Sketch

Fermenting→ Filtering→ Reacting→ Extraction→ Particle Manufacturing

Devices

1. Fermentation tank:
TFY-MS automatic mechanical stirring fermentation tank 50L
Working capacity: 65~75%
Product features: The fermentation tank adopts a mechanical stirring system, the stirrer speed can be adjusted continuously. The fermentation temperature, pH, dissolved oxygen and other parameters are automatically controlled, automatically recorded, stored, printed, and suitable for small test and pilot test of fermentation products.

2. Filtration device:
Use membrane filtration to prevent yeast from leaving the system.

3. Reaction tank
Reacted the enzyme with the monolignol, and added other essential material (buffer and H2O2). The capabilities are acid and alkali control, stirring, temperature control and pressure control.
Type: T.T-M.I-2000
Full capacity: 2000 L
Output: 15-50 kg / Hr

4. Low temperature concentration separation extraction system:
The device was filtered by membrane and separated by different molecular weight to separate different substances. Using this equipment, LIGGREEN would be extracted and purified.
Microfiltration membrane: MF Membrane 0.1~0.3um
Membrane area: 5m2
Diluted liquid volume: approximately 100 L / Hr
Temperature: up to 50° C

5. Extrusion granulation (Twin screw)
After heated material to the melting point, it was pumped (Liquid flowed out a tube and cut when it was cooled by air) to form particles, which made LIGREEN into a smaller particulates.
Type: TS 30
Output: 15-50 kg / Hr
Extruder: 7.5-18 kW

Design diagram

Follow figures were complete design diagram of our production line

Figure 1. Design of our entire production line.

Figure 2. The left one is fermentation tank and the right one is filtration device

Figure 3. The left one is reaction tank and next one is low temperature concentration separation extraction system.

Figure 4. The left one was Extrusion granulation, and we would get production at last.