="row">
+    <div class="col-12 col-md-6">
+<p>We tested the expression quality of several of our home-made cell extracts from fresh and lyophilized aliquots. This comparison also includes the commercially available myTXTL® cell-free expression system (arbor biosciences) and highlights two important results of our efforts to optimize production of cell extract:
+</p>
+<ul style="">
+<li>our improved cell extract can be lyophilized and retains 40-70 % of its performance</li>
+<li>our final settings for cell extract preparation yield extract that clearly outperforms the commercial system, with up to 9-fold higher protein expression</li>
+</ul>
+    </div>
+    <div class="col-12 col-md-6">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/4/49/T--Munich--Results-WL2_LYO_vs_FRESH.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">Our two tested samples of cell extract retained 70 and 90 % of expression quality respectively after lyophilization.</figcaption>
+    </figure>
+    </div>
+    </div>
+<h2>
+Synthetic Phage Manufacturing
+</h2>
+<div class="row" style="background-color: rgba(200,200,200,1);">
+<div class="col-12">
+<p>
+Phages were manufactured based on three components: the cell extract, an energy solution (ATP, GTP, NAD+ etc.) and a supplement
+solution (amino acids, tRNAs, pholic acid etc.). The only additional component for phage assembly is pure phage DNA. We expanded the assembly platform by
+</p>
+</div>
 </div>
+<div class="row" style="background-color: rgba(200,200,200,1);">
+<div class="col-12">
+<ul style="">
+<li>producing the first clinically relevant phages at therapeutic concentrations</li>
+<li>manufacturing of therapeutic phages independent of a living pathogen</li>
+<li>achieving similar phage titers as the commercial cell extract</li>
+<li>determining the amount of DNA necessary for sufficient phage assembly</li>
+<li>calculating the amount of DNA produced in the cell extract by replication</li>
+</ul>
+</div>
+</div>
+<h3>
+DNA Purification
+</h3>
+<div class="row">
+    <div class="col-12 col-md-6">
+<p> An essential part of bacteriophage manufacturing is the DNA. We extracted it by Phenol-Chloroform precipitation. The Purification was controlled with an agarose gel, where two distinct bands (the proper high-mass band and a low-mass band) were present for all four samples.
+</p>
+<p> To reduce the amount of the low-mass bands, the protocol was changed to a column-based technique. With this technique the incorrect band was significantly reduced in all samples, which was proven with an agarose gel.</p>
+</div>
+<div class="col-12 col-md-6">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/f/fe/T--Munich--agarose_gel_dirty_phage.jpeg " class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption"> The agarose gel shows the DNA of a phenol chloroform purification of the bacteriophage genomes from left to right T7, GEC-3S, T4 and NES. The ladder in the first lane from left is the 1kb extended range ladder from NEB.</figcaption>
+    </figure>
+</div>
+<div class="col-12 col-md-6">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/7/77/T--Munich--agarose_gel_clean_phage.jpeg" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption"> The agarose gel shows the DNA of bacteriophages which was column purified. The bands are from left to right, a the 1kb extended range ladder from NEB the CLB-P2, CLP-P3, T4, T5, T7, NES, FFP and GEC-3S bacteriophage.
+</figcaption>
+    </figure>
-<div class="column third_size" >
-<div class="highlight decoration_A_full">
+</div>
-<h3>Inspiration</h3>
+</div>
-<p>See how other teams presented their results.</p>
-<ul>
-<li><a href="https://2014.igem.org/Team:TU_Darmstadt/Results/Pathway">2014 TU Darmstadt </a></li>
-<li><a href="https://2014.igem.org/Team:Imperial/Results">2014 Imperial </a></li>
+<h3>
-<li><a href="https://2014.igem.org/Team:Paris_Bettencourt/Results">2014 Paris Bettencourt </a></li>
+Home-Made Cell Extract Achieves Phage Titer Comparable to the Commercial System
+</h3>
+<div class="row">
+    <div class="col-12 col-md-6">
+<p>We determined the concentration of phages assembled in our cell extracts P15 and E10, which had the most promising
+  results in our cell extract quality control. We compared our extracts to the commercial extract (myTXTL) and saw a similar performance.
+</p>
+<p>
+  All in all, our extract has the same phage assembly potential as the commercial cell extract. Moreover, lyophilization, which makes
+  the cell extract better storable, does not reduce the efficiency of bacteriophage assembly. We concluded that phages could be assembled on site in a durable lyophilized cell extract.
+</p>
+    </div>
+    <div class="col-12 col-md-6">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/7/79/T--Munich--Results_Phage_Titer.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">Comparison of assembled T7 phage in our extracts (P15 and E10) in comparison to the commercial extract (myTXTL). Blue bars indicate an assembly within fresh extract, whereas red indicates an assembly in a lyophilized cell extract.</figcaption>
+    </figure>
+    </div>
+    </div>
+<hr>
+<h3>
+Bacteriophages Can Be Assembled Independent of the Living Host
+</h3>
+<div class="row">
+<div class="col-12">
+<p>
+Phactory has the ability to assemble various bacteriophages, in a bacteria-independent manner. To underline this feature and demonstrate universal applicability, we assembled a variety of different E. coli phages, both DNA and RNA-based.
+</p>
+<br>
+<br>
+</div>
+</div>
+    <div class="row">
+    <div class="col-12 col-md-6">
+<p>The successful assembly of all phages was confirmed by plaque assay and transmission electron microscopy (TEM). In addition, DNA encoding for NES and FFP phages was used to perform assembly of these phages in our cell extract. However, we were not in possession of the respective host bacterial strains and therefore could not demonstrate successful assembly.
