Difference between revisions of "Team:Nottingham/Lab"

Ideas

Immediately after meeting for the first time, we were tasked with finding a project that we would be working on over the summer. At first, the idea seemed daunting but before we knew it, amazing (sometimes outrageous) ideas were being suggested.

Almost a month later, after numerous presentations, we narrowed down our potential projects to five:

Ideonella sakaiensis

Ideonella sakaiensisis a bacterium that can degrade plastic (PET) using two enzymes. It was discovered outside a plastic recycling facility in Japan and subsequently isolated by research teams at Kyoto Institute of Technology and Keio University(Yoshida et al., 2016). The idea of being able to tackle the plastic crisis affecting the oceans and marine life was a particularly appealing one. However, we quickly realised that we didn’t know how to transform the organism and the time-scale for how long it would take. Also, our project was very similar to other research being conducted and so it would be difficult to come up with a novel way to address the crisis.

Water bottle biosensor

According to the House of Commons Environmental Audit Committee, in their first report of the season (2017-19), in the UK alone we use ‘13 billion plastic bottles every year’ and ‘only 7.5 billion are recycled’. This prompted the team to suggest a biosensor that detects harmful substance in plastic bottles. As a result, the average consumer would buy fewer plastic bottles and reuse their bottle. However, many solutions immediately were proposed that counteracted the need for the biosensor-this included the fact that many people buy permanent water bottles that they wash and reuse; it would be more cost effective to campaign recycling efforts than to market a biosensor and it is cheaper to just recycle a plastic bottle and buy a new one than to buy a biosensor. Indeed in the report by the Environmental Audit Committee (potential stakeholders), they suggest increasing the number of water fountains in open spaces and improving recycling through a number of methods including Deposit Return Schemes (which incentivise consumers).

Bdellovibrio bacteriovorus

Bdellovibrio bacteriovorus is a predatory bacterium that preys on other (Gram-negative) bacterial species (Rendulic et al., 2004). Its enzymes and their mechanisms are being studied in order to better understand the bacterium for future use as a possible therapeutic agent or as a method to penetrate biofilms (Kadouri and O'Toole, 2005; Sockett and Lambert, 2004). Our team was interested in engineering the bacterium to use it (and its enzymes) as a ‘pathogen eating machine’in food processes-for example targeting Clostridium botulinum, which releases the botulinum toxin. On top of it being an interesting species to work on, we had a leading expert on the Bdellovibrio species at our university. However, the main bacterium we were targeting (Clostridium botulinum) is a Gram-positive bacterium so is not recognised by Bdellovibrio. Also, it would take many weeks to engineer Bdellovibrio for single gene mutations, which is difficult to transform using random transposon mutagenesis. This was a project that required many years which our team did not have!

mRNA interference of Streptococcus mutans

Streptococcus mutansis one of a number of bacteria involved in tooth decay and is the most prevalent. According to Public Health England, in the UK, ‘almost a quarter (24.7%) of 5 year olds have tooth decay’ of which 3 or 4 teeth are affected. Dental health problems also have a heavy financial burden on the NHS-it spends around £3.4 billion per year on dental care. What makes S. mutans particularly hard to deal wit his its ability to form biofilms regulated by glucosyltransferases which catalyse sucrose to adhesive glucan. In particular, GtfB and GtfB seem to be the most important in biofilm production-mutations in the gtfB and gtfC genes disrupted microcolony formation on saliva coated surfaces(Koo et al., 2010). Our idea was to use a bacteriophage (a virus that only infects bacteria) to deliver micro RNAs or small interfering RNAs to silence those genes. One of our supervisors works with phage so she would be able to guide the wet lab team. We opted to silence the toxins rather than kill the bacteria because we wanted a way of preventing glucan formation without disturbing the balance of the oral microbiome

