Difference between revisions of "Team:Grenoble-Alpes/femca"

FMECA

• HUMAN PRACTICES
  • ACTORS & PARTNERSHIPS
  • ETHICS
  • EVENTS
  • SAFETY & SECURITY
    • SAFETY FORM
    • FMECA

Because regulations on biomedical devices are so drastic, we decided very early in the process that this competition would not be just about producing a “proof of concept” but to go a step further in analysing beforehand the risks that would go with our prototype use and that wouldn’t need to be considered for an eventual industrial production.
The FMECA (Failure Mode, effects, and criticality analysis) was originally developed by the National Aeronautics and Space Administration (NASA) to improve and verify the reliability of space program hardware. This method is a reliability evaluation/design technique which examines the potential failure modes within a system and its equipment, in order to determine the effects on equipment and system performance and on the environment of the device. Each potential failure mode is classified according to its impact on mission success and personnel/equipment safety.

For our study, we based ourselves on a MIL-STD report (US Military standards on Environmental Engineering Considerations and Laboratory Tests) explaining the process of a FMECA.
Here is a description of the different steps of the process:

1/ Definition of the system

This study will only address the failure modes coming from us (and the manipulations we made to build the prototype) and the environment (user, external aggressions…). We will consider that the parts we ordered are guaranteed to work under normal conditions (described in the datasheets of the components) and that their risks of failure are negligible.

To carry out this study, we had to approaches:

• THE EXTERNAL ANALYSIS: We first considered the system as a whole and we listed undesirable events that could happen to it so that we could prevent them.
• THE INTERNAL ANALYSIS: Then we separated the system in sub-modules and we analysed their functions and the undesirable events that could occur.

1.1/ External analysis

The system is an entirely automatized system capable of identifying a pathogenic bacterium and a resistance marker and giving a choice of an alternative to antibiotics: a selection of bacteriophages effective against this pathogenic bacterium.

We assume that this machine is going to be used in hospitals and medical analysis laboratory by technicians who were formed to the utilization of our machine. They will have to interact with the machine by introducing a sample from the patient in a consumable containing reagents (phages, probes, competent bacteria...) and by introducing it inside of the machine. He will also have to power the machine and to read the useful information on a screen. A result will be given by the machine after 12 hours and no other interaction with the user will be needed.

1.2/ Internal analysis

The machine is composed of 6 main modules:

• A fluorescence module capable of detecting the fluorescence emitted by a sample
• An extraction module capable of extracting the DNA of pathogenic bacteria
• A temperature control module capable of heating and cooling the different samples for the biological steps
• A pipetting module that dispenses liquids in the good tubes
• A power supply module to power every part of the machine

These modules manage biological components such as bacteria, bacteriophages or enzimes that were dried for a long-term conservation in the consumable.

2/ Block diagram

The block diagrams represent the main actions, interrelashionships and interdependancies of each entity that compose the system.For the external analysis, we will show the main interractions between the user, the samples and the modules that constitute the machine. However, for the internal analysis, we will show the main actions, interrelashionships and interdependancies of each constitutive part of the modules.

A good analysis will ease the process of identifying potential risks caused by the mere existance of this machine.

2.1/ External analysis

2.2/ Internal analysis

3/ List of failure modes

Once we have identified the main components of the system and the main actions that they perform, we can identify the potential failure modes by examining four modes:

• A premature failure (at time zero)
• A failure to operate at the proper time
• An intermittent operation (sporadically working)
• A loss of funtion (impaired)

4/ Evaluation

When the failure modes have been identified, it is also important to anticipate the effects that they are going to have on the environment or the user... And to rank them according to three criteria:

• Frenquency (F)
• Gravity (G)
• Detection (D)

5/ Identify solutions

6/ Summary

The three previous steps are summarized in the following tables.

5.1/ External analysis

5.2/ Internal analysis