Difference between revisions of "Team:Edinburgh OG/Human Practices"

Line 124: Line 124:
 
    
 
    
 
<p><strong>Dr&nbsp;Lorraine&nbsp;Kerr</strong> -&nbsp;Commercial Relations Manager at School of Biological Sciences, University of Edinburgh</p>
 
<p><strong>Dr&nbsp;Lorraine&nbsp;Kerr</strong> -&nbsp;Commercial Relations Manager at School of Biological Sciences, University of Edinburgh</p>
−
<p style="text-align: justify;">Dr Kerr was our principal touchpoint to contact stakeholders and experts in the bioplastic field. During the meeting we talked about our project, our objectives, approaches to work out our story and how to talk to stakeholders. She advised us to use the expert's experience and point of view to get more specific information, define targets and to set goals prior to interviewing.</p>
+
<p style="text-align: justify;">Dr. Kerr was our principal contact between stakeholders and experts in the bioplastic field. During meetings we discussed our project, objectives and approach to work out the story and how to talk to stakeholders. She advised us to use the expert's experience and point of view to get more specific information, define targets and to set goals prior to interviewing.</p>
 
    
 
    
 
     </blockquote>
 
     </blockquote>

Revision as of 11:39, 16 October 2018

PhagED: a molecular toolkit to re-sensitise ESKAPE pathogens

 

 

 

 

 

Integrated Human Practices

 

 

During the last lecture for the course Tools of Synthetic Biology the team explained to our classmates about the iGEM competition through an introduction of the iGEM history and principles. We also presented our idea of producing bioplastics from local materials with the purpose of delivering a sustainable process.

 

Feedback

Our classmates pointed out the importance of bioplastics and challenged us of to understand how synthetic biology could improve a process that has been done using biotechnology. They also suggested to look into the whisky industry or wastewater as potential raw materials. 

 

Dr Lorraine Kerr - Commercial Relations Manager at School of Biological Sciences, University of Edinburgh

Dr. Kerr was our principal contact between stakeholders and experts in the bioplastic field. During meetings we discussed our project, objectives and approach to work out the story and how to talk to stakeholders. She advised us to use the expert's experience and point of view to get more specific information, define targets and to set goals prior to interviewing.

 

Dr Adriag Higson - Director and Lead Consultant for Biobased Products, NNFFCC The Bioeconomy Consultants

Plastics are one of the most versatile materials that are immensely beneficial to our society (e.g. food packaging which helps in reducing food wastage). However, their life cycle creates a big challenge. The current proposals to counter this issue include recycling, reduce plastic consumption, and divert to bioplastics. Nonetheless, it is necessary to take into consideration the type of bioplastic and its life cycle. On top that, it is not recommended to consider bioplastics as carbon sink, instead we should look into the circular economy in which plastics is designed to be used for life and not single-use and that recycling is an appropriate option. The major barrier in bioplastic production is the economy of scale – the increase in innovation can only happen with the increase in production, however the current condition does not permit that due to low sales.

Assessing the sustainability

Dr Adrian Higson started by discussing the necessity of plastics and the problems of their current life cycle. We expressed our major concerns; the feedstock materials and the sustainability of the process, and in response we obtained a great insight from his experience. He commented that in terms of feedstock, the use of agriculture materials is simple not feasible. The use of side products however is more sustainable and by using them we are making a good choice of raw material. We need to look at the energy efficiency, water efficiency, and conversion process. The GHG emissions and water footprint are not the only impacts to look at, we have to consider the social and economic sustainability of the production.

We also discussed the possible end-of-life scenarios, according to him the recycling of the bioplastics and the final break of the polymer into monomers constitute a splendid way of tackling the waste problem. This also increases the chain value of the bioplastic as the monomers can be sold as chemicals for another industry.

Implementation

Dr Adrian Higson supported our idea of using by-products from other industry (whisky to be exact) due to its sustainability. However, he pointed the necessity of looking more in detail of the other impacts. After this conversation, followed by a team discussion and the advice of our supervisors we started to look into the incorporation of the Life Cycle Assessment model to look into the life cycle of our bioplastic.

 

After of our talks with experts and stakeholders we incorporated the LCA tool to measure the impacts of each aspect of our product life.

Life Cycle Assessment is a systematic way of quantifying the environmental sustainability of a product and helps to identify aspects for improvement. It is a vital tool for sustainability studies and if implemented correctly can act as the basis to evaluate different scenarios and facilitate decisions.

Implementations

The LCA resulted in an iterative tool that began as the repercussion of the dialogues with experts and ended as a decision making instrument. The LCA supported the idea of using the in-situ secretion system and showed us that the recycling scenario modelled for our process contributed to decrease the environmental impacts up to 70%. To read more about our LCA results please click here.

