<p>By fusing the RLuc to CheZ and eYFP to CheY, the bioluminescence can be used as a proxy to demonstrate whether the chemotaxis proteins interact (Figure 3). When no ligand is bound to the Tar receptor, CheA is active and phosphorylates CheY. Because of this, the phosphorylated eYFP::CheY can interact with CheZ::Rluc, bringing RLuc and eYFP in close proximity of each other. This can be measured as a BRET signal when the RLuc substrate is added. Upon binding of a ligand to the Tar receptor, CheA becomes inactivated, ultimately leading to a decrease of the BRET signal. Importantly, the signal can be readily measured by using an affordable bioluminescence assay.</p>
<p>By fusing the RLuc to CheZ and eYFP to CheY, the bioluminescence can be used as a proxy to demonstrate whether the chemotaxis proteins interact (Figure 3). When no ligand is bound to the Tar receptor, CheA is active and phosphorylates CheY. Because of this, the phosphorylated eYFP::CheY can interact with CheZ::Rluc, bringing RLuc and eYFP in close proximity of each other. This can be measured as a BRET signal when the RLuc substrate is added. Upon binding of a ligand to the Tar receptor, CheA becomes inactivated, ultimately leading to a decrease of the BRET signal. Importantly, the signal can be readily measured by using an affordable bioluminescence assay.</p>
In order to achieve our goal of creating a biosensor for the detection of pharmaceutical pollution, a structured approach to our design process was necessary. Determining the requirements for such a biosensor to be functional, and finding the right opportunities and systems to implement these requirements in, resulted in our choice for a three-step approach. On this page, you will find explanations of these three different components that constitute our project, as well as the reasoning behind our choice for a chemotaxis-based biosensor.
Biosensor requirements according to experts and stakeholders
Our stakeholder feedback sessions pointed us in the direction of developing a biosensor for detecting pharmaceuticals. Along this journey, we incorporated the following requirements of our biosensor based on stakeholder feedback:
accurate detection at different concentrations;
clear and easily measurable detection signal;
possibility for detecting diverse ligands;
rapid signaling;
low-cost system.
Chemotaxis: the optimal system to meet all requirements
We chose to base our biosensor on the bacterial chemotaxis system because it offers many opportunities to address the above considerations. Because it is a native bacterial system, it can be produced at low cost (requirement V) and responds rapidly to environmental input (requirement IV).
In their natural environment, the chemotaxis system is used by Escherichia coli bacteria to direct them towards the highest concentration of a ligand. This system consists of a receptor that can be modified to detect a wealth of compounds (requirement III), (Shuangyu Bi et al. 2016). Furthermore, this receptor can be methylated, causing the sensitivity of the receptor to decrease. Customizing the methylation states facilitates the ability to measure a set concentration range (requirement II).
When no ligand is bound to the chemotaxis receptor, it activates a signal transduction pathway of several proteins, including CheA, CheY, and CheZ (figure 1). First, CheA phosphorylates CheY, which subsequently translocates to the cell membrane where it binds the flagellar motor protein, thereby altering its rotational direction to a “running” state. After CheY is bound to the flagellar motor protein, it is subsequently dephosphorylated by CheZ. Upon ligand binding, the receptor is inactivated, leading to an inactivated pathway and a rotational direction of the flagellar motor protein in the “tumbling” state. Since the binding of CheY and CheZ is linked to ligand binding of the receptor, measurement of the binding of these proteins by using the BRET assay (described below) provides a quick and accurate indication of the concentration of ligand present (requirement I and II).
Chemotaxis pathway modifications to address all considerations
To create a biosensor meeting all five listed requirements, the E. coli chemotaxis pathway was customized using a three step approach. First, we set up an assay to verify the extent to which one of the most important chemotaxis receptors, the Tar receptor, could be customized. This enables accurate detection and the possibility to detect diverse ligands (requirement III). Next, a method establishing the ability to measure the activity of this pathway was implemented, using a Bioluminescence Resonance Energy Transfer (BRET)-pair. BRET provides a clear and easily measurable detection signal (requirement II and IV). The last step of the approach facilitates accurate detection at different concentrations, by mimicking receptor methylation. This facilitates detection of different ligand concentrations (requirement I).
Bioluminescence Resonance Energy Transfer Pairs
To measure the concentration of ligand present, the activity of wild type and modified Tar receptors have to be measured. Therefore, we designed a Bioluminescence Resonance Energy Transfer (BRET) based sensor, inspired by a previously made chemotaxis BRET-pair (Cui et al. 2014). BRET is a technique where photons produced by a luciferase are used to excite a fluorophore. We opted to use Renilla luciferase (RLuc) since it produces photons that can excite eYFP. In addition, the substrate for this protein, coelenterazine, is permeable to the cell which makes it perfect for E. coli based bioassays. For energy transfer to occur, the RLuc and eYFP proteins must be less than 10 nm apart. Thus by measuring the ratio of light emitted by the two molecules, we can detect whether they are physically close, as can be seen in figure 2.