+</p>
+<p>
+Pathogenic bacteria such as salmonella, pseudomonas and staphylococcus are prone to develop multi-drug resistance and pose an urgent or serious threat (Centers for Disease Control and Prevention, 2013. Antibiotic/Antimicrobial Resistance.). Therefore, to fulfill this medical need, phages specific for these bacteria should be assembled next in our cell-free system.
+</p>
+    </div>
+    <div class="col-12 col-md-6">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/7/76/T--Munich--Results--WL3_Titer_difference.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+      <figcaption class="figure-caption"> Overview of the successfully assembled phages. MS2 (RNA-phage), T4 (DNA phage), T5 (DNA phage), T7 (DNA phage), CLB-P2 (clinically relevant), CLB-P2 (clinically relevant), GEC-3S P2 (clinically relevant).</figcaption>
+    </figure>
+    </div>
+    </div>
+<div class="row">
+<div class="col-12 col-md-3">
+  <figure class="figure">
+      <img src="https://static.igem.org/mediawiki/2018/2/29/T--Munich--Results-classaverage_MS2.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+      <figcaption class="figure-caption">Phage MS2.</figcaption>
+      </figure>
+</div>
+<div class="col-12 col-md-3">
+  <figure class="figure">
+      <img src="https://static.igem.org/mediawiki/2018/3/32/T--Munich--Results-classaverage_T4.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+      <figcaption class="figure-caption">Phage T4.</figcaption>
+      </figure>
+</div>
+<div class="col-12 col-md-3">
+  <figure class="figure">
+      <img src="https://static.igem.org/mediawiki/2018/8/8a/T--Munich--Results-classaverage_T5.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+      <figcaption class="figure-caption">Phage T5.</figcaption>
+      </figure>
+</div>
+<div class="col-12 col-md-3">
+  <figure class="figure">
+      <img src="https://static.igem.org/mediawiki/2018/a/a4/T--Munich--Results-classaverage_T7.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+      <figcaption class="figure-caption">Phage T7.</figcaption>
+      </figure>
+</div>
+</div>
+<div class="row">
+  <div class="col-12 col-md-3">
+    <figure class="figure">
+        <img src="https://static.igem.org/mediawiki/2018/e/e1/T--Munich--Results-classaverage_P2.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+        <figcaption class="figure-caption">Phage CLB-P2.</figcaption>
+        </figure>
+  </div>
+  <div class="col-12 col-md-3">
+    <figure class="figure">
+        <img src="https://static.igem.org/mediawiki/2018/6/66/T--Munich--Results-classaverage_P3.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+        <figcaption class="figure-caption">Phage CLB-P3.</figcaption>
+        </figure>
+  </div>
+  <div class="col-12 col-md-3">
+    <figure class="figure">
+        <img src="https://static.igem.org/mediawiki/2018/2/2e/T--Munich--Results-classaverage_3S.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+        <figcaption class="figure-caption">Phage GEC-3S.</figcaption>
+        </figure>
+  </div>
+  <div class="col-12 col-md-3">
+  <figure class="figure">
+   <img src="https://static.igem.org/mediawiki/2018/5/54/T--Munich--GEC_3S_movie.gif" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure." rotate="90">
+     <figcaption class="figure-caption"> 3D reconstruction of Transmission electron microscopy images of the GEC-3S bacteriophage. </figcaption>
+   </figure>
+ </div>
+</div>
+<div class="row">
+<div class="col-12">
+  <figcaption class="figure-caption">TEM class averages of phages assembled in cell extract. We assembled the phages MS2, T4, T5, T7 and the clinically relevant phages CLB-P2, CLB-P3, and GEC-3S.</figcaption>
+</div>
+</div>
+<hr>
+<h3>DNA Concentration Determines Phage Titer</h3>
+<h5>Bacteriophage Titers Correlate With DNA Concentration</h5>
+<div class="row">
+    <div class="col-12">
+<p>To prove the influence of the DNA concentration on the bacteriophage titer, cell extract reactions were prepared with varying T4 DNA concentrations. The bacteriophage production was performed. The titer of the bacteriophages was measured with the top agar method and the formed plaques were counted. The increase in DNA concentration results in an increase in the bacteriophage concentration. This increase is nonlinear as our <a href="https://2018.igem.org/Team:Munich/Model">model</a> predicted. This finding is probably due to a critical concentration of phage proteins, which have to be reached for capsid head assembly (similar to a critical micelle concentration).
+</p>
+    </div>
+    </div>
+    <div class="row">
+        <div class="col-12 col-md-6">
+     <figure class="figure">
+        <img src="https://static.igem.org/mediawiki/2018/7/70/T--Munich--Results_DNA_CONC_T4.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+        <figcaption class="figure-caption">Assembly of the T4 phage depending on the DNA concentration.</figcaption>
+            </figure>
+    </div>
+        <div class="col-12 col-md-6">
+      <figure class="figure">
+        <img src="https://static.igem.org/mediawiki/2018/0/0d/T--Munich--Results_DNA_CONC_T7.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+        <figcaption class="figure-caption">Assembly of the T7 phage depending on the DNA concentration.</figcaption>
+          </figure>
+        </div>
+        </div>
+<h5>Cell-Free Systems Replicate Phage Genomes</h5>
+<div class="row">
+    <div class="col-12 col-md-6">
+<p>The DNA sequence added to the cell-free system serves as the template for the required phage. We saw, that DNA-Polymerases can amplify the DNA segment, multiplying the amount of DNA in the cell-free reaction.<sup><a href="#phareferences">4</a></sup>
+</p>
+<p>
+  To assess this effect and its dependence on deoxynucleotide triphosphates (dNTPs), we performed an absolute quantification of T7 DNA in the cell-free reaction by quantitative PCR (qPCR). A standard curve with a serial dilution of T7 DNA. We used the TXTL qPCR protocol (add link).