 

Dr. James Hallinan, Dr. Steve Thomas & Dr. James Brown,– Experts in Synthetic Biology and Material Sciences, Cambridge Consultants

They endorsed our project saying that PHAs represent an innovation example for delivering sustainable products through cutting edge technology. They also suggested us to focus on the properties, design and potential applications of PHAs instead of tackling the price of producing them. Furthermore, they brought to our attention to the manufacturing challenges of producing PHAs, which are the major hurdle preventing their wide scale adoption: the scalability.

Assessing Feedstock and Downstream Processing

We discussed the present obstacles in bioplastic production, according them feedstock resources and downstream processing are the key problems that must be addressed immediately. Feedstock is an environmentally sustainable way to sequester carbon source. The attractiveness of using underutilised products from industries as raw materials is that they are more budget friendly since they are usually under-priced, however, it needs to be built on an effective logistics strategy in terms of the usage as well as the consistency of the components in the by-product itself. The downstream processing is one of the biggest bottlenecks in the process, for this reason having a method for delivering the bioplastic without the necessity of disrupting the cells would increase the efficiency of the overall production and potentially can lead to the implementation of continuous-batch fermentation which could run for more hours and the carbon source and the product can be simultaneously added and removed, respectively.

Implementation and Impacts in our project

First, the use of whisky by-products as raw material is supported by the consistency of their elements. Second, the logistics of using them can be more achievable as they are the product of a local industry. The in-situ secretion system constitutes a potential method for reducing the use of hazardous chemicals in the process hence reduce the environmental impact of the PHBV production. The potential use of continuous-batch fermentation can contribute to the overall efficiency of the manufacture. The cost of the bioplastic production is not the most important factor, due to the necessity of shift from oil to bio-based raw material. We took their advice of looking more into the properties and we decided to only focus on PHBV production because PHBV is a PHA copolymer with a larger thermal processing window, thus less brittle than PHB.

 

We were invited to the  iGEM Northern Meet-up organised by the St Andrews iGEM team. This event was made for cooperation between teams as a space to share ideas, experiences and feedback for the projects. During the event we got feedback from professors and previews generations of iGEMers.

Implementation

They gave us advice of how to construct our narrative and to shape our objectives. Regarding the design of the process, they suggested to look into the use of fed-batch or continuous fermentation in order to increase the yield of PHBV. Furthermore, they also suggested alternatives for our in silico model.

 

Morag Garden - Head of Sustainability & Innovation, Scotch Whisky Association

Morag facilitated us lots of information about the local situation of the whisky market and their by-products. One of the most important, she highlighted the increasing global demand for Scotch and the now 128 distillers operating across Scotland's five different whisky region. In addition, she gave us suggestions for alternative community members looking at valorising the distillery materials, as they would be a useful source of data and information.  She also mentioned they are interested in the outcomes as the research progresses.

Some notes from the Whisky by-products study case

The whisky sector remains high with a growth rate estimated at 2.1% over the period to 2018. This would result in an approximate increase in by-products in the region of: Draff – 52,800 tonnes and Pot ale – 88,800 tonnes. By-products from Scotch Whisky distillery (draff and pot ale for example), have long been reused by the agriculture sector as a valuable animal feed and fertiliser for agricultural land (Figure 1). However, suitable routes will need to be found for these by-products as existing are near their natural capacity. New developments have recently opened up new markets for the use of by-products as feedstock for renewable heat or its use to make protein feed for salmon farming and biofuel. 

Figure 1 Availability of by-product feedstocks by local authorities in Scotland. Taken from Ricardo Energy & Environment for Zero Waste Scotland (2017). Biorefining Potential for Scotland. 

Figure 2. The current uses for whisky by-products in Scotland. Taken from Zero Waste Scotland (2015). Sector Study on Beer, Whisky and Fish. Final Report

A circular economy approach is to use resources more efficiently, keep resources in use for as long a time as possible and to minimise waste. Identifying opportunities to improve circular approaches, for example keeping by-product materials within Scotland for further processing. There are many potential products that could feasibly be made from by-products, adding further value to a business.

References

 

Through this visit, we learnt about the whisky production and collected whisky production by-products samples (i.e. pot ale and draff) to be used as carbon source in our experiments. 

We were introduced to the whisky production through the tour throughout the distillery. We learnt that the whisky industry managed their resources locally and sustainably and ensured that minimum waste is generated in every batch of the production. The information obtained was very helpful in conducting the Life Cycle Assessment.  

 
  
Figure 1 (from top to bottom) Tour guide explained about the kiln. Samples of malt before separated into husk, grist, and flour. Our team collected samples. 

 

Dr. Guo-Qiang Chen - Director of Center for Synthetic and Systems Biology, Tsinghua University and Chief Scientist at BLUEPHA

Jin Yin - Technique Manager at BLUEPHA

They endorsed our project saying that our work is conducive to the long-term development of the world. As global environmental awareness increases, the market for biodegradable plastics will certainly develop, which of course includes the PHA market and more research is needed to achieve this shift from plastics to bioplastics, especially in Europe where the composting action is encouraged by the government. PHAs certainly has this unique advantage over other bioplastics. 