mRNA interference of Clostridium difficile

Clostridium difficile is an anaerobic bacterium capable of forming spores (meaning it persists in the environment). Clostridium difficil einfection(CDI) is a major infection which causes hospital and community acquired-diarrhoea. It particularly affects those who have long-term hospital stays (especially the elderly), are immunocompromised/immunodeficient (for example due to chemotherapy) and/or are on broad-spectrum antibiotics. CDI has a heavy financial burden-according to Zhang et al. (2017), the annual costs due to C. difficile infections in the US alone are an estimated $6.3 billion with almost 2.4 million days spent in hospitals. According to the Centers for Disease Control and Prevention, between 1999 and 2007 there was an increase in the estimated number of deaths due to CDI from 3,000 to 14,000 which was seen across Europe and Canada as well (McDonaldet al., 2012; Lessa et al., 2012). This has been linked to a hypervirulent, resistance strain of C. difficile.

Within the SBRC, our supervisors work with a wide range of Clostridial species in the Clostridia Research Group. Unlike with S. mutans, there was more experience within the team and so the supervisors would be able to work with us more closely and advise us on this project.

It was hard to decide between working with Ideonella sakaiensis, Streptococcus mutansor and C. difficile. But in the end, the team voted and chose mRNA interference of C. difficile which became our project; Clostridium dTox.

Project design

C. difficile & phage characterisation

C. difficile strain SBRC 078 was isolated previously in the SBRC from clinical faecal samples and belongs to the hypervirulent PCR ribotype 078. The strain contains the genes tcdA and tcdB encoding for both toxins. Phage phiSBRC was previously isolated in the SBRC from an environmental sample and can infect and form plaques on C. difficile SBRC 078. A lysogenic version of C. difficile SBRC 078, which contains phage phiSBRC integrated into the bacterial chromosome, was created previously in the SBRC.

C. difficile growth analysis

The growth profile of the wildtype version of C. difficile SBRC 078 was compared to the growth profile of the lysogenic version of this strain. To assess this the growth of both strains was monitored for 24 hours and the OD at 600 nm was measured and the maximum growth rate was calculated using the equation

where t1 is the OD at the start of exponential phase and t2 is the OD at the end of exponential phase. This data was used to inform the model parameters and was required to ensure that in the human gut the lysogenic bacterial strains created in this project would grow in the same manner as the wild-type cells and therefore would outcompete them.

Phage burst size

Phage burst size was assessed to determine the number of infectious phage particles produced per bacterial cell during one infection cycle. This was determined by measuring the number of infectious phage particles (in plaque forming units per ml) produced over a time-course after infection of C. difficile SBRC 078 with phiSBRC. The titre of free phage at each time point was determined by enumeration of plaques using a plaque assay. C. difficile SBRC 078 was infected to a multiplicity of infection (MOI) of 1. The burst size was calculated as the Final Phage Titre/(Infection Phage Titre – Titre of Unbound Phages). This data was used to inform the model parameters.

Promoter library

Our project aims to supress toxin production in C. difficile and we chose two different strategies to pursue this aim. Briefly, these strategies involve either dead-Cas9 (dCas9) or antisense RNA (asRNA) to inhibit toxin production. Both strategies will require a careful consideration of the genetic parts involved in the device. Of particular importance is the choice of promoter employed to control expression of the dCas9, guide RNA or antisense RNA. Tailoring expression to an appropriate level is often an important design consideration in genetic engineering. In our case it was thought that the use of a strong promoter would be of greatest benefit for both strategies we pursued in order to maximise either the amount of guide RNA and dCas9 or the amount asRNA. Concentration of these components within the cell was expected to correlate with the degree of toxin suppression and since the objective was to supress toxin to the greatest extent possible, we aimed to find and characterise strong promoters within C. difficile.