+  We used two selected cell extracts (P15 and E10), which reached similar phage titers compared to the commercial cell extract  (myTXTL) in previous experiments.
+   We compared the replication potential in comparison to myTXTL.
+</p>
+<p>
+  The addition of dNTP to the reference reaction leads to an increase in DNA concentration by a factor of 15 in the reaction after 4 hours (290 ng compared to 19 ng). This is higher than in the myTXTL reaction without additional dNTPs, where a 1.8-fold increase in DNA (91 ng compared to 51 ng) after the 4-hour reaction is observed.
+ The home-made cell extracts P10 and E15 however do not resemble this behavior.
+</p>
+<p>
+It would be desirable to increase DNA amplification in our cell extracts. We therefore conducted a cause analysis, focusing on the T7 replication system. A more than 250-fold increase in processivity of the T7 DNA polymerase is achieved by its binding behavior to E. coli thioredoxin1. We suspected reduced presence of this factor in our cell extract. Thioredoxin could be added to a phage assembly reaction to further test these assumptions. However, our proteome analysis did not confirm that there were low levels of thioredoxin present in our cell extract.
+</p>
+    </div>
+    <div class="col-12 col-md-6">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/3/36/T--Munich--Results_WL2_Qpcr.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">DNA replication within cell extracts, E15 and P15 are self-prepared cell extracts, which reached similar phage titers compared to the commercial cell extract (myTXTL). ctrl = control without dNTPs. </figcaption>
+    </figure>
+    </div>
+    </div>
+<h2>
+Modular Bacteriophage Composition
+</h2>
+<div class="row" style="background-color: rgba(200,200,200,1);">
+<div class="col-12">
+<p>Bacteriophage modularity can be achieved by protein engineering without changing the genomic DNA of the bacteriophage and synthetic genome engineering.
+</p>
+</div>
+</div>
+<h3>
+Protein engineering
+</h3>
+<div class="row">
+<div class="col-12 col-md-6">
+    <figure class="figure">
+        <img src="https://static.igem.org/mediawiki/2018/d/d8/T--Munich--Results-His_YFP_HOC_front.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+        <figcaption class="figure-caption">His-YFP-HOC protein structure.</figcaption>
+        </figure>
+</div>
+<div class="col-12 col-md-6">
+<p>
+In the TXTL system, it should be possible to modify phage proteins without altering their genome. This was attempted by modifying HOC (highly immunogenic capsid protein), which is part of the capsid protein structure of the T4-phage. Therefore, His-TEV-YFP-HOC was separately expressed and the purified protein was applied to our phage assembly.<sup><a href="#phareferences">5</a></sup>
+</p>
+<p>
+  For protein modification of the T4 capsid protein HOC, a plasmid for protein expression was cloned and His-YFP-HOC (82kDa) was expressed. The plasmid was transformed into BL21, expressed and purified by nickel affinity chromatography and gel filtration.
+</p>
+</div>
+</div>
+    </div>
+    </div>
+    <div class="row mt-3">
+    <div class="col-12">
+    <div id="accordion">
+      <div class="card" style="background-color:#017FD4;">
+        <div class="card-header" id="headingOne">
+          <h5 class="mb-0">
+            <button class="btn btn-link collapsed" data-toggle="collapse" data-target="#collapseOne" aria-expanded="false" aria-controls="collapseOne">
+                <span class="pl-3" style="color: white;">Protein Purification</span>
+            </button>
+          </h5>
+        </div>
+      <div id="collapseOne" class="collapse" aria-labelledby="headingOne" data-parent="#accordion">
+          <div class="card-body bg-white">
+              <figure class="figure">
+        <img src="https://static.igem.org/mediawiki/2018/7/7c/T--Munich--Results_purifyHoc.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+        <figcaption class="figure-caption">Elution peaks of His-HOC-YFP from nickel chromatography (A) and gelfiltration (B) with corresponding 15% silverstained SDS-PAGE.</figcaption>
+          </figure>
+          </div>
+        </div>
+      </div>
+          </div>
+        </div>
+      </div>
+    <div class="row">
+    <div class="col-12">
+<p>
+After the two chromatography steps, the purified protein had a final concentration of 70µM and no by-products were visible by silver staining. The CD-spectra (minima of 218nm) of the protein corresponds to the model and the Ramachandran plot indicates that the protein was not denatured during purification. Then, the purified protein was intentionally denatured by thermal transition. Thereby, it was confirmed that the protein is stable below 40°C. This is of importance, as phage assembly is performed at 29°C.</p>
+  </div>
+    </div>
+    <div class="row mt-3">
+    <div class="col-12">
+    <div id="accordion">
+      <div class="card" style="background-color:#017FD4;">
+        <div class="card-header" id="headingTwo">
+          <h5 class="mb-0">
+            <button class="btn btn-link collapsed" data-toggle="collapse" data-target="#collapseTwo" aria-expanded="false" aria-controls="collapseTwo">
+                <span class="pl-3" style="color: white;">Protein Characterization</span>
+            </button>
+          </h5>
+        </div>
+      <div id="collapseTwo" class="collapse" aria-labelledby="headingTwo" data-parent="#accordion">
+          <div class="card-body bg-white">
+    <figure class="figure">
+        <img src="https://static.igem.org/mediawiki/2018/1/10/T--Munich--Results_CD_His_YFP_HOC.PNG" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+        <figcaption class="figure-caption">CD spectra of His-YFP-HOC with the specific minimum at 218 nm.</figcaption>
+        </figure>
+              <figure class="figure">
+        <img src="https://static.igem.org/mediawiki/2018/5/5f/T--Munich--Results_thermo%C3%BCbergang_His_YFP_HOC.PNG" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+        <figcaption class="figure-caption">Thermal transition of His-YFP-HOC in correlation with the absorbance.</figcaption>
+        </figure>
+          </div>
+          <div class="card-body bg-white">
+              <div class="col-12 col-md-6">
+          <figure class="figure">
