• Design and order primers

Primers for changing gene order in pha operon are designed in Gibson Assembly website

• Preparation of M9 medium
• Primers stock solution preparation

• Amplify and extract the fragments of pSB1C3 backbone, pSB1C3-phaB​
• Gel electrophoresis and Gel extraction
• Amplify and extract fragments of phaA, phaB, phaC with different overlap (failed)

Due to the special primer design from Gibson, except backbone fragment, all of the other fragments were amplified by primers with overhang. In this case, a problem was caused by wrong identity of annealing sequence and overlap sequence. Therefore, it is necessary to produce fragments without overlap firstly, and used them as template, in order to avoid the impact of the overlap and annealing sequence.

• Design and order new primers for phaA, phaB and phaC gene template without overhang
• Purification of pSB1C3 backbone and pSB1C3-phaB DNA fragments
• Amplify phaA, phaB and phaC gene templates by PCR followed by gel electrophoresis and gel extraction

• Amplify separately phaA, phaB, and phaC genes fragments with different overhangs
• Gel electrophoresis of phaA, phaB, and phaC genes fragments
• Assemble fragments to build new constructs using Gibson Assembly and transformation ( E. coli DH5α competent cells)
• colony PCR and double digestion

Figure 1. Results of colony PCR. The fragments of 4kb size were expected to be the positive results (a)BCA are 12 colonies from plates expressed by phaBAC plasmid. (b)BCA are 12 colonies from phaBCA plasmid. (c) represents 12 colonies from phaABC expression plasmid. 11 colonies in (d) are from phaCBA plasmid. (e) is the result if negative control of this PCR experiment, which represents colonies from expression of empty vector. (f) shows 8 colonies from phaACB plasmid. Finally, (g) is the second negative control of purity water used in this reaction, no band means dH₂O used is pure.

• Confirmation new plasmids by double digestion. Transfer new plasmids into another strain E. coli BL21(DE3)

• Culture the coli strain harboured phaACB operon or phaCBA operon to produce PHB (250 ml flasks)
• The optical density was measured every 3 hours for plotting growth curves. Spread bacteria that harboured new constructs phaBAC, phaBCA, phaCBA, phaACB, phaABC or original phaCAB operon on Nile Red plate. Culture E. coli that contained new constructs of phaBAC, phaBCA, phaCBA, phaACB or phaABC for Nile Red plate reader assay.
• Optical density measurement and fluorescent intensity measurement
• Extract produced PHB from coli that harboured phaACB operon or phaCBA operon after 72h cultivation


Figure 2 Nile red plates images of E. coli that harboured new constructs. On each plate, half plate is spread by negative control- pSB1C3 empty vector, which should not have any fluorescence, another half is plated with new operon plasmids culture.

 

Table 1 OD value detected by Nile Red plate reader

Hours		BAC	BCA	CBA	ACB	ABC
24 h	2% Glucose	0.45±0.02	0.48±0.01	0.65±0.01	0.69±0.01	0.42±0.01
	3% Glucose	0.42±0.01	0.44±0.01	0.64±0.01	0.63±0.01	0.47±0.01
45 h	2% Glucose	0.66±0.01	0.70±0.01	0.94±0.02	0.99±0.02	0.61±0.01
	3% Glucose	0.66±0.01	0.68±0.02	0.94±0.01	0.98±0.03	0.68±0.01

Table 1 is the OD600 value of Nile Red plate reader, culture fed with 2% glucose and 3% glucose are incubated for 24h and 45h, then stained by Nile Red, and placed into a black 96 well microplate and read by Tecan Infinate M200 (provided by Edinburgh Genome Foundry). Excitation wavelength is 520 nm, and emission wavelength is 590 nm. Data are average number ± SEM (standard error of mean), n=3. P-value<0.05. 

Table 2 Fluorescence intensity measurement by Nile red plate reader

Hours		BAC	BCA	CBA	ACB	ABC
24 h	2% Glucose	1,683±132	2,371±90	35,876±850	41,757±586	4,534±311
	3% Glucose	1,758±48	2,437±108	40,330±134	31,486±670	4,651±222
45 h	2% Glucose	5,374±97	5,432±236	29,874±685	42,295±793	5,054±182
	3% Glucose	5,415±270	5,164±41	27,890±989	28,311±1988	4,499±95

Table 2 shows the fluorescence value detected by Nile red plate reader, samples stained by Nile Red, and placed into a black 96 well microplate and read by Tecan Infinate M200 (provided by Edinburgh Genome Foundry). Excitation wavelength is 520 nm, and emission wavelength is 590 nm. Data are average number ± SEM (standard error of mean), n=3, P-value<0.05.

