Difference between revisions of "Team:BostonU HW/TERRA Adaptor"

Line 75: Line 75:
 
                 The TERRA Adapter is a scalable, predesigned chip that is capable of selectively dispensing the output of the microfluidic chip running the experiment into the intended lab vessel. The TERRA Adapter serves to increase the number of and types of microfluidic chips that are compatible with our system. This makes the system more user-friendly, as they don’t have to design a chip that both completes a biological experiment and is capable of selecting the proper output to be dispensed. For droplet based experiments, the TERRA Adapter has two valves and a set of four pressure regulators per output. In continuous flow experiments, there are two valves for every output and an extra output that serves as a flush mechanism for cleaning the nozzle between outputs, but no pressure regulators.  </p>
 
                 The TERRA Adapter is a scalable, predesigned chip that is capable of selectively dispensing the output of the microfluidic chip running the experiment into the intended lab vessel. The TERRA Adapter serves to increase the number of and types of microfluidic chips that are compatible with our system. This makes the system more user-friendly, as they don’t have to design a chip that both completes a biological experiment and is capable of selecting the proper output to be dispensed. For droplet based experiments, the TERRA Adapter has two valves and a set of four pressure regulators per output. In continuous flow experiments, there are two valves for every output and an extra output that serves as a flush mechanism for cleaning the nozzle between outputs, but no pressure regulators.  </p>
  
                 After discussions with Fraunhofer and Phenomyx about the lack of standardization in the microfluidic industry, and seeing the advantages of making our system compatible with commercial microfluidic chips, the output selection mechanism was made to be its own chip, the TERRA Adapter. Output selection is a necessary part of TERRA because the system needs direct control over when the output of the microfluidic chip is dispensed despite the fact that the flow into the chip is continuous. With the TERRA Adapter, the experimental chip can be either user-designed or bought commercially (it does not have to include a built-in output selector).</p>
+
                 After discussions with Fraunhofer and Phenomyx about the lack of standardization in the microfluidic industry, and seeing the advantages of making our system compatible with commercial microfluidic chips, the output selection mechanism was made to be its own chip, the TERRA Adapter. Output selection is a necessary part of TERRA because the system needs direct control over when the output of the microfluidic chip is dispensed despite the fact that the flow into the chip is continuous. With the TERRA Adapter, the experimental chip can be either user-designed or bought commercially, it does not have to include a built-in output selector.</p>
 
               </small>
 
               </small>
 
               <div class="row">
 
               <div class="row">

Revision as of 21:08, 17 October 2018

Argon Design System - Free Design System for Bootstrap 4

Argon Design System - Free Design System for Bootstrap 4

TERRA Adapter

Creating the TERRA Adapter

The TERRA Adapter is a scalable, predesigned chip that is capable of selectively dispensing the output of the microfluidic chip running the experiment into the intended lab vessel. The TERRA Adapter serves to increase the number of and types of microfluidic chips that are compatible with our system. This makes the system more user-friendly, as they don’t have to design a chip that both completes a biological experiment and is capable of selecting the proper output to be dispensed. For droplet based experiments, the TERRA Adapter has two valves and a set of four pressure regulators per output. In continuous flow experiments, there are two valves for every output and an extra output that serves as a flush mechanism for cleaning the nozzle between outputs, but no pressure regulators.

After discussions with Fraunhofer and Phenomyx about the lack of standardization in the microfluidic industry, and seeing the advantages of making our system compatible with commercial microfluidic chips, the output selection mechanism was made to be its own chip, the TERRA Adapter. Output selection is a necessary part of TERRA because the system needs direct control over when the output of the microfluidic chip is dispensed despite the fact that the flow into the chip is continuous. With the TERRA Adapter, the experimental chip can be either user-designed or bought commercially, it does not have to include a built-in output selector.

Output Selector with Pressure Regulators
The first features resembling a TERRA Adapter were the valve-based output selectors used the initial versions of our proof of concept chips. An output selector is a combination of two valves and two ports that work in tandem. When one valve is open, the other is closed. This means that the input only going to one of two outputs at any one time, and when the valves are actuated, the output the liquid is flowing to is switched. Using this concept, our simple two-valve output selector system controls when an input is flowing to waste and the output nozzle, allowing direct control over when the output is dispensed. The output selector used in the 4-Pressure Regulator chip is identical to those in the finalized branches of a droplet-based TERRA Adapter.

The TERRA Adapter works for both droplet-based and continuous flow microfluidics. For droplet based experiments, the TERRA Adapter has two valves and a set of four pressure regulators per output. The pressure regulators serve to minimize the disruption in droplet generation on the experimental chip due to the pressure difference caused by the actuation of the valves in the output selector. In continuous flow experiments, there are two valves for every output, there are no pressure regulators, but there is an extra output that serves as a flush mechanism for cleaning the nozzle between outputs.

Below are some TERRA Adapters that our team has created so far:

Single Output, Continuous Flow
Single Output, Droplet-Based


Three Output, Continuous Flow
Three Output, Droplet-Based

We have open-sourced the designs of the TERRA Adapter and added to the 2017 iGEM BostonU Hardware team, MARS', repository of microfluidic chip designs.

Here are the SVG files for each design and its corresponding description and fabrication and assembly documentation.



Scalability

The TERRA Adapter is scalable following radial symmetry about the nozzle output, as seen in the diagram below. The continuous flow TERRA Adapters also follow this symmetry but an extra branch has to be added to each design, except that of a single input, to serve as a flush to clean the nozzle between outputs.



While there is no design limit to the number of branches a TERRA Adapter can have, there exist a fabrication limit as to the number you can feasibly mill on a chip, depending on the method of fabrication and size of chip, the fabrication limit of the TERRA Adapter will differ. Using our current fabrication method and chip size, the largest TERRA Adapter we could manufacture would be one with 5 inputs.