The promoters we chose to characterise were as follows:

All seven promoters were intended to be assessed in both E. coli and C. difficile. PCsp_fdx and PCac_thl were chosen since they have been used extensively in studies on C. difficile as well as related organisms and both are considered to be strong promoters (Heap, 2018, Heap et al., 2009). A comparison of the two suspected strong promoters was made with the native promoters controlling toxin expression in C. difficile PCdi_TcdA and PCdi¬_TcdB. It was thought to be interesting and potentially useful to discover the strength of the toxin promoters and potentially their variance in their expression in different conditions. Three existing iGEM registry promoters were also chosen to be assessed in C. difficile. This served two functions, firstly it improved the registry in terms of part characterisation as there is currently no data on their use in Gram-positive organisms. Secondly, since these promoters have been well documented in E. coli they could give a good indication of the strength of the Clostridial promoters when used in E. coli.

Occasionally cloning dCas9 in E. coli can be problematic, potentially due to unwanted off-target effects of the protein, the DNA binding nature of the enzyme or due to the size of the gene itself. To facilitate cloning and yet maximise dCas9 activity in C. difficile the ideal promoter would have low expression in E. coli and yet high expression in C. difficile. The choice of promoters and decision to assay them in both E. coli and C. difficile was designed to help us choose the optimal promoters for the toxin suppression projects, characterise existing iGEM registry parts in novel contexts and add potentially valuable Clostridial/Gram-positive promoters to the registry. Two different assays were chosen to assess the promoters described above. In E. coli, a GFP assay was chosen due to its widespread use, ease, cost, precision and reliability. However, GFP assays have not been successfully used in Clostridia, due to the requirement of oxygen for GFP, and as such other reporter assays are commonly used. One such reporter assay is the GusA assay in which the expression of the reporter gene gusA can be accurately measured via the eventual release of a fluorescent compound 4-methylumberlliferone (4-MU). The assay relies on the fact that the protein encoded by gusA is a glucuronidase which converts the non-fluorescent 4-methylumberlliferyl glucuronide (4-MUG) into the fluorescent (4-MU).

GusA assays can be performed in E. coli as well as Clostridia and so both GFP and GusA assays were used in E. coli. Our GFP assay was inspired by our InterLab experience as we thought it would be useful to use the protocols and calibration curves we obtained from the study to standardise our data. This would help us give context to the strength of the promoters by comparing them to the InterLab positive and negative controls, using the calibrations curves generated through our InterLab study to ensure that the results would be reproducible by any other laboratory using different equipment.

Heap, J. T. (2018). Stringency of Synthetic Promoter Sequences in Clostridium Revealed and Circumvented by Tuning Promoter Library Mutation Rates. https://doi.org/10.1021/acssynbio.7b00398

Heap, J. T., Pennington, O. J., Cartman, S. T., & Minton, N. P. (2009). A modular system for Clostridium shuttle plasmids. Journal of Microbiological Methods, 78(1), 79–85. https://doi.org/10.1016/j.mimet.2009.05.004

CRISPRi

Antisense RNA

Antisense RNA (asRNA) is another means of reducing gene function. In this strategy a piece of RNA is transcribed which is complementary to the coding strand of a target gene in the reverse orientation, in other words it is the antisense to it. This has the effect of sequestering the coding mRNA in an RNA-RNA duplex which is unable to effectively bind the ribosome meaning protein synthesis of that gene is inhibited. The RNA-RNA duplex molecule may also be targeted by RNases specific to double stranded RNAs meaning the target mRNA is degraded faster due to the presence of asRNA.

Many studies have utilised an asRNA approach to genetic studies. Typically asRNA will not be capable of completely eliminating gene function since target mRNAs may not encounter the asRNA molecule within the cell before being translated. For this reason, asRNA has primarily been used when gene ‘knockdowns’ are desired rather than total gene knockouts. In knockdown strains the expression of the target gene is reduced rather than entirely eliminated. Non-model organisms which are less genetically accessible frequently do not have established methods for creating gene knockouts. In this case asRNA is often used to gain initial insights into gene function since all that is required for asRNA studies is knowledge of the target gene sequence, a plasmid capable of replication in the organism and a means of transformation.