The Production of PHB



Figure 3 Image of extracted PHB after cultivation of 45 hours - Figure 3 indicates the PHB products extracted from E. coli BL21 harboring six pha operons and empty vector plasmid, samples shown in figure 3 were incubated for 45h

 

Figure 4 Image of extracted PHB after cultivation of 72 hours - Figure 4 shows the PHB products from E. coli BL21 harboring phaCBA and phaACB, which incubated for 72h

Table 3 Dry weight of produced PHB and melting temperature

Operon construct	Dry weight	Melting temperature start	Finish
Yield of PHB after 45h cultivation
Empty vector	~0	/	/
phaCAB origin order	0.237 g	150	185
phaACB	0.201 g	156	180
phaCBA	0.072 g	160	186
phaBCA	0.021 g	158	184
Yield of PHB after 72h cultivation
phaACB	0.044 g	148	165
phaCBA	0.18 g	176	180

Table 3 indicates the dry weight and melting temperature of all PHB products extracted in this project

 

 

• A bktB gene from eutropha H16 was codon-optimised for E. coli and synthesised by IDT in two parts (B1 and B2 fragments) with 696 bp overlap.
• Order the primers for fragments amplification
• M9 medium and 30% glucose stock solution preparation

• Establish a new constuct: pSB1C3-phaCAB-bktB (cloning strategy was shown below)



Figure 1. B1 and B2 fragments were codon-optimised for E. coli and synthesised by IDT. The 696 bp overlap was in green and restriction enzyme sites were coloured by red. Two pairs of primers were ordered from IDT to amplify bktB, among which B1 forward primer and B2 reverse primer were used to amplify bktB fragments.

 

• Make competent cells ( E. coli BL21 and E. coli DH5)
• Determine the tolerance of high concentration of propionic acid.

Three concentrations (8mM, 32mM and 48mM) were tested using E. coli cells that harboured pSB1C3-phaCAB.

• Determine the suitable glucose concentration for cultivation. (0.5%, 1%, 2%, 3%, 5%, 10%, 20%)
• Establish new control plasmid pSB1C3 by cutting of the RFP gene.

 



Figure 2. Plasmid of control plasmid pSB1C3-RFP. The new control plasmid pSB1C3 was obtained by digesting pSB1C3-RFP with restriction enzyme: NotI followed by self-ligation.

 

• Establish another construct pSB1C3-phaCB-bktB

Figure 3. The bktB fragments and psB1C3-phaCB-bktB fragments were highlighted by red squares.

• Transformation of two new constructs.

The transformation was tested by double digestion and colony PCR

• Order the Nile red fluorescent dye and prepare the stock solution of 1 mg/ml
• Test whether Nile red can be used for PHA production confirmation and establish new Nile red semi-quantitative measurement.

Figure 4. Nile red staining plate was exposed to the blue light and UV light respectively. High fluorescent was observed on the right part (cells containing pSB1C3-phaCAB plasmid) due to the produced PHA.

• Culture the E. coli strain BL21 harbouring pSB1C3-phaCAB-bktB or pSB1C3-PhaCB-bktB in M9 medium that contained 3% glucose, 8mM propionic acid and 10mM acetic acid.
• Optical density of culture was measured at 16 hours, 24 hours. 32 hours, 48 hours and 56 hours.
• Measure fluorescent intensity of cultures to provide real-time information of PHA production. (semi-quantitative Nile red measurement)

 

Figure 5. Samples were collected at different cultivation times and stained by Nile red fluorescent dye. The fluorescent intensity increased during the cultivation times.

 

• Nile red plate staining

 

Figure 6. Nile red Plate staining of cells harbouring pSB1C3-phaCAB-bktB or pSB1C3-phaCB-bktB. Compared with control cells harbouring control plasmid, the production of PHA was confirmed.

