Difference between revisions of "Team:JMU Wuerzburg/Experiments"

Line 6: Line 6:
 
<html>
 
<html>
  
<div class="content">
+
        <div class="content">
 
             <h3>Dry Lab</h3>
 
             <h3>Dry Lab</h3>
 
             <div>
 
             <div>
Line 105: Line 105:
 
             <div>
 
             <div>
 
                 We used the following kits and protocols to conduct our experiments:  
 
                 We used the following kits and protocols to conduct our experiments:  
 
                <span><a href="#experiments_refs">000</a></span><br>
 
 
                 <h4>(RT)qPCR Probe-Kis</h4>
 
                 <h4>(RT)qPCR Probe-Kis</h4>
 
                 <i>Biozym Probe qPCR Kit</i> (Biozym)<sup><a href="#experiment_refs">1</a></sup>
 
                 <i>Biozym Probe qPCR Kit</i> (Biozym)<sup><a href="#experiment_refs">1</a></sup>
Line 220: Line 218:
 
             <br><sup>18</sup> <a href="http://www3.appliedbiosystems.com/cms/groups/mcb_support/documents/generaldocuments/cms_041330.pdf">http://www3.appliedbiosystems.com/cms/groups/mcb_support/documents/generaldocuments/cms_041330.pdf</a>
 
             <br><sup>18</sup> <a href="http://www3.appliedbiosystems.com/cms/groups/mcb_support/documents/generaldocuments/cms_041330.pdf">http://www3.appliedbiosystems.com/cms/groups/mcb_support/documents/generaldocuments/cms_041330.pdf</a>
 
         </div>
 
         </div>
 
 
 
</html>
 
</html>

Revision as of 00:12, 17 October 2018

Dry Lab

The general Plasmodium primer-probe pair was created as described below.
To distinguish suitable sequences for primer design we created a FASTA file with all available mitochondrial sequences of P. falciparum, P. malariae, P. knowlesi, P. ovale and P. vivax from the NCBI database5. These 2080 Sequences were aligned by ClustalO1. For this step we used ClustalO, running on a computing cluster and the following bash command:
nohup clustalo --outfmt=msf -o outputname.msf -i inputname.fasta & > nohup.log

Afterwards we created a frequency matrix from the resulting MSF file. The frequency matrix was created with Emboss Prophecy 2. We used the following parameters:
EMBOSS data file: EDNAFULL
Threshold reporting percentage: 75
Gap opening penalty: 3.0
Gap extension penalty: 0.3

Subsequently we calculated a new matrix based on the frequency matrix. Table 1 shows how we calculated this matrix.
fehlt Table 1:We calculated a matrix with eight columns and as much rows as positions in the frequency matrix. The first row and column are only shown for a better orientation in the matrix.
In this matrix, we searched for positions with a high value in column I (near or equal 1) and a nukleotide summation as high as possible. The sequence of plasmodium is often T/A rich, so we had also to look for a high G/C-content. If a suitable sequence is long enough for primer and probe design, we designed primer and probe with OligoArchitectTM 3. Afterwards we calculated the secondary structure of primer and probe with RNAstructure4. Therefore we used the following parameters:
Temperature [K]: 310.15
Maximum Loop Size: 30
Maximum % Energy Difference (MFE, MEA): 10
Maximum Number of Structures (MFE, MEA): 20
Window Size (MFE, MEA): 3
Gamma (MEA): 1
Iterations (Pseudoknot Prediction): 1
Minimum Helix Length (Pseudoknot Prediction): 3

If the calculated secondary structure is moderate or low, we started testing the primer and probe in the wetlab.

Our primer/probe for Plasmodium falciparum was designed as written below. We created five alignments with ClustalO1. One alignment is for Plasmodium falciparum with 1012 sequences of Plasmodium falciparum from NCBI and four alignments are for Plasmodium malariae, Plasmodium knowlesi, Plasmodium ovale and Plasmodium vivax5. These four alignments were calculated with nucleotide sequences from NCBI of each Plasmodium species 5. The alignments were calculated with ClustalO with the following bash command:

nohup clustalo --outfmt=msf -o outputname.msf -i inputname.fasta & > nohup.log

We used the resulting consensus sequences and aligned these five sequences with ClustalO. Subsequently we searched in the resulting msf file after differences between the consensus sequence of Plasmodium and the other four consensus sequences. Afterwards we created a frequency matrix as described in the part for Plasmodium in general and checked if our regions of interest are highly conserved as described in the part of Plasmodium in general. The primer and probe design was also carried out as described in the upper part.
List of References
1 Sievers F, Wilm A, Dineen DG, Gibson TJ, Karplus K, Li W, Lopez R, McWilliam H, Remmert M, Söding J, Thompson JD, Higgins DG (2011). Fast, scalable generation of high-quality protein multiple sequence alignments using Clustal Omega. Molecular Systems Biology 7:539 doi:10.1038/msb.2011.75
2 Rice P., Longden I. and Bleasby A. EMBOSS: The European Molecular Biology Open Software Suite. Trends in Genetics. 2000 16(6):276-277
3 https://www.sigmaaldrich.com/technical-documents/articles/biology/oligoarchitect-online.html
4 J.S. Reuter and D.H. Mathews. "RNAstructure: software for RNA secondary structure prediction and analysis." BMC Bioinformatics, 11:129. (2010).
5 https://www.ncbi.nlm.nih.gov/

Hardware

Having a qPCR test system is fine. But it is only useful, if you have the specific hardware device for it. Our cycler is constructed very simply: a drawer for the test itself has two clamps to fixate the tube, so it won’t move. Underneath the drawer-slot are the operators for our test system. These operators are heat-elements, thermo sensors and relapsing magnets. To get the blood from one chamber of the tube to the next, we use a pump-lever. This pump-lever is montaged above the test-tube and runs by a small stepper-motor. The lever drives on a gear shaft that rotates by the stepper motor. At the end of this lever there is a roller, which pulls the liquid forward. At the end of the device there are LED-diodes and photocells wired to an ARDUINO computer. The diodes radiate light with 495 nm wavelength at the fluorescent probe. The photocells measure the emitted light from the probe and give the data to the ARDUINO computer. This data makes it possible to derive the presence of Plasmodium types.
fehlt Scheme of our hardware device.

Oligonucleotides

We designed the following oligonucleotieds as either Primer, Probe or our BioBrick:
fehlt

Protocols

We used the following kits and protocols to conduct our experiments:

(RT)qPCR Probe-Kis

Biozym Probe qPCR Kit (Biozym)1
One Step RT qPCR Probe ROX L Kit (highQu)2
Quanti Nova Probe PCR Kit (Quiagen)3
LightCycler ® 480 RNA Master Hydrolysis Probes (Roche)4

(RT)qPCR Sybr Green Kits

LightCycler® FastStart DNA Master SYBR Green I (Roche)5
LightCycler® EvoScript RNA SYBR® Green I Master (Roche)6
LightCycler® 480 SYBR Green I Master (Roche)7

DNA/Plasmid Extaction Kit

innuPREP Plasmid Mini Kit (Analytic Jena)8
innuPREP Gel Extraction Kit (Analytic Jena)9
GenElute Plasmid DNA Midiprep Kit (Analytic Jena)10
E.Z.N.A. Total RNA Kit I (Omega)11

Agarose gel

1,8 % (0,9 g Agarose, 50 ml TAE buffer), 2 µl Ethidiumbromid
Voltage: 100 V

NEB® PCR Cloning Kit (NEB)12

cDNA Synthese with M-MuLV RT Quick Protocol (NEB)13

Template RNA 4 µl, Primer 1 µl, 10x M-MulV buffer 2 µl, M-MulVRT 1 µl, 10 mM dNTP 1 µl, H2O 11 µl 1h incubation at 42 °C
fehlt

Digest with EcoRI-HF and PSTI-HF14 15

DNA 1 µg, CutSmart 10 x buffer 10 µl, EcoRI-HF 2 µl, PSTI-HF 2 µl, H2O to 100 µl

Ligation with T4 DNA ligase16

Agarplates with chloramphenicol resistance

10 g tryptone, 5 g yeast extract, 5 g NaCl, 10 g Agar, H2O to 1 l; autoclave; 10 mg/ml Chloramphenicol