Our project aims to create a phage which will suppress toxin production in C. difficile once integrated into its genome. To do this we will genetically modify a phage known to infect strains of C. difficile named phiSBRC. The phage will be modified to include constructs to suppress toxin production either via a CRISPRi (dead-Cas9) approach or via asRNA. There were several design considerations when approaching this problem. Firstly the construct should be capable of significantly suppressing toxin production, it was not known whether dead-Cas9 or asRNA would be superior in this respect. Secondly, the eventual genetic construct we choose should be sufficiently small that we can alter the phage genome without adversely affecting its normal function. One potential limitation was thought to be the total amount of DNA which the phage could package into its head. In this respect asRNA could have a significant advantage over a dead-Cas9 approach since the total size of the genetic construct can be much smaller. Antisense RNA constructs can simply consist of a promoter and a short asRNA region of less than 100bp while the cas9 gene alone is more than 4kb long. However, since it was not known which approach would produce more effective toxin suppression both approaches were pursued.

C. difficile has two well characterised toxins which cause epithelial cells to undergo apoptosis these are TcdA and TcdB. It was thought that each construct we create should aim to supress both of these toxins simultaneously since research has concluded that each can operate independently from the other (Kuehne et al., 2010). The general form of our constructs therefore is to have asRNA parts downstream of promoters with a transcriptional terminator between these promoter-asRNA pairs. It was thought to use two different promoters to as to avoid unwanted recombination events within our constructs. As discussed previously, the optimal promoter for expressing the asRNA parts was thought to be the strongest promoter possible. We were therefore looking for the two strongest promoters in C. difficile we could find. Our results from the promoter assays we performed indicate that PCsp_fdx¬ is the strongest promoter assayed in C. difficile. Unfortunately we were unable to clone the GusA reporter plasmid for PCac_thl which was the other Clostridial promoter expected to give strong expression. However, the PCac_thl GFP reporter plasmid was created and assayed in E. coli where it gave the highest expression of any promoter tested including the positive control used in the iGEM InterLab studies. This result was consistent in our laboratory as well as that of our two collaborating teams representing Imperial College London and University of Warwick. The Clostridial promoter P¬Cac_thl has been routinely used in Clostridial research and outperforms every other promoter in E. coli, therefore it can be hypothesised that P¬Cac_thl would exhibit the strongest levels of expression in the GusA promoter assay in C. difficile, had this plasmid been constructed. As such PCac_thl and PCsp_fdx were chosen as the two strong promoters from which to express our asRNA parts.

When choosing the length of the antisense RNA we consulted the scientific literature. There is some contradicting advice on this topic with E. coli asRNA parts seeming to be significantly shorter than those used in the few asRNA studies we found performed in clostridia. There are important design considerations here since there is a compromise to be made. Longer asRNA parts seem to generally give a greater degree of suppression but are also more likely to give unwanted off-target effects. This is probably because they can bind the target mRNA more tightly but are also more likely to have regions of short similarity with other non-target mRNAs within the cell. With this in mind we chose to try two different lengths of asRNA binding to the coding region of the target gene as well as the entire region upstream of the gene expected to include the ribosome binding site. ‘Construct One’ has a binding region of 24bp, this is the length suggested by a recent review paper on this topic (Hoynes-O’Connor & Moon, 2016). ‘Construct Two’ has a binding region of 50bp, this is much longer though still significantly shorter than the hundreds of base pairs previously used in clostridial studies (Desai & Papoutsakis, 1999; Fagan & Fairweather, 2011). Both of these constructs target both of the toxin genes we are interested in.

Construct One diagram

Construct two diagram

Desai, R. P., & Papoutsakis, E. T. (1999). Antisense RNA strategies for metabolic engineering of Clostridium acetobutylicum. Applied and Environmental Microbiology, 65(3), 936–945.