 

• Extraction of produced PHA

	OD600	Volume (ml)	Total PHA (g)	PHA (mg/ml)
pSB1C3	1.35	100ml	0	0
pSB1C3-phaCAB	1.707	100ml	0.044	0.44
pSB1C3-phaCB-bktB	2.15	100ml	0.023	0.23
pSB1C3-phaCAB-bktB	1.875	100ml	0.021	0.21

 

 

• Measure the melting point of extracted PHA

	Tm 1(°C)	Tm 2 (°C)	Tm 3 (°C)
Pure PHB from Sigma	170-179	168-176	168-174
PHBV with 12% 3HV from Sigma	159-161	160-160	161-164
PHA from pSB1C3-PhaCAB	160-168	160-162	161-164
PHA from pSB1C3-PhaCB-bktB	150-155	149-151	149-152
PHA from pSB1C3-PhaCAB-bktB	155-159	156-161	157-159

 

Melting temperature of extracted PHA was measured and compared with PHB and PHBV products which were brought from Sigma. Tm of standard pure PHB product was between 170 °C and 180 °C and Tm of PHBV (12 % 3HV) was between 160 °C and 164 °C.The melting temperature of extracted PHA differed from different constructs. The PHA extracted from cell harbouring pSB1C3-phaCAB plasmids showed higher melting temperature with approximately 165 °C. While the PHA extracted from the cells harbouring pSB1C3-phaCB-bktB or pSB1C3-phaCAB-bktB plasmids presented lower melting temperature at range of 150 °C -155 °C and 158 °C -162 °C respectively.

 

 

• Recover BioBricks from iGEM 2018 distribution kit
• Design the construct strategies. Two standard BioBricks (Table 1) were decided to be used for the experiments.

Table 1 Basic information of BioBricks

Biobrick	Well	Plate	Insert Length	Backbone	Antibiotics Resistance
BBa_K390501	19H	6	1136 bp	pSB1C3	chloramphenicol
BBa_K1149051	12M	4	4271 bp	pSB1C3	chloramphenicol

 

• Making competent cells ( coli BL21 and DH5α)
• Double digestion for confirming the Biobricks
• Transformation test

• Design and order fragments from IDT

phaR promoter-phaR-phaP promoter (proR-phaR-proP) and primers for amplifying DNA fragment of phaP and HlyA

• Confirm the cloning strategy

Figure1. Strategy of R-P-H assembly

• Due to the ordered sequence with high content of GC, the first IDT order failed to complete. The sequence of IDT-synthesized DNA was optimized and reordered.

• Double digestion of backbone vector with restriction enzymes of SpeI and Pst
• Gel electrophoresis and Gel extraction
• Amplify phaP and phaP-HlyA followed by gel electrophoresis

   

Figure 2 Images of 1% gel electrophoresis - A.1.0% agarose gel electrophoresis for PCR product of phaP and phaP-HlyA. Lane: 1. 1 kb ladder (molecular weight marker, NEB). 2. 25μL PCR reaction for phaP (569 bp). 3. 25μL PCR reaction for phaP-HlyA (759 bp). B. 1.0% agarose gel electrophoresis for PCR product of proR-phaR-proP. Lane: 1. 100 bp ladder (NEB). 2. 25μL reaction of PCR amplification for proR-phaR-proP (853 bp).

• Ligate digested backbone pSB3T5 with phaP and digested backbone with phaP-HlyA, followed by transformation to coli DH5α competent cells.
• Order the new primers for sequencing the end of phaP DNA fragment to test whether the stop codon exists.
• Send plasmid pSB3T5-phaP-HlyA to Dundee Sequencing Services for Sanger sequencing.
• Ligate DNA fragments proR-phaR-proP with pSB3T5-phaP and pSB3T5-phaP-HlyA respectively. Double digest constructs for confirmation.



Figure 3 Image of diagnostic digest of pSB3T5-phaP and pSB3T5-phaP-hlyA with NsiI and PstI. Lanes - 1. 1 kb ladder (molecular weight marker, NEB). 2 and 3. Potential pSB3T5-phaP digested with NsiI and PstI. 4 and 5. Potential pSB3T5-phaP-HlyA digested with NsiI and PstI.

• Design primers for deleting the stop codon in between the phaP and HlyA.