+              <img src="https://static.igem.org/mediawiki/2018/9/96/T--Munich--Results_Ramachandran.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+              <figcaption class="figure-caption">Ramachandran plot based on the amino acid sequence.</figcaption>
+              </figure>
+              </div>
+              </div>
+        </div>
+      </div>
+          </div>
+        </div>
+      </div>
+<div class="row">
+    <div class="col-12 col-md-6">
+<p>The purified protein was added to the assembly mix. Bacteria were transfected with the modified phages. Unbound phages and protein were removed by centrifugation. Fluorescence was measured in dependence of the proximity to the bacteria. Theoretically, YFP intensity should correlate with the binding of YFP-HOC modified phages to the bacteria. </p>
+    </div>
+    <div class="col-12 col-md-3">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/f/f2/T--Munich--Results_wl3_sampleT4_XY122-01.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption"></figcaption>
+    </figure>
+    </div>
+    <div class="col-12 col-md-3">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/b/be/T--Munich--Results_Engineering_negativecontrol-2.png " class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption"></figcaption>
+    </figure>
+    </div>
+    </div>
+<div class="row">
+<div class="col-12 col-md-6">
+  </div>
+<div class="col-12 col-md-6">
+      <figcaption class="figure-caption">Bacteria infected without (left) and with (right) YFP modified phages </figcaption>
+</div>
+</div>
+<h3>
+Purification of the modified T4 bacteriophage
+</h3>
+<div class="row">
+<div class="col-12 col-md-6">
+<p>To show the possibility of our manufacturing system we modified our T4 bacteriophage at the Hoc protein with the fusion of a His-YFP. In this experiment the His-tag was utilized to purify the bacteriophage solution from the cell extract after the assembly process. </p>
+<p>The bacteriophages with the His-tag, were loaded on Ni-NTA beads which where embedded in chromatography columns. After four subsequently washing steps imidazole was used to elute the His-tag from the beads. As a negative control, bacteriophages without a His-tag were treated equally. </p>
+<p>To test the purification a spot assay was performed. On the left there are the T4 bacteriophages which were eluted from the sample with the His-Tagged bacteriophages and on the right side there is negative control with the native eluted bacteriophages. The titer of the bacteriophages is lower in the right sample, due to the fact that single plaques are visible, which indicates a low concentration. In contrast the His-tagged bacteriophages, which have a higher concentration, were only one large lysis area is visible. </p>
+</div>
+<div class="col-12 col-md-6">
+<figure class="figure">
+<img src="https://static.igem.org/mediawiki/2018/1/10/T--Munich--HisTag_spottest.jpeg" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+<figcaption class="figure-caption">Spot test of the engineered bacteriophages after His-tag purification, the left spot is the T4 phage, which is modified at the Hoc-Protein and the right spot is the negative control, where native T4 phages were used.</figcaption>
+</figure>
+</div>
+</div>
+<hr>
+<h3>
+Phage Genome Engineering
+</h3>
+    <div class="row">
+    <div class="col-12 col-md-6">
+<p>An additional advantage of Phactory is the possibility of rebooting bacteriophages from their genomic template, which is especially important for genetic engineering of bacteriophages. With home-made cell extract it was possible to manufacture an engineered MS2 RNA phage, where a polyhistidine-tag was added on the phage RNA polymerase. The genomic template was generated via gibson assembly and PCR amplification. After purification of the engineered genome, phages were assembled in our self-made P15 cell extract. A plaque assay confirmed the successful assembly of functional phages with a titer of 3 &times; 10<sup>7</sup> PFU/ml.</p>
+<p>To test the his-tag modification, the Phages were amplified in a bacterial culture flask. After lysis of the bacteria the tagged polymerase was purified from the supernatant by nickel affinity chromatography. An SDS-PAGE proved that the 62 kDa Protein remained in the Nickel column due to the successfully engineering of an inserted His-tag. </p>
+    </div>
+    <div class="col-12 col-md-6">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/5/52/T--Munich--MS2_gel_enge.jpeg" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure." height=”50%” width="50%" >
+    <figcaption class="figure-caption">SDS gel of the His-tag purified MS2 RNA dependent RNA polymerase</figcaption>
+    </figure>
+    </div>
+    </div>
+<h2>
+Quality Control
+</h2>
+<div class="row" style="background-color: rgba(200,200,200,1);">
+<div class="col-12">
+<p>
+Quality control covers several aspects of phage manufacturing including phage functionality, endoxin levels and DNA purity. We found that
+</p>
+</div>
+</div>
+<div class="row" style="background-color: rgba(200,200,200,1);">
+<div class="col-12">
+<ul style="">
+<li>we are able to produce functional phages in our cell extract</li>
+<li>the cell extract of our optimized strain has an endotoxin content below the detection limit and our regular self-produced cell extract has fewer endotoxins than the commercial cell extract</li>
+<li>next-generation sequencing allowed us to accurately quantify contamination</li>
+<li>phenol-chloroform extraction leads to a large amount of contaminating DNA which complicates phage assembly</li>
+<li>next-generation sequencing helped us to improve our purification protocols, leading to improved phage assembly</li>
 </ul>
 </div>
@@ Line 96: / Line 882: @@
-<script type="text/javascript" src="https://2018.igem.org/Template:Munich/PhactoryContentsJS?action=raw&amp;ctype=text/javascript"></script>
+<h3>
+Assessing Phage Functionality by Plaque Assays
+</h3>
+    <div class="row">
+    <div class="col-12">
+<p>We performed a Plaque Assay to determine the activity of the viable phages (titer) in our assembly batch. By creating serial dilutions, we were able to calculate a plaque forming units/milliliter (PFU/ml) value. The <a href="https://static.igem.org/mediawiki/2018/2/23/T--Munich--AgarOverlayPlaqueAssay_.pdf "> plaque assay protocol </a> was used.