Fagan, R. P., & Fairweather, N. F. (2011). Clostridium difficile has two parallel and essential sec secretion systems. Journal of Biological Chemistry, 286(31), 27483–27493. https://doi.org/10.1074/jbc.M111.263889

Hoynes-O’Connor, A., & Moon, T. S. (2016). Development of Design Rules for Reliable Antisense RNA Behavior in E. coli. ACS Synthetic Biology, 5(12), 1441–1454. https://doi.org/10.1021/acssynbio.6b00036

Kuehne, S. A., Cartman, S. T., Heap, J. T., Kelly, M. L., Cockayne, A., & Minton, N. P. (2010). The role of toxin A and toxin B in Clostridium difficile infection. Nature, 467(7316), 711–713. https://doi.org/10.1038/nature09397

Results

C. difficile & phage characterisation

C. difficile growth analysis

The growth of wild-type C. difficile SBRC 078 was compared with the growth of the lysogenic version of this strain. By measuring the OD at 600 nm of the two bacterial cultures over a 24-hour period. It was determined that the lysogenic strain has a slightly longer lag phase than the wild-type strain (Figure 1) but both strains reached the same maximum OD. The maximum growth rates for the two strains were similar with wild-type reporting a maximum growth rate of 0.26 µ/h and the lysogen measuring 0.23 µ/h. The negative control (broth containing no bacteria) reported a maximum growth rate of 0.007 µ/h showing no contamination over the time-period. The similar growth rates of the wild-type strain and lysogen showed that when lysogens were created in the gut as part of the therapy, the lysogens would be able to maintain their population over time in the same way as wild-type strains, therefore ensuring they are able to compete for nutrients and act as a probiotic to reduce colonisation of incoming toxigenic C. difficile strains.

Phage burst size

The phage burst size was calculated to determine the number of infectious phage particles produced from one bacterial cell during one infection cycle. A culture of C. difficile SBRC 078 was infected with phiSBRC to a MOI of 1 (infection titre of phage of 1.38 x 106 pfu/ml) and incubated for 15 minutes to allow phages to adsorb. The culture was washed of any unbound phages and then incubated under anaerobic conditions for 80 minutes. The number of phages in the supernatant was monitored. Figure 2 shows the number of phages present at various intervals over the period. It was observed that between 65 and 70 minutes and then 75 and 80 minutes the phage titre seemed to plateau slightly, indicating the end of the first burst cycle. It was determined by plaque assay that the final phage titre at the end of the first burst cycle was 4.2 x 106 pfu/ml and the number of unbound phages after the 15-minute incubation was 1.05 x 104 pfu/ml. These values were used to calculate burst size which was determined as 33 phage particles per cell. The burst size was a useful parameter for the phage model and allowed the number of phages over time in the model to be more accurately determined.

Promoter library

CRISPRi

Antisense RNA

The ultimate objective was to incorporate the described asRNA system suppressing two C. difficile toxins into the phiSBRC prophage of C. difficile. The edited prophage could then be prepared from a stock C. difficile culture and used as a phage therapy treatment on patients suffering from C. difficile infections. To first demonstrate the efficacy of the asRNA constructs at suppressing toxin production the two constructs we created were cloned into a plasmid vector suitable for transforming C. difficile. The C. difficile cultures harbouring asRNA plasmids were compared to wild type C. difficile in terms of supernatant cytotoxicity using African green monkey kidney epithelial cells of the ‘Vero’ lineage. C. difficile cultures were monitored over five days in terms of optical density as a read-out for bacterial growth and samples were taken, centrifuged and the supernatant filter sterilised in preparation for the cytotoxicity assay.

