Team:Madrid-OLM/ProManufacturing

• Team
  • Members
  • Attribution
  • Sponsors
• Project
  • Description
  • Contribution
  • Improve
  • Demonstrate
  • Judging Form
• Aptamers
  • Overview
  • Discovery
  • Characterization
  • Computational
    Improvement
  • Binding to Electrode
• Device
  • Overview
  • First Prototype
  • Final Prototype
    • Overview
    • Microfluidics
    • Electronics
• Experiments
  • Interlab
  • Protocols
    • Aptamer Related
    • Manufacturing
• Human Practices
  • Integrated Human Practice
  • Education and
    Engagements
  • Collaborations
• Awards
  • Hardware
  • Applied Design
  • Entrepreneurship
  • Measurement
• Medals

Manufacturing Protocols

Texto de explicacion/ resumen de la pagina.

Chip

1- Mold making

• Laser engraver hacking

  Laser engraver hacking

  Bill Of Materials: You could see a complete BoM here (upload the bill).

  Amount of time: 3 hours.

  Total costs: 100 €.

  The laser usually come with a proprietary software that only allow you to engrave images. As the chips are going to be cuttered as a vector we’ll need to install a new laser firmware (into the laser) to be controlled with other software (into the PC connected to the laser).

  1. Check if your laser could be directly flashable (flash = installing the new firmware) in this link.If the answer is yes, skip to the “software workflow” step. If the answer is no, just continue reading.

  2. When the Arduino UNO and the CNC Shield with the drivers arrive, substitute the old electronics of the laser with the new ones following this tutorial.The software that you will need to follow this tutorial will be:

• Software workflow
• Calibration
• Cutting

Back to Mold making Index

2- PDMS casting

• Preparing PDMS
• Making a vacuum pump and vacuum chamber
• Degassing
• Polymerization process

Back to PDMS casting Index

3- Plasma bonding

• Modding a microwave
• Calibrating the microwave
• Baking the PDMS

Back to Plasma bonding Index

4- Closing the microfluidic circuit

• Choosing the pump, the tubing and the connectors
• Troubleshooting the leaks

Back to Closing circuits Index

Assemblies