Transformation (Changed from NEB)17

Thaw chemical competent cells on ice
Put 15 ng of the ligation mixture to 50 µl of competent cells
Place the mixture 10 minutes on ice.
Heat shock at 42°C for 45 seconds
Add 1 ml LB-Medium
Place tube at 37°C for 60 minutes and shake 300 rpm.
Centrifuge 2 min at 11000 rpm
Take 850 µl supernatant und resuspend the 200 µl.
Spread it onto the plates.
Incubate overnight at 37°C

Sequencing18

1 µl DNA, 1 µl BigDye 1.1, 1 µl Primer (10 µM), 2 µl H2O
    Thermocycler program: 
    1. denaturation 	96°C 	1min
    2. denaturation 	96°C 	20 s
    3. annealing            50°C	15 s
    4. polymerisation 	60°C 	4 min
    5. cooling 		4°C	∞
                

Seed cells

1. Aspirate medium from cell-culture (two 75 cm2)
2. Trypsinize cells with 2 ml ATV
3. Check cell-detachment under microscope
4. Add 2 ml FCS-medium to stop trypsinization
5. Resuspend cells by pipetting up and down
6. Transfer 3 ml to fresh falcon tube
7. Add 9 ml medium to the flask
8. Transfer 10 µl to the Neubauer chamber,
   Count cells in a four to four square (Count 16 mini squares);
   we counted 182 cells, so we had 1,82 * 10 ^6 cells per ml;
   seed 1,5 * 10^5 cells per well in a 6-well plate, 1,5 * 10^5 / 1,82 * 10^6 = 82,4 µl
9. Dilute cells;
   We had 6 ml in a falcon, so we add 6 ml medium
10. Prepare 2* 917,5 µl = 1,835 ml of cell-culture medium per well in a 6-well plate
11. Add 165 µl cell suspension to each well
12. Shake 6-well plate (3 pieces)

Transfection with PEI

For each well of a 6-well plate
1. 0,3 - 0,5 µg GFP
2. 2,5 - 3,5 µg PUC
3. 100µl DMEM
4. Mix
5. 6 - 9 µl PEI
5. Mix
6. Incubate 15 min at room temperature (RT)
7. Drop briefly at the cells

List of References
1 https://www.biozym.com/desktopmodules/webshop/downloads/331455_170220_Biozym-Probe-qPCR-Kit.pdf
2 https://www.highqu.com/1step-rt-qpcr-probe-rox-l-kit.html
3 https://www.qiagen.com/us/resources/resourcedetail?id=5167d782-9fef-4202-bc79-95f358be7d8c&lang=en
4 https://lifescience.roche.com/en_de/products/lightcycler14301-480-rna-master-hydrolysis-probes.html#documents
5 https://lifescience.roche.com/en_de/products/lightcycler-faststart-dna-master-sybr-green-i.html#documents
6 https://www.lifescience.roche.com/en_de/products/lightcycler-evoscript-rna-sybr-green-i-master.html#documents
7 https://biochimie.umontreal.ca/wp-content/uploads/sites/37/2015/11/LC480SYBRMasterguide.pdf
8 https://www.analytik-jena.de/fileadmin/content/pdf_life_science/Manual/Manual_innuPREP_Plasmid_Mini_Kit_2.0.pdf
9 https://www.analytik-jena.de/fileadmin/content/pdf_life_science/Manual/Manual_innuPREP_Gel_Extraction_Kit.pdf
10 https://www.sigmaaldrich.com/catalog/product/sigma/pld35?lang=de&region=DE
11 http://omegabiotek.com/store/wp-content/uploads/2013/04/R6834-Total-RNA-Mini-Kit-I-Combo-Online.pdf
12 https://international.neb.com/-/media/catalog/datacards-or-manuals/manuale1202.pdf
13 https://international.neb.com/protocols/2016/04/26/first-strand-cdna-synthesis-quick-protocol-neb-m0253
14 https://international.neb.com/protocols/2012/12/07/optimizing-restriction-endonuclease-reactions
15 https://nebcloner.neb.com/#!/redigest
16 https://international.neb.com/Protocols/0001/01/01/dna-ligation-with-t4-dna-ligase-m0202
17 https://international.neb.com/protocols/2012/05/21/transformation-protocol
18 http://www3.appliedbiosystems.com/cms/groups/mcb_support/documents/generaldocuments/cms_041330.pdf