Cell supernatants of C. difficile contain the two toxins of interest TcdA and TcdB which are capable of stimulating mammalian epithelial cells to undergo apoptosis. It was thought that the supernatants from cultures containing our two asRNA constructs would have a lower concentration of toxins and therefore produce lower cytotoxic effects on the vero cells. Vero cells were grown in a 96-well cell culture plate using Dulbecco’s modification of Eagle medium (DMEM) supplemented with 10% heat-inactivated fetal bovine serum (FBS). After a confluent monolayer of epithelial cells was formed the sterile C. difficile supernatant was applied and the cells incubated for 24 hours at 37°C with 5% CO2. After incubation the medium-supernatant solution was taken and added to the LDH master mix solution, incubated in the dark at room temperature for 30 minutes before the absorbance at 492 nm was measured. Absorbance at 492 nm is a readout for cell death due to the released lactate dehydrogenase from lysed cells reducing NAD+ to NADH/H+ which is then used to reduce a tetrazolium salt into formazan. The formazan dye produced gives an absorption maximum at 492 nm and since the concentration of formazan correlates with the amount of lactate dehydrogenase released by the cells it can be used as a measurement of cytotoxicity.

Our results show that the supernatant toxicity of wild type C. difficile appears to plateau at 48 hours with no further increases observed. This plateau effect is likely produced by the concentration of toxin in the supernatant overcoming a threshold whereby the assay is no longer sensitive to any increases in toxicity. Both asRNA construct containing cultures take around 120 hours to reach this plateau of toxicity as their rate of toxin production is significantly lower. The rate of toxin production was taken as the OD-normalised LDH assay 492 nm absorbance value divided by the number of hours that the sample had been growing. Using this formula the wild type culture exhibited a toxin production rate of 0.0506 arbitrary units whilst construct one and two produced 0.0102 and 0.0074 respectively. Comparing these rates reveals that the asRNA construct one reduces the toxin production rate by 79.8% and construct two reduces the toxin production rate by 85.3%.

Figure legend.

Figure legend.

Conclusion

Our project aimed to show that C. difficile toxin production could be reduced with genetic constructs which could then be incorporated into a phage which targets strains of C. difficile.

The first step toward this end was to characterise a recently discovered phage in terms of its infectivity parameters. Phage phiSBRC was demonstrated to infect the C. difficile SBRC 078 strain effectively with the plaque/burst size assay showing that 33 phage particles are released per C. difficile cell. This result was used as a parameter in our modelling work. Another important parameter needed for the model was the growth rate of C. difficile wild type compared with the C. difficile lysogen in which the phiSBRC phage has integrated into the C. difficile genome. The respective growth rates were calculated by tracking the growth of each culture. It was concluded that there was little difference in the growth rate between C. difficile and the lysogen.

Having demonstrated that phiSBRC would be a suitable phage for infecting toxic C. difficile we next wanted to design a genetic construct which would be capable of suppressing toxin production. The two approaches we considered for this were dCas9 and asRNA. Both of these approaches required the use of strong, constitutive promoters. For this reason the next step for us was to characterise a range of promoters for strength in C. difficile. Whilst achieving this goal we also decided it would be beneficial to attempt to improve the characterisation of existing registry parts by measuring their expression in a novel organism. C. difficile is a Gram-positive anaerobic organism with significant differences to the E. coli chassis for which existing characterisation was performed. The existing registry promoters BBa_J23114, BBa_J23106, and BBa_J23119 were characterised for expression strength using a GusA assay in C. difficile. A new registry part which represents the ribosome binding region from the thiolase gene of Clostridium acetobutylicum was added to these promoter regions allowing them to be characterised in the context of having a different RBS than previously. In addition, four promoters have been added to the iGEM registry from C. acetobutylicum (Pcac_thl) [Bba_K2715010], C. sporogenes (PCsp_fdx) [Bba_K2715011] and two from C. difficile (PCdi_TcdA) [Bba_K2715012] and (PCdi_TcdB) [Bba_K2715013].

The four novel registry parts were characterised alongside the existing registry promoters in a GFP assay in E. coli as well as in a GusA assay in C. difficile. The most remarkable conclusion from the E. coli GFP assay of these promoters is that both of the suspected strong C. difficile promoter PCsp_fdx and Pcac_thl were stronger than any of the three existing registry promoters we assayed; with Pcac_thl producing around three times the concentration of fluorescein (0.3235µM) as the positive control used in the InterLab studies (0.0958µM).