By fusing the RLuc to CheZ and eYFP to CheY, the bioluminescence can be used as a proxy to demonstrate whether the chemotaxis proteins interact (Figure 3). When no ligand is bound to the Tar receptor, CheA is active and phosphorylates CheY. Because of this, the phosphorylated eYFP::CheY can interact with CheZ::Rluc, bringing RLuc and eYFP in close proximity of each other. This can be measured as a BRET signal when the RLuc substrate is added. Upon binding of a ligand to the Tar receptor, CheA becomes inactivated, ultimately leading to a decrease of the BRET signal. Importantly, the signal can be readily measured by using an affordable bioluminescence assay.
Receptor Assay
The receptor assay was designed as primary control experiment to check the functionality of the transmembrane fusion receptor. We fused the Tar ligand binding domain (LBD) to the two-component copper sensitive (CusS) receptor. This new hybrid receptor protein detects aspartate instead of copper, and serves as a proof of concept for the ability to create hybrid receptors by exchange of LBDs from two different receptors. The functionality of the fusion protein was verified by using the downstream Cuss pathway.
When a ligand specific for the LBD is bound the receptor, a signal is transduced to the response regulator protein (CusR) which binds to and activates a copper sensitive promoter. Normally, the CusR promoter activates genes involved in copper resistance protecting the bacterium against this potentially harmful transition metal.
In this experiment, the promoter region was coupled to a red fluorescent protein (RFP) sequence. Thus, when aspartate is bound to the receptor, CusR is activated as well as the downstream promoter and RFP is transcribed. This way, the expression of RFP serves as an indicator for a functional Tar-CusS receptor. RFP was used as indicator as it is easily measured using fluorescent light microscopy. The custom receptor was ordered at Integrated DNA Technologies (IDT) while the CusR promotor and RFP were transformed from the iGEM biobrick kit.
Methylation of the Tar receptor
Broader concentration measurements by methylation mimicking
Jos van der Vosse (TNO) suggested quantifiable measurements. Since we did not know the sensitivity of our light signal system at that time, we decided to implement an additional method, facilitating the measurement of set ranges of concentrations. This method is based on the methylation state of the Tar receptor, which influences its sensitivity to ligands.
In the unmethylated state, the receptor transduces the ligand binding signal to an inactivated pathway (Figure 4A and 4B). Upon receptor methylation, the conformational change required to transduce the inactivation signal, is energetically less favorable, resulting in lower occurrence. Therefore, when the same amount of ligand is present, the level of pathway inactivation is lower than in the unmethylated receptor state. Since the Tar receptor has four acidic residues that can be methylated (Q295, E302, Q309, E491), there are in total sixteen different combinations of methylation states, each one resulting in a slightly different sensitivity (Figure 4C).
Application of methylation in our biosensor
The methylation of glutamine (Q) or glutamic acid (E) residues can be mimicked by mutating these residues to alanine (A) (Krembel et al. 2015). The different possible combinations of methylation mimicking alanine mutations yields a wide range of potential sensitivities, which we predicted with our computational ODE-model. As a proof of concept, we chose three different methylation states:
The wild type state, the unmethylated Tar receptor (QEQE, most sensitive);
A Tar receptor with one mimicked methylation site (QEAE, average sensitivity);
A Tar receptor with two mimicked methylation sites (QEAA, least sensitive).
The Tar receptor that we received from a collaboration with iGEM team Groningen was mutated using site-directed mutagenesis and expressed in E. coli strains UU1250 and VS181, which do not express any chemotaxis receptors. In addition, VS181 does not express the methyltransferases CheW and CheB, resulting in a fixed methylation state. The E. coli strains were kindly provided by Shuangyu Bi from the lab of V. Sourjik at the Max Planck Institute for Terrestrial Microbiology in Marburg.
Next, the sensitivity of E. coli for aspartate could be measured. This was achieved by addition of a range of aspartate concentrations and subsequent luminescence measurements by using the self-designed BRET-pair. Our model can be verified and corrected based on these measurements. BRET measurements were validated using a FRET-pair received from Marburg.
Figures will come soon
Cui B, Wang Y, Song Y, et al. (2014) Bioluminescence Resonance Energy Transfer System for Measuring Dynamic Protein-Protein Interactions in Bacteria. mBio. 5(3):e01050-14. DOI:10.1128/mBio.01050-14.
Krembel A, Colin R, Sourjik V (2015) Importance of Multiple Methylation Sites in Escherichia coli Chemotaxis. PLoS ONE 10(12): e0145582.
Shuangyu Bi, Abiola M. Pollard, et al. (2016) Engineering Hybrid Chemotaxis Receptors in Bacteria. ACS Synthetic Biology 5(9), 989-1001. DOI: 10.1021/acssynbio.6b00053