+</p>
+    </div>
+    </div>
+ <div class="row">
+    <div class="col-12 col-md-12">
+  <figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/d/d0/T--Munich--Results_Wl3_T7_plaque.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption"> </figcaption>
+        </figure>
+    </div>
+    </div>
+ <div class="row">
+    <div class="col-12 col-md-12">
+  <figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/b/b5/T--Munich--Results_Wl3_MS2_plaque.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption"> Plaque Assay of manufactured T7 DNA -bacteriophage (top) and MS2 RNA-bacteriophage (bottom) in our self-produced cell extract P15</figcaption>
+        </figure>
+    </div>
+    </div>
+<!---
+<h5>
+Bacteriophages From Phactory Assemble And Are Fully Functional
+</h5>
+<div class="row">
+    <div class="col-12 col-md-6">
+<p>Discussion goes here
+</p>
+    </div>
+    <div class="col-12 col-md-6">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/7/7f/T--Munich--Results_QPCR_Nils.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">qpcr</figcaption>
+    </figure>
+    </div>
+  </div>
+<h5>
+RNA-Detection via RT-qPCR
+</h5>
+<div class="row">
+<div class="col-12">
+<p>
+To rapidly detect functionality of the phages, reverse transcription-quantitative PCR (RT-qPCR) was applied to pellets of T7-infected host cells at different timepoints. The RT-qPCR protocol was used. Using the delta-delta-Ct method3, relative expression was determined and normalized to the value at 3 minutes after addition of the phages. Whereas expression of E. coli genes remains stable, expression of three T7 genes is elevated throughout the experiment. The change of expression of all three phage genes reaches a first peak after 12 minutes and a second peak after 18 or 21 minutes.
+</p>
+    <p>
+        The sharp increase of phage gene expression in the first phase of the experiment displays the ability of the phages to successfully infect the bacteria and initiate reproduction. The second and even higher increase of expression is likely attributed to a second wave of infection of previously replicated phages. This indicates that the phages are capable of reproducing inside their host bacteria, resulting in multiplication of functional phages.
+The increase of expression of T7P01 is more pronounced than that of T7P07, which is in turn is stronger than that of T7P29. This circumstance is likely caused by differences in primer efficacy, a value describing the doubling rate in between every PCR cycle. For better reliability of the RT-qPCR quality control, primer efficacy should be assessed by creating a standard curve.
+</p>
+<p>All RNA samples were pooled and checked for DNA contamination, which could have interfered with the RT-qPCR. Absence of DNA was determined electrophoresis in a  gel electrophoresis</p>
+<br>
+<br>
 </div>
+</div>--->
+<h3>Assessing Endotoxin Levels</h3>
+<h5>Msb-B Knockouts Reduce Endotoxin Levels By 49-Fold</h5>
+    <div class="row">
+    <div class="col-12 col-md-6">
+<p>Endotoxins are pyrogens deriving from gram-negative bacteria. Their removal from any pharmaceutical product is mandatory. Therefore, we engineered an E. coli strain lacking lipid A, a major endotoxin component and used this bacterium to produce our cell extract. To evaluate endotoxin content of different cell extracts, a Limulus Amebocyte Lysate (LAL)-test was performed according to the <a href="https://www.genscript.com/product/documents?cat_no=L00350&catalogtype=Document-PROTOCOL">supplier manual</a>. As a reference, we compared the cell extract from our msbB-deficient strain (K2) to a cell extract from a wild-type strain (K4) as well as a commercial cell-free system (myTXTL, Arbor Biosciences). A solution with lysed <i>E. coli</i> served as a positive control.</p>
+<p>Compared to the K4 strain our msbB-deficient K2 cell extract had 49-fold reduced endotoxin levels (0.06 EU/ml compared to 2.94 EU/ml). Other cell extracts such as the P15 cell extract (3.83 EU/ml) and the commercial myTXTL (4.65 EU/ml) had even higher endotoxin contents.</p>
+    </div>
+    <div class="col-12 col-md-6">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/5/53/T--Munich--Results_Wl2_LAL.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">Endotoxin content in different cell-extracts determined by LAL-Test. Error bars indicate standard deviation of the measured plateau values. Error bars indicate SD</figcaption>
+    </figure>
+    </div>
+    </div>
+    <div class="row">
+    <div class="col-12">
+<p>A calibration curve using known endotoxin concentrations is required for the LAL-Test. A dilution series ranging from 0.625 EU/ml to 5 EU/ml. The fitting curve is used to interpolate the concentrations in the unknown sample. The linear fit of the calibration curve had a R2 of 0.98, an intersection with the y-axis at 0.38 and a slope of 0.39 ml/EU. These values are in accordance with the requirements of the LAL-Test manufacturer. </p>
+    </div>
+    </div>
+    <div class="row">
+    <div class="col-12">
+<p>Removal of endotoxins is impeded by their tendency to form stable interactions with other biomolecules. Our method of preventing the lipid A biosynthesis is therefore superior to extensive isolation steps required for removing endotoxins in conventional phage production. </p>
+    </div>
+    </div>
+<h3>
+Nanopore Sequencing Enhances DNA Purification
+</h3>
+<div class="row">
+  <div class="col-12 col-md-6">
+<p>Besides the cell extract, the DNA quality is the key to phage assembly. Impure DNA (Host DNA, proteins contamination) complicates the assembly of the phage within the cell lysate. A highly sensitive method to measure DNA is Oxford Nanopore sequencing.<sup><a href="#phareferences">6</a></sup>
+</p>
+<p>Our first attempts with classical chloroform/phenol extraction failed because of low molecular DNA (agarose gel). Therefore, we decided to search for other purification protocols, DNAse I and the Norgene kit (46800) tremendously increased DNA purity. With this DNA, we were able to achieve high titers by assembly.