Our main objective in characterising these promoters was to find a suitable pair of strong promoters to use in our subsequent dCas9 or asRNA projects. For this the GusA assay within C. difficile was most relevant since this is the chassis in which these constructs would be acting. The C. difficile GusA assay clearly showed that none of the three existing registry promoters from E. coli had any detectable activity in C. difficile. By far the strongest promoter we were able to measure was PCsp_fdx which was around 7.5 times stronger than the next strongest promoter we found (PCdi_TcdA). We were unable to clone the strongest promoter from the E. coli GFP assay PCdi_thl into a GusA reporter plasmid. This is likely because of the toxicity of the gusA gene in E. coli and since we know that PCdi_thl is the strongest of our promoters in E. coli it is unsurprising that this was the most problematic plasmid to construct. As a result we did not measure the strength of PCdi_thl in C. difficile, but due to its measured strength in C. difficile as well as its widespread use for overexpression studies in Clostridia we decided to select it alongside PCsp_fdx as a promoter to use in the next stage of our project.

Two asRNA constructs were cloned named ‘asRNA Construct One’ [Bba_K2715007] and ‘asRNA Construct Two’ [Bba_K2715008]. Both of these constructs target both toxin genes TcdA and TcdB with asRNA parts of varying length with asRNA Construct Two having longer regions of homology with 50bp of coding region verses 24bp for asRNA Construct One. These constructs were designed with the promoter results in mind, selecting the suspected two strongest promoters in C. difficile. Both constructs were assessed in terms of their ability to reduce C. difficile culture supernatant cytotoxicity on mammalian ‘Vero’ cells. The rate of toxin production was decreased by 80% and 85% by asRNA Construct One and asRNA Construct Two respectively. The main conclusion to draw from this result is that an asRNA strategy is viable for reducing C. difficile strain toxicity. Another conclusion of note is that having a longer region of homology with the target gene does seem to impact on the effectiveness of suppression significantly since asRNA Construct Two has a 5% greater effect whilst having 26bp extra of homology per toxin gene.

The other approach to suppressing toxin production was via a nucleolytically inactive Cas9 (dCas9). Demonstration of this approach did not progress as far as with asRNA because the cloning stage of this project was more time-consuming. While asRNA demonstrated a C. difficile supernatant with reduced cytotoxicity, our dCas9 approach was only validated in E. coli. However, positive results were obtained and future work should continue to pursue this approach. Six guide RNAs were evaluated in terms of their ability to target dCas9 to the toxin promoter region for toxin A (PtcdA). PtcdA was placed in control of the reporter gene gusA allowing quantification of the effectiveness of each guide RNA. Out of the six guide RNAs tested guide RNA 6 displayed the most consistently promising results with significantly less Gus activity implying that this guide recruits dCas9 to the PtcdA promoter region most effectively. Therefore guide RNA 6 will be used in future work when the dCas9 approach is trialled within C. difficile for its ability to reduce toxin production.

Future Work

Since we have demonstrated the effectiveness of asRNA at reducing C. difficile toxicity in this project, the obvious next step is to integrate our toxin suppressing construct into phiSBRC. This will involve taking the C. difficile lysogen with phiSBRC integrated into the genome and modifying it in the same way as we would modify the C. difficile genome normally. A recent paper (Wang et al., 2018) has described genome modification of C. difficile using Cas9 as a counter-selection mechanism forcing the cell to undergo homologous recombination with the delivered knockout plasmid to escape the lethal effects of Cas9. The recombination event which allows the cell to avoid the lethal double stranded break caused by Cas9 is directed by homology arms delivered on the knockout plasmid allowing researchers to delete genomic regions or introduce novel DNA into the genome. With this approach in mind we designed the plasmid pSBRC_Cas9_PhageIntegration_holin. This plasmid contains asRNA Construct Two which reduced toxin production by 85%, between homology arms directed at a gene within the phiSBRC prophage. The phiSBRC gene we chose to target was a holin gene which is thought to be responsible for cell lysis. Without this gene the progeny phage particles will not be able to burst out of the bacterial cell. This gene was chosen because it is one of the few areas of the genome which we are confident in ascribing function to and that function is not required to prepare more of the modified phage. Even without the phage being able to exit the bacterial cell it can still be induced and replicate itself and from there we can artificially extract phage particles ready for re-infection or delivery as a therapeutic. The other reason the holin gene was chosen is because of concerns around the size of phage genome which can be successfully packaged. It may be that the phage has evolved to be at or near to the limit of DNA which it can package. In this case replacing the holin gene which is of a similar size to asRNA Construct Two would mean that this is no longer an issue.

