Sometimes, severe injuries unfortunately lead to amputation. Civilians as well as soldiers may be concerned, due to accidents, vascular issues, or even artillery wounds for the last category. Amputations are more frequently located on lower limbs[1] (Figure 1). However, bionic prostheses are nowadays developed mainly for the arms, not for the legs. For the prosthetic industry, designing bionic arms is more challenging because of its capacity to push technological boundaries in order to reproduce movements, sense of feeling, etc. Based on this observation, we focused on a trans-humeral amputation scenario. Nevertheless, NeuronArch’s solution is transposable in different anatomical amputation locations.
NeuronArch’s choice
After a serious accident, the patient is transferred to a hospital. The doctor makes a diagnosis: the injury is too severe and amputation is inevitable. If the situation allows, medical staff presents different relevant options to the patient. The first option is a classic amputation procedure. At best, it would allow the patient to have a myo-electrical prosthesis. The second option is the NeuronArch solution. The NeuronArch device would allow the patient to wear a bionic prosthesis, while the NeuronArch app would monitor his health and prosthesis status. In addition, this solution could be partially supported by Social Security in the next few years. After weighing both options, the patient obviously goes for the NeuronArch option!
Surgical implantation
The first step for a new NeuronArch holder is to order a NeuronArch kit, including:
- the NeuronArch device, making the bridge between the stump and a bionic prosthesis;
- an implantation stem featuring the engineered biofilm
- a charging station, to recharge the device and synchronize data with a remote server
- a personal access to the app / website, to monitor information, such as device’s battery level, the patient's health status, etc.
Once the kit has been delivered, an orthopedic surgeon will osseointegrate the stem (Figure 2). This stem is sent in a sealed package. During surgery, the surgeon drills the bone in its center along its longitudinal axis, while a nurse lifts the NeuronArch stem out of the package. Thanks to a syringe, the nurse drains the culture liquid of the biofilm, contained in a protective cap. Once empty, this cap stays in place in order to allow the surgeon to manipulate the stem with surgical clips without damaging the biofilm and the membrane. The specialist inserts the stem into the bone (Figure 3). The orthopedist places some screws to hold the device in place (to be removed subsequently). The surgeon can now take the protection cap out thanks to a simple quarter turn system, and then complete the surgery by stitching the stump.
Daily life
In the morning, after a night without, the holder plugs the NeuronArch device (Figure 4) and his bionic prosthesis to the stem. Installation is simple, with an ergonomic quarter turn system. His bionic arm moves in an intuitive way thanks to the connection between nerves and the prosthesis, made possible by NeuronArch. With the app he installed on his smartphone (Figure 5), he is now able to check the battery status of his device, to consult his health data or to take an appointment with his primary doctor or his prosthetist (Figure 6).
At night, battery is low and collected data need to be transmitted to the server, in order to update his health data and to improve machine learning. Thus, the amputee removes his prosthesis and puts the NeuronArch device on the charging station (Figure 7). After several hours, the device is charged, data are synchronized (Figure 8), and NeuronArch is ready to start a new day.
Doctor
For his semestral check up, the NeuronArch holder goes to the doctor. In order to share data collected the last six months and his health status with the specialist, the patient shows his personal QR code available on the app (Figure 9). This code acts like a key that maintains his personal data secure. When scanning it, the doctor access to the patient’s dashboard and is now able to provide adapted advice and treatments regarding the situation.
Maintenance
Whether the NeuronArch device encounters a hardware issue, maintenance is made possible (Figure 10). The plastic case, containing the electronic parts, can be unsealed thanks to height screws. To perform this maintenance process, a prosthetist specifically trained can open and check the whole device. If something wrong, the prosthetist will repair or replace the defective parts. The embedded SD card is encrypted, to keep personal data far from prying eyes. NeuronArch have been designed to last a life time.
REFERENCES
- JM. André and J. Paysant, Les amputés en chiffres : épidémiologie, Cofemer, 2006