Difference between revisions of "Team:Newcastle/Developments"

Line 60: Line 60:
 
         <div class="row about-desc" data-aos="fade-up">
 
         <div class="row about-desc" data-aos="fade-up">
 
             <div class="col-full">
 
             <div class="col-full">
−
                 <p class="about-para">Adding multiple sensors is a good way to collect a range of data for analysis purposes. Such as; Humidity, temperature, CO^2, PH level sensors. Which would allow for a greater control over the subject plant, in our case Arabidopsis. Which however would lead into a problem  with memory. Currently the system is run by a Arduino Uno which has Flash Memory 32 KB of which 0.5 KB used by, bootloader, SRAM 2 KB, EEPROM 1 KB. With the Lux sensor 80% of the flash memory is already taken. </p>
+
                 <p class="about-para">Adding multiple sensors is a good way to collect a range of data for analysis purposes. Such as; Humidity, temperature, CO<sub>2</sub>, PH level sensors. Which would allow for a greater control over the subject plant, in our case Arabidopsis. Which however would lead into a problem  with memory. Currently the system is run by a Arduino Uno which has Flash Memory 32 KB of which 0.5 KB used by, bootloader, SRAM 2 KB, EEPROM 1 KB. With the Lux sensor 80% of the flash memory is already taken. </p>
  
 
      
 
      

Revision as of 21:35, 17 October 2018

Alternative Roots/Developments

Alternative Roots

Future Developments

Sensors Data Storage

Sensors

Adding multiple sensors is a good way to collect a range of data for analysis purposes. Such as; Humidity, temperature, CO2, PH level sensors. Which would allow for a greater control over the subject plant, in our case Arabidopsis. Which however would lead into a problem with memory. Currently the system is run by a Arduino Uno which has Flash Memory 32 KB of which 0.5 KB used by, bootloader, SRAM 2 KB, EEPROM 1 KB. With the Lux sensor 80% of the flash memory is already taken.

Data Storage

In order to store data from the system the arduino needs a host shield. The ‘Mini Micro 3.3V’ would be suitable and there are plenty of forums online detailing the application of this device. [1]

With a memory stick attached, the system can record the data every hour. Later this can then downloaded onto a laptop and plotted showing if there are any fluctuations. Unfortunately this means we have to upgrade the Arduino model so we have enough memory to store the code for the extra sensors and the USB stick. There are a number of models that have more storage, Arduino Due has 512 KB flash memory and 96 KB SRAM. Which is more than enough for our project.


The engineers, hard at work trying to troubleshoot issues with the system.


The finished product, set to a rainbow function that cycles through various wavelengths of light





References & Attributions

Attributions: Luke Waller, Umar Farooq

1. Ardiuno, 23 Aug 2008; 'https://store.arduino.cc/arduino-pro-mini'