+</p>
+    </div>
+    <div class="col-12 col-md-6">
+<figure class="figure">
+    <img src=" https://static.igem.org/mediawiki/2018/1/16/T--Munich--contamination_file_seq.jpeg" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption"> Illustration of DNA composition after purification, 3S phage DNA was purified from the <i>E. coli</i>  host by chloroform-phenol (CM) and column extraction with and without DNAse I treatment after cell lysis.</figcaption>
+    </figure>
+    </div>
+    </div>
+    <h3>
+    Sequ-Into Allows For Accurate Detection of DNA Contamination Levels
+    </h3>
+    <div class="row">
+    <div class="col-12">
+    <table class="table">
+    <p>
+        The laboratory team sequenced T7, 3S, NES and FFP bacteriophages genomes (preparation <a href="https://2018.igem.org/Team:Munich/Protocols">protocols)</a>.
+    </p>
+      <thead>
+        <tr>
+          <th scope="col">Experiment</th>
+          <th scope="col">Sequencing Time</th>
+          <th scope="col">Reads Sequenced</th>
+          <th scope="col">Base-pairs sequenced</th>
+        </tr>
+      </thead>
+      <tbody>
+        <tr>
+            <th scope="row">T7</th>
+            <td>12h 02min</td>
+            <td>424,198</td>
+            <td>1.27 &times; 10<sup>9</sup></td>
+        </tr>
+        <tr>
+            <th scope="row">3S</th>
+            <td>3h 42min</td>
+            <td>77,092</td>
+            <td>2.53 &times; 10<sup>8</sup></td>
+        </tr>
+        <tr>
+            <th scope="row">NES</th>
+            <td>3h 58min</td>
+            <td>39,501</td>
+            <td>2.31 &times; 10<sup>8</sup></td>
+        </tr>
+        <tr>
+            <th scope="row">NFFP</th>
+            <td>5h 42min</td>
+            <td>27,633</td>
+            <td>1.23 &times; 10<sup>8</sup></td>
+        </tr>
+      </tbody>
+    </table>
+    <p>
+        The main task after receiving genomes was to assemble the phage genomes from the Nanopore reads without the reference
+        genome and gain the origin sequence. There are several tools available but for minION Nanopore recommended tools are
+        "canu" and "miniasm" of which we used the latter.
+    </p>
+    <p>
+        Despite an excellent lab team, we have been confronted with a major problem: contamination. Contamination is a problem
+        regarding the therapeutic usage of the bacteriophages, but also an important factor in any bioinformatics pipeline
+        because contamination-based reads can confuse the assembly process. We thus developed <a href="https://2018.igem.org/Team:Munich/Software">Sequ-Into</a> to detect
+        the contamination and also get rid of contamination-originated reads. In the context of our project, several DNA
+        purification protocols were evaluated with Sequ-Into. This allowed iterative engineering cycles in Phactory, leading to
+        unparalleled purity of up to 96% (bases sequenced).
+    </p>
+    <p>
+        While evaluating the sequencing data with Sequ-Into, we noticed that in the first 10% of the sequencing time of
+        each experiment, more non-target reads were sequenced than in any latter time interval.
+        Moreover, we found that this also holds true for the first x sequenced reads, which allowed us to setup sequ-into such
+        that it only analyses the first 1000 reads of a minION sequencing experiment, speeding up computation and enabling
+        en-run analysis.
+    </p>
+    <div class="row">
+        <div class="col-12 col-md-6">
+          <figure class="figure">
+            <img src="https://static.igem.org/mediawiki/2018/c/c3/T--munich--time_timeline.png" class="figure-img img-fluid rounded">
+            <figcaption class="figure-caption">More non-target reads sequenced in the first 10% of the sequencing time of each experiment.</figcaption>
+              </figure>
+            </div>
+        <div class="col-12 col-md-6">
+            <figure class="figure">
+                <img src="https://static.igem.org/mediawiki/2018/4/44/T--munich--rank_timeline.png" class="figure-img img-fluid rounded">
+                <figcaption class="figure-caption">Equal Results are shown for the first x sequenced reads.</figcaption>
+                    </figure>
+        </div>
+    </div>
+    <p>
+        After getting rid of the contamination, we noticed a non-uniform coverage in the phage genome assemblies after
+        re-aligning the reads to the assembly.