Over the interviews with Jin Yin and Dr. Chen, we talked about the ways of solving the plastic pollution. In their point of view, one of them is promoting the use of bio-based plastics for containers and bags. However, they emphasised the necessity of research institutes and industry to work in the optimisation of the manufacturing processes and strain properties. For them, the bottlenecks in the PHA production are the strain properties, as the ability of using different raw materials, and the downstream process which is limiting the efficiency and purity of the product. As SynBio practitioners, they believe that the answer is in the use of this discipline to help solving these problems.

Bluepha Co., Ltd. is a synthetic biology and biomaterial company established in Beijing, China. The company was the first SynBio Startup Founded by iGEMers, and they were the winner of the Future Planet Award for Sustainable Growth. Moreover, they are pioneering a revolutionary cost-effective method for producing bioplastics.

Jin Yin and Dr. Chen:

“Over 20 companies from different countries are focusing on the optimisation of PHA production, all of us are trying hard on solving many practical problems and we truly believe that the answer of some of these problems is in the use of Synthetic Biology. However, it is also important to focus on the discovery of medical applications of PHAs. The biocompatibility of PHAs enclose the potential for using it as artificial cartilage and nerve conducts. For example, US has permit the usage of P(4HB) in surgery. They believe that PHAs is a new thing deserving further studies with surprising properties that can be a potential answer for diseases such like osteoporosis. Despite of the current drawbacks, we believe in a more optimistic future for PHAs“

 

Implementations

We confirmed that our in-situ secretion system is a good approach to tackle the downstream processing problem. As further directions, they recommended us to look for improvements to the strain for being able to use whisky by-products in a more efficient way. It is important to note however, that solving technical issues of PHA production is as important as it is related to the biomedical research. As a result, a new focus for our future research is to look into new biomedical applications of PHAs and specifically PHBV.

 

Paul Tan – Officer SINOPEC Guangzhou, China

Sinopec Guangzhou Petrochemical Company (“Guangzhou Company” for short) is one of the leading petrochemical enterprises in South China. The core business of Guangzhou Company covers refining products including solid plastics, such as polyethylene, polypropylene and polystyrene.

Jianfeng and Paul endorsed our project saying that they very welcome the technology development of bioplastic, even as a competitor to them. The mass convenience of plastic in food, clothes, car industry, etc. are too important and so far there is no other material that can replace plastic. Currently the degradation of plastic is still too expensive in price and environmentally. For that reason, bioplastics constitute a possible solution to the growing demand of plastics.

Understanding the recycling market of plastics

Jianfeng and Paul have experience in the petroleum based industry and knowledge of how the plastic market has been change. We were looking to understand the importance of different disposable scenarios and they gave us an insight of the recycling industry. They explained to us that after the reduction of oil prices in 2014, the recycle industry had a retreat because making new plastic became much cheaper than recycling it. In addition, they mentioned that recycled plastics are slightly different and the manufacturers need to add other materials to improve the physical properties. These additives tend not be in the labels of the plastics making the recycling process even more difficult in the further stage.

Implementations

The recycling scenario would not be the best end-of-life for our plastics. However, in conjugation with the comments of Dr. Higson from NNFCC we believe that a combination of recycling and composting could be helpful in terms of the sustainability of our bioplastics. The results of the research in PHBV degradation and composability should be incorporated to the design of PHBV products.

 

Paul Mines– CEO at Biome Technologies

“Plastics: wonder materials or existential threat”

Paul Mines began the lecture at The University of St Andrews by disclosing the issue of plastic pollution and the ubiquity of plastic due to its cheap and useful properties. Plastics have been around since 70 years ago, replacing other materials and expanding the plastic market. Then he continued talking on how bioplastic products can help to solve plastic pollution by offering plant-based and biodegradable alternatives to petroleum-derived plastics.

Understanding the impacts of the process

Regarding the carbon sequestration in bioplastics, the net carbon footprint is less and bioplastic can function as CO2 storage but it cannot help with the GHG problem in the world. Furthermore, he talked about the possible disposal scenarios such as composting anaerobic digestion and incineration. Finally, he ended his presentation by emphasising on what needs to be developed to achieve the wide use of bioplastic. Some of his examples were: Plant science, biomass production, pre-treatment of the biomass, monomer treatment, and tests and scale up. However, the market cannot go forward if the impacts of bioplastics products to the environment and society is not understood.

We learnt that ‘Human Practices’ aspect is crucial in every project design and not just iGEM. Through our Human Practices journey, we found LCA tool which assesses the environmental impacts of a product and/or process, which is in line with what Paul Mines mentioned.