• Mini-prep for plasmids R-P and R-P-HlyA followed by double digestion. (failed). Results were showed in figure 4a.
• Amplify pSB3T5-phaP-HlyA (del) and R-P-HlyA (del) for deleting the stop codon. Running 0.8% agarose gel (figure 4b)



Figure 4 Images of gel electrophoresis. a. Diognostic digest of R-P and R-P-HlyA with EcoRI and PstI. Lanes: 1. 1 kb ladder (molecular weight marker, NEB). 2. Potential R-P digested with EcoRI and PstI. 3. Potential R-P-H digested with EcoRI and PstI. b. 1.0% Agarose gel electrophoresis for PCR product of plasmid pSB3T5-phaP-HlyA (del) and R-P-HlyA (del).Lane: 1. 1kb ladder (NEB). 2. 25μL reaction of PCR amplification pSB3T5-phaP-HlyA. 3. 25μL reaction of PCR amplification R-P-HlyA.

• Co-transform the plasmid of phaCAB operon and the construct R-P into coli BL21 competent cells. The recovered cells were spread on the LB agar plates containing 10 μg/ml tetracycline and 25μg/ml chloramphenicol. (failed)
• Double digest pSB3T5 backbone to remove the RFP in between the EcoRI and Xba
• Transformation:

Repeat the co-transformation of phaCAB operon and R-P with lower concentration of antibiotics (8 μg/ml tetracycline and 20 μg/ml chloramphenicol). 

Transform plasmid R-P into E. coli BL21 competent cells.

Transform the ligation of pSB3T5 without RFP (RFP (-) into E. coli DH5α competent cells.

• Colony PCR and double digestion



Figure 5 Image of Agarose gel electrophoresis. a. 1.0% Agarose gel electrophoresis of colony PCR product for screening the positive construct of P.  Lane: 1. 1kb ladder (Promega). 2-14. 25μL reaction of colony PCR amplification for proP-phaP (bp) with different colony extraction.  The positive construct was expected to show a band with size of 1067 bp (proP-phaP + extra sequence in between the VF and VR primers.). b. 1.0% Agarose gel electrophoresis of colony PCR product for screening the positive construct of R.

• Mini-prep for plasmid R-P-HlyA (del) and P and transformation.

• Measure the optical density of preculture of the recombinant coli BL21 strains that harboured R-P, phaCAB operon+R-P, phaCAB operon+ RFP (-), pSB1C3 (without RFP) +RFP (-) and RFP (-)
• Transformation:

Co-transform the phaCAB operon and R-P-HlyA (del) into E. coli BL21 competent cells

Co-transform the phaCAB operon and P into E. coli BL21 competent cells.

Transform the R-P-HlyA (del) into E. coli BL21 competent cells.

Transform the P into E. coli BL21 competent cells.

• Colony PCR to fast screen the positive constructs of R.

Figure 6 Image of 1.0% Agarose gel electrophoresis of colony PCR product for screening the positive construct of R - Lane: 1. 1 kb ladder (Promega). 2-14. 25μL reaction of colony PCR amplification for proR-phaR with different colony extraction.

The positive construct was expected to show a band with size of 935 bp (proR-phaR + extra sequence in between the VF and VR primers.

• Pre-culture all the recombinant coli BL21 strains: phaCAB operon+R-P, phaCAB operon+R-P-HlyA (del), phaCAB operon+p, phaCAB operon+R, phaCAB operon+RFP(-), 1C3-RFP(-)+RFP(-).
• The Nile red plate staining



Figure 7 Nile red plates to confirm PHB production (48 hours)

In each picture of a, b, c, d, e, there were 4 Nile red plates. The left plates in the first rows were strains harbouring phaCAB operon and constructs. The right plates in the first row were strains containing the construct only. The left plates in the second row were strains harbouring phaCAB operon only. The right plates in the second row were pSB1C3 and pSB3T5 backbones. phaCAB operon strain showed strong signal of fluorescence because of PHB produced and the backbone strain did not due to no PHB produced.

• Inoculate the preculture into 250 ml flasks with 50 ml of M9 medium containing 3.0% glucose, 25 μg/ml chloramphenicol and 10 μg/ml tetracycline.
• Measure the optical density to plot the growth curves.

 

Figure 7 The growth curves of E. coli strains that harboured different recombinant constructs

Table 2 PHB production

	Intracellular PHB	Secreted PHB	Mass of CaCl2	Secreted PHB
phaCAB operon+pSB3T5-R-P	0.071 g	0.057 g	0.05549 g	0.0015 g
phaCAB operon+pSB3T5-R-P-H	0.043 g	0.086 g	0.05549 g	0.0305 g
phaCAB operon+pSB3T5-R	0.065 g	0.058 g	0.05549 g	0.0020 g
phaCAB operon +pSB3T5-P	0.031 g	0.030 g	0.05549 g	0.0000 g
phaCAB operon +pSB3T5	0.010 g	0.038 g	0.05549 g	0.0000 g
pSB1C3+pSB3T5	0.000 g	0.042 g	0.05549 g	0.0000 g

• Extract produced PHB (The dry weight of extracted and secreted PHB were listed in the Table 2



Figure 8 Column graph for dry weight of secreted and intracellular PHB among different stains

• Measure the melting point of produced PHB.

Table 3 The melting temperature of produced PHB

• Discuss the project aims and decide individual project strategy (shown in Figure 1).



Figure 1 Proposed mechanism for propionate synthesis utilising the Sleeping beauty mutase operon (SBM) and Methylmalonyl-CoA epimerase (MCE) - Succinyl-CoA is converted into Methylmalonyl-CoA-R by the methylmalonyl- CoA mutase ScpA. Methylmalonyl-CoA-R is converted into Methylmalonyl- CoA-S by MCE or an uncharacterised, native pathway. Methylmalonyl-CoA-S is converted into propionyl-CoA by the methylmalonyl-CoA carboxylase ScpB. The CoA from Propionyl-CoA is transferred onto Succinate from the citric acid cycle by the Propionyl-CoA: Succinate CoA transferase ScpC, resulting in the production of propionate and Succinyl-CoA.

• Determine whether E. coli  DH5 proposes SBM in genome and if it proposes any change that impact the resulting protein structure and function.
• Design and order DNA fragments from IDT to obtain Sleeping Beauty Mutase (SBM) which consists of genes ScpA, ScpB, ScpC, and
• Design and order the primers for amplifying SBM operon.

Figure 2 Illustrated diagrams of designed primers - A) The combined primers of Sbm Forward 1 and 2. Sbm Forward 1 annealed to ScpA at its 3’ end, and introduces a Ribosome binding site (RBS; green), AvrII restriction site (black), and half of Promoter BBa_J23110 (orange). Sbm Forward 2 annealed to the amplified sbm operon through containing a complete Promoter BBa_J23110 sequence, and introduced the remaining sequence, alongside XbaI (blue) and EcoRI (red) restriction sites. B) Illustrated diagram of Sbm Reverse Primer. Anneals to the end of ScpC (green), and introduces a SpeI restriction site (orange), and a NsiI restriction site (red).

• Amplify the SBM operon with ordered primers as shown in Figure 1 by tow-step PCR. And analysed by gel electrophoresis.



Figure 3 Gel Electrophoresis of DNA from 2 PCR reactions - PCR-1 is PCR results from the amplification of the SBM operon from E. coli DH5-gDNA, with a band between 6kbp and 5kbp, and a band of below 500bp. PCR-2 used the products from PCR-1 as template DNA and used the Sbm forward 2 and Sbm Reverse primers – a single band of below 500bp can be observed.

• TA cloning with SBM to obtain more SBM operon without doing PCR many times.

SBM operon is ‘A-tailed’ prior to ligating into pCRTM2.1-TOPO, and transformed into One Shot® cells and plated. Following incubating overnight, blue colonies and white colonies could be observed. White colonies were used to purify plasmid DNA, and were analysed by digestion with EcoRI.



Figure 4. Analytical digest of TA colonies. Marker ladder used was NEB 1kb ladder, and all samples show a band between 3kbp and 4kbp, and a band below 500bp.

Bands of below 500bp could be observed, suggesting that some of the primer dimers may have been contaminating the extracted SBM operon sample, which were A-tailed, and effectively out- competing the much larger SBM operon fragments to be ligated into pCRTM2.1-TOPO.Again, another cloning method for the utilisation of the SBM operon had to be devised.

• Construct pSB3T5: MCE: Promoter- RFP and pSB3T5