+    </p><p>
+        Rearranging the middle part which initially was “over-expressed” and re-assembling led us to the expected uniform
+        coverage of the de-novo genome sequence after re-aligning the input reads.
+        Finally, we could predict coding-sequences and visualize all descriptive statistics in genome diagrams.
+    </p>
+    </div>
+    </div>
+    <div class="row">
+        <div class="col-12 col-md-4">
+     <figure class="figure">
+        <img src="https://static.igem.org/mediawiki/2018/6/6a/T--Munich--Results_3S_edit_phage.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+        <figcaption class="figure-caption">3S</figcaption>
+            </figure>
+    </div>
+        <div class="col-12 col-md-4">
+      <figure class="figure">
+        <img src="https://static.igem.org/mediawiki/2018/9/99/T--Munich--results_FFP_edit_phage.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+        <figcaption class="figure-caption">FFP</figcaption>
+          </figure>
+        </div>
+      <div class="col-12 col-md-4">
+      <figure class="figure">
+        <img src="https://static.igem.org/mediawiki/2018/8/80/T--Munich--Results_NES_phage.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+        <figcaption class="figure-caption">NES</figcaption>
+          </figure>
+        </div>
+        </div>
+    <div></div>
+    <p>More details at <a href="https://2018.igem.org/Team:Munich/Measurement">Data Analysis</a> page.</p>
+<h2>
+Encapsulation
+</h2>
+<div class="row" style="background-color: rgba(200,200,200,1);">
+<div class="col-12">
+<p>
+After successful bacteriophage production and toxicity evaluation the final step of the manufacturing pipeline is therapeutic application.
+By nature, bacteriophages possess a relatively short have-life when orally administered. Encapsulation in alginate negates this effect by protecting phages from gastric fluid. <sup><a href="#phareferences">7</a></sup>
+</p>
+<p>
+We constructed a simple <a href="https://2018.igem.org/Team:Munich/Hardware">device</a> that allows us to encapsulate our bacteriophages in alginate droplets.
+</p>
+</div>
+</div>
+<h3>Droplets are Monodisperse</h3>
+<div class="row">
+    <div class="col-12 col-md-4">
+ <figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/8/84/T--Munich--Results_brightfield_droplet2_hardware.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">Alginate composition of 1.8 % Alginate and 0.2 % low-viscosity Alginate delivers spherical Alginate microspheres.</figcaption>
+        </figure>
+</div>
+    <div class="col-12 col-md-4">
+  <figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/9/9c/T--Munich--Results_Droplets_zstack-400_8bit.gif" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">Alginate encapsulated phages, DNA stained with SYBR Gold.</figcaption>
+      </figure>
+    </div>
+  <div class="col-12 col-md-4">
+  <figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/c/c8/T--Munich--Results_brightfield_droplet_disperse_hardware.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">Monodisperse Alginate Droplets at 150X magnification.</figcaption>
+      </figure>
+    </div>
+    </div>
+<div class="row">
+    <div class="col-12 col-md-6">
+<p>
+  In order to achieve defined phage concentrations and therefore defined doses, we optimized the monodispersity of our alginate droplets.
+</p>
+<p>
+  In our initial attempts to create alginate droplets the size within a batch often varied significantly. Additionally, a lot of droplets were lost due to
+  aggregation. Optimization of parameters such as flow rate,
+  alginate concentration and N2 pressure led to an increase of monodispersity for all tested sizes (50-300 μm).
+  Specifically, an alginate concentration of 1.8 % alginate and 0.2 % low-viscosity alginate proved to be ideal. Pressure and flow rate determine the droplet sizes and can be varied.
+</p>
+    </div>
+    <div class="col-12 col-md-6">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/3/38/T--Munich--Results_droplet_optimization.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">Monodispersity of alginate droplets with three different diameters before and after optimization of the hardware device.</figcaption>
+    </figure>
+    </div>
+    </div>
+<hr>
+<h3>
+Bacteriophages Encapsulated In Alginate Can Withstand Gastric Acid
+</h3>
+<div class="row">
+    <div class="col-12 col-md-6">
+<p>The main problem of oral application is the acidic environment in the gastric fluid, necessitating protective measures against degradation. The other requirement of phage protection is the release of functional phages in the intestine. For this reason, we compared the behavior of the encapsulated phages and non-encapsulated phages in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF).
+</p>
+<p>
+In SGF, the number of active non-encapsulated phages decreases by more than 99.99 % within an hour. This shows the urgent need of a form of protection. As a reference, we used phages that were chemically released by citrate from alginate droplets.
+</p>
+    </div>
+    <div class="col-12 col-md-6">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/4/4f/T--Munich--Results_Joe_SGF_Phages.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">Non-encapsulated phages are highly degraded within an hour in simulated gastric fluid.</figcaption>
+    </figure>
+    </div>
+    </div>
+    <div class="row">
+    <div class="col-12 col-md-6">
+<p>
+In comparison, the encapsulated phages were tested in SGF for the same time as the non-encapsulated phages. Afterwards, the same droplets were exposed for two hours to simulated intestinal fluid to test the release of functional bacteriophages in this environment.
