Team:ICT-Mumbai/InterLab

• Judging Form ⇗
• Team
  • Team Members
  • Collaborations
• Software
• Human Practices
  • Integrated Human practices
  • Education and Engagement
• Safety
• Parts
  • Parts overview
  • Composite Parts
• Project
  • Description
  • Design
  • Experiments
  • Notebook
  • InterLab
  • Model
  • Results
  • Attributions

Contact us: igemteamictmumbai@gmail.com  | Follow us:

SCROLL DOWN

InterLab Study

The InterLab study is conducted by the iGEM organization and is an attempt at reducing variability in measurements taken in different laboratories, thus facilitating easier sharing of data between laboratories. More specifically, the Measurement Committee at iGEM is attempting to develop a robust method for fluorescence measurements of Green Fluorescent Protein (GFP) that can minimize lab-to-lab variations in readings taken by a standard plate reader. For more details on the InterLab study please visit the following URL: https://2018.igem.org/Measurement/InterLab

Team ICT-Mumbai participated in the interlab study this year. The plate reader protocol as given on the iGEM website has been strictly followed (the protocol can be downloaded here) and resulting data added to the provided Excel sheet (the Excel sheet can be downloaded here ).
The aim of this year’s InterLab study was to assess the suitability of normalising fluorescence data with the absolute cell count present in the sample, obtained from the number of colony forming units present in the sample, with the assumption that one cell gives rise to one colony.
The InterLab study uses the following 6 test devices:

1. BBa_R0040 (Negative control)
2. BBa_I20270 (Positive control)
3. BBa_J364000 (Test Device 1)
4. BBa_J364001 (Test Device 2)
5. BBa_J364002 (Test Device 3)
6. BBa_J364007 (Test Device 4)
7. BBa_J364008 (Test Device 5)
8. BBa_J364009 (Test Device 6)

Each test device used in the study comprises of the same gene and RBS, but has a different constitutive promoter from the Anderson family of promoters. Each promoter thus will lead to different levels of Green Fluorescent Protein (GFP) expression which will be reflected in the fluorescence readings.
The 6 test devices along with the positive and negative control were transformed into Escherichia coli DH5α cells. The transformed cells were plated onto LB agar plates containing chloramphenicol. Two colonies were taken from each plate and inoculated into LB broth containing chloramphenicol. Absorbance and fluorescence measurements were recorded for each colony as per the protocol given.

Cell measurement Protocol

The instrument settings used for this study are:

• Model – PerkinElmer EnSpire Multimode Plate Reader
• Absorbance measurement wavelength – 600 nm
• Fluorescence measurement wavelengths – 485 nm (absorption) / 525 nm (emission)

The results obtained are shown in the charts given below.

Figure 1: Absorbance measurement for all devices at 0 hours as defined in the protocol	Figure 2: Absorbance measurement for all devices at 6 hours as defined in the protocol
Figure 3: Fluorescence measurement for all devices at 0 hours as defined in the protocol	Figure 4: Fluorescence measurement for all devices at 6 hours as defined in the protocol

The values of absorbance and fluorescence obtained should be equal for both colonies of the same test device. It is seen from the above figures that this condition is observed. The minute discrepancies in the values of absorbance and fluorescence of the two colonies from the same test device can be attributed to human error during the serial dilutions. It is also seen from the data that the values of absorbance and fluorescence increase with time from 0 hours to 6 hours which is as expected. Test Device 1 is observed to be the strongest promoter sequence, while Test Devices 3 and 5 show weak constitutive activity. The difference in activity is due to differences in the promoter sequences of each Test Device. Each promoter sequence is known to exhibit a different strength. For more information on the Anderson family of promoters please visit the following webpage:
http://parts.igem.org/Promoters/Catalog/Anderson

These above charts show the absolute values of absorbance and fluorescence obtained. These values have been normalized using the calibration curves to obtain the equivalent values of Fluorescein concentration (μM) per OD and MEFL/particle in the Excel Sheet submitted to the Measurement Committee at iGEM.

CFU measurement protocol

For the second part of the InterLab study, i.e., the CFU measurements, the dilution series was created according to the given protocol, and the number of colonies that grew on each plate were counted.
Using these values, we can obtain the number of CFUs per ml of culture with initial OD = 0.1, i.e., the number of single cells present per ml of starting culture with initial OD = 0.1. This value can be used to normalize the fluorescence readings obtained in a similar manner as the microsphere calibration curve. On obtaining such data from multiple teams working in different laboratories, the Measurement Committee at iGEM should be able to infer if using the number of CFUs to normalize fluorescence readings is an efficient mode of reporting fluorescence measurements.
The number of CFUs obtained are shown below:

Figure 5: Number of CFUs observed for each dilution as mentioned in the protocol