After knocking out the holin gene whilst simultaneously introducing asRNA Construct Two we would have a lysogenic strain of C. difficile with the modified phiSBRC integrated within the C. difficile genome. The asRNA Construct Two should still be active within the genome and have a similar toxin suppressing effect to that demonstrated on a replicative plasmid in our results section. The cytotoxicity assays performed earlier will have to be repeated with the modified phiSBRC prophage taking the place of the replicative vector to ensure that the toxin suppression effect remains. It may be the case that since the asRNA construct on the genome is at a lower copy number than on a replicative vector it no longer displays such powerful toxin suppressing effects.

Having verified that the modified phiSBRC prophage retains its impact on toxin suppression the next stage would be to generate a second modified phiSBRC prophage which does not remove the phage holin gene. This is neccessary because the modelling results suggest that having the phage able to occasionally enter the lytic cycle would be beneficial when put into practice. Instead of targeting the holin gene a region of non-coding DNA would be found and targeted with different homology arms to those used previously in pSBRC_Cas9_PhageIntegration_holin. Once the new modified prophage is created it would be neccessary to ensure that the phage retains its ability to infect C. difficile and undergo the lytic cycle. For this reason a plaque assay would be performed as previously with the wild type phiSBRC and any difference in phage parameters would be re-entered to the mathematical model.

After this research is complete we would have a C. difficile lysogen containing a modified prophage which has been demonstrated to suppress toxin. This lysogen could be used to generate pure bacteriphage particles which could be used in phage therapy. The next factor to consider would be the means of delivery to patients. After consulting with experts and discussion groups as detailed in the human practices it was decided that a capsule would be the optimal delivery method. As such the final stage of research in future work would be optimisation of the encapsulation of bacteriophage particles ready for application to patients.

Wang, S. et al. 2018. “Genome Engineering of Clostridium Difficile Using the CRISPR-Cas9 System.” Clinical Microbiology and Infection. https://doi.org/10.1016/j.cmi.2018.03.026.

InterLab

The aim of the iGEM interlab study is to work towards a more reliable and repeatable measurement system to make synthetic biology an engineering biology. All participating laboratories first calibrated their instruments by obtaining standard curves using sodium fluorescein which was provided in our kits. This allowed us to fix settings such as top/bottom optic, gain and type of plate used so that all conditions were the same for our GFP and CFU protocols.

(Blue cells were raw data measurements, gold cells were calculated) After the machine was calibrated fluorescence and absorbance of GFP in 8 different devices was measured using the standardised method provided by iGEM. The results gathered were suggestive of which device had the highest strength of gene expression. The data collection sheet provided converted our raw plate reader measurements into arbitrary fluorescein and abs600 values as well as calculating the µM fluorescein per OD as shown in the following tables.

What did we gain from our interlab experience? The interlab study has allowed us to contribute to making synthetic biology more accurate through providing a series of standardised procedures of calibration and measurement tests. It helped our project as we were then able to use our new calibrated programmes to compare our promoters GFP assay data with iGEM standard data.

Labfolder

Protocols

Lab book antisense RNA experiments

Lab book promoter experiments