+</p>
+<p>The encapsulated phages were hardly released in a timeframe of one hour when exposed to SGF. After transferring the capsules to SIF the number of active phages reached that of the reference.
+ This indicates that the encapsulation of bacteriophages in alginate capsules enables the possibility of an oral application. Further experiments could test the alginate capsules in an animal model system.
+</p>
+    </div>
+    <div class="col-12 col-md-6">
+<figure class="figure">
+    <img src="https://static.igem.org/mediawiki/2018/a/a2/T--Munich--Results_Droplets_phages.png" class="figure-img img-fluid rounded" alt="A generic square placeholder image with rounded corners in a figure.">
+    <figcaption class="figure-caption">A small number of encapsulated phages are released in SGF. In SIF, functional phages are released in high concentration.</figcaption>
+    </figure>
+    </div>
+    </div>
+<!---
+    <div class="row">
+    <div class="col-12">
+<p>
+Phactory yields phages with toxicity levels that allow oral administration to the patient. However, oral delivery requires protection of the phages from rapid degradation in the acidic gastric juice, while direct intravenous application requires additional purification steps. To overcome these hurdles, we prototyped two 3D-printed fluidic devices that can be assembled for less than $5. For oral application, we built a nozzle to encapsulate the phages in monodisperse calcium-alginate microspheres protecting them in the stomach. The alginate solution, ejected from a dispenser needle with a syringe pump, was sheared off by a parallel stream of air. Our results show that after 1 hour incubation in simulated gastric fluid, active phages are successfully released in simulated intestinal fluid. For intravenous administration, we can purify the bacteriophages from the remaining cell-extract via fractionation in a pressure-driven size-exclusion filter system. Additionally, we built microfluidic hardware for our human practice project OraColi. </p>
+<p> - Alginat für lokale pH wert erhöhung im magen und auflösung in chelatoren(darm), da Ca2+ Ionen quervernetzen</p>
+<p> - Enkapsulierung durch Co-Flow System. Druckluft schert Tropfen von Spritzennadel ab, Düse == Hardware  Quervernetzung 1h in CaCl2 Lsg  Waschen  Verifikation durch Mikroskopie  Fertig für Einsatz (insg. Ca 1.5-2h)</p>
+<p>
+Experimente
+.	3D Modell von SYBR Gold gelabelten Phagen im Droplet durch z-Stack (BF/GFP)
+.	Darkfield Bilder von gelabelten Droplets (bild)
+.	Droplet Zusammensetzung (Viskosität zweier Alginate)
+.	Droplet Größen bei Flussrate und Druck
+.	Verhalten im Magen bzw. saurem Millieu (pH: 1) und Pepsin (1h @37°C, 10h @ RT) -> Phagen Degradation (barplot)
+.	Verhalten im Darm bzw. pH 7 und Pankreatin (2h @ 37°C) ->Phagen relase über Zeit (plot)
+</p>
+    </div>
+    </div>
+--->
+<hr>
+<div id="phareferences" class="row">
+<h2>References</h2>
+<div class="col-12">
+<ol>
+<li><a href="https://www.jove.com/video/50762/protocols-for-implementing-an-escherichia-coli-based-tx-tl-cell-free">  Sun, Zachary Z., et al. "Protocols for implementing an Escherichia coli based TXTL cell-free expression system for synthetic biology." Journal of visualized experiments: JoVE 79 (2013). </a></li>
+<li><a href="https://www.nature.com/articles/srep08663">  Kwon, Yong-Chan, and Michael C. Jewett. "High-throughput preparation methods of crude extract for robust cell-free protein synthesis." Scientific reports 5 (2015): 8663. </a></li>
+<li><a href="https://www.future-science.com/doi/abs/10.2144/0000113924">Shrestha, Prashanta, Troy Michael Holland, and Bradley Charles Bundy. "Streamlined extract preparation for Escherichia coli-based cell-free protein synthesis by sonication or bead vortex mixing." Biotechniques 53.3 (2012): 163-174.</a></li>
+<li><a href="http://www.pnas.org/content/84/14/4767"> Modrich, P., and C. C. Richardson. "Bacteriophage T7 deoxyribonucleic acid replication invitro. Bacteriophage T7 DNA polymerase: an an emzyme composed of phage-and host-specific subunits." Journal of Biological Chemistry 250.14 (1975): 5515-5522. </a></li>
+<li><a href="https://www.ncbi.nlm.nih.gov/pmc/articles/PMC1563720/"> Sathaliyawala, Taheri, et al. "Assembly of human immunodeficiency virus (HIV) antigens on bacteriophage T4: a novel in vitro approach to construct multicomponent HIV vaccines." Journal of virology 80.15 (2006): 7688-7698. </a></li>
+<li><a href="https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3804109/"> Maitra, Raj D., Jungsuk Kim, and William B. Dunbar. "Recent advances in nanopore sequencing." Electrophoresis 33.23 (2012): 3418-3428. </a></li>
+<li><a href="https://www.nature.com/articles/srep41441"> Colom, Joan, et al. "Microencapsulation with alginate/CaCO 3: A strategy for improved phage therapy." Scientific reports 7 (2017): 41441 </a></li>
+</ol>
+</div>
+</div>
+</main>
+</div>
+<script type="text/javascript" src="https://2018.igem.org/Template:Munich/PhactoryContentsJS?action=raw&amp;ctype=text/javascript"></script>
 </html>
 {{Munich/PhactoryFooter}}