Difference between revisions of "Safety"
| Line 239: | Line 239: | ||
<div class="column full_size"> | <div class="column full_size"> | ||
| − | <h2> Safety | + | <h2> Safety Forms </h2> |
<p>These forms are for you to tell us all about your project, the organisms/parts you are using, the potential risks of your project, and what you are doing to reduce those risks.</p> | <p>These forms are for you to tell us all about your project, the organisms/parts you are using, the potential risks of your project, and what you are doing to reduce those risks.</p> | ||
Revision as of 19:45, 18 December 2017
Safety and Security
Welcome to the 2018 Safety and Security Hub!
Below you will learn about Safety and Security as it pertains to the iGEM competition. We expect all team members and instructors to review this information carefully prior to starting your iGEM project.
For more about Safety & Security at iGEM visit us here.
We expect everyone involved with iGEM to act responsibly in the lab. Please read our Responsibility and Safety Committee page for more information on how we define Responsibility and for information on the iGEM Safety Committee.
Safety in iGEM: A message from Piers Millet, iGEM Director of Safety and Security.
General Safety Information
Have you found all 12 hazards in the image?
What is Safety?
In iGEM, we have clear expectations for teams when it comes to safety. Please read our What is Safety page for complete details about Safe Project Design, Safe Laboratory Work, and Safe Shipment Practices.
The FBI, a proud sponsor of iGEM since 2009, hosts an annual 'Safeguarding Science and the Future' workshop at the Giant Jamboree
Safety Policies
iGEM projects are at the forefront of what is technologically possible, and encounter important policy issues on a continual basis. In 2018 iGEM has clarified its positions on gene drives, antimicrobial resistance, use of animals, parts from risk group 4 organisms and deletions as modifications.
Exemplary Projects
Over the years, we have seen many iGEM teams take safety and security seriously in their work. Explore how teams have approached safety in their work.
Help
If you have any questions or problems about safety, please reach out to us, we're here to help you! Email safety AT igem DOT org at any time with any questions you might have! We are friendly and available, and we will do our best to answer your questions quickly. Any team member can ask a question, whether you are a student, a leader, or an advisor. Your team will never be penalized for asking us a question, so please ask us anything about safety and your project.
Guidelines
General rules and advice for working in and outside the lab. These resources can help you understand some of iGEM's policies and rules.
Risk Groups
iGEM teams should use BL1 or BL2 organisms. Teams are not allowed to work with BL3 or BL4 organisms. For more information about Risk Groups, click here.
White List
The White List is a list of allowed organisms that teams can use in iGEM, along with organisms that require teams to contact HQ. For the full list, please click here.
Do Not Release
iGEM teams should not release any genetically modified organisms outside the lab. For more details, please click here.
Ask your Instructors!
Your first resource is always your instructors, advisors, and professors. They have experience working in their own lab facilities, and they know how to work with your university to ensure lab safety. Other local resources include:
- The laboratory manager for the lab where you work
- The safety office or Biosafety Committee at your university/institution
- Members of your local or national government
iGEM's Lab Safety Rules
- Teams must provide information 'About our Project', 'About our Lab' in the Safety Form, complete a Check-In Form when using parts and organisms not on the White List , and have your Instructor or Primary Contact sign off your Safety information. All deadlines for providing this information must be met.
- Teams must be in full compliance with iGEM's safety policies.
- Teams must work in the biosafety level appropriate for their project. If your project involves organisms and parts that can used safely in a BSL1 lab, you should not work at higher containment levels. If this is not possible an explanation must be provided in the information 'About our Lab' section of the Safety Form
- Teams must follow iGEM shipment requirements when submitting samples
- Teams must follow all biosafety rules of their institution and all biosafety laws of their country
- Teams cannot conduct work with Risk Group 3 or 4 organisms
- Teams cannot conduct research in a Safety Level 3 or 4 laboratory
- Teams cannot conduct work with parts from a Risk Group 4 organism
- Teams cannot release or deploy their project outside of the laboratory at any time during the competition or at the Giant Jamboree
- If you conduct any experiment with human subjects (including non-invasive experiments, such as surveys), you must comply with all rules of your institution/country that govern experiments with human subjects.
NOTE
Failure to meet any of these requirements can lead to immediate disqualification from the competition and referral to the Responsible Conduct Committee.
Safety Forms
These forms are for you to tell us all about your project, the organisms/parts you are using, the potential risks of your project, and what you are doing to reduce those risks.
There are two forms that you can fill: The Check-In form, and the Final Safety Form. Any team that plans to acquire or use any organism/part that is NOT on the White List must submit a Check-In form.
All teams are required to fill the Final Safety Form.
- We encourage STUDENTS, instead of instructors, to complete these forms.
- Safety forms become available for editing early in the season. We encourage students to begin filling their forms as early as possible.
- You will need an Instructor or PI to sign and submit the Final Safety Form by the second deadline, before the Giant Jamboree.
- While you type, the forms will automatically save your answers.
Safety Check-In Form
Opens: June 1, 2018
Some organisms and parts present risks beyond what is ordinary for lab work in synthetic biology. As your project progresses, you should consider the risks presented by each organism and part you plan to use. The White List can help you with this.
Before you acquire or use any organism/part that is NOT on the White List, you must submit a Check-In. Check-Ins allow the iGEM Safety Committee to help you ensure that you will work safely with these riskier organisms/parts.
Safety Form
Opens: June 1, 2018
Comprised of 5 parts
If you will not be able to complete this form before the deadline, please email us and tell us about your situation. Email: safety AT igem DOT org
Complying with the safety requirements is a condition of competing at iGEM - that includes providing all the information in this form by the relevant deadlines. Failure to do so can lead to immediate disqualification from the competition and referral to the Responsible Conduct Committee.
Safety Form
Deadlines
Complete by Friday, June 29, 2018
- Part 1: Contact
- Part 2: About our Lab
- Part 3: About our Project
Complete by Friday, September 21, 2018
- Part 4: New Parts
- Part 5: Sign Off submitted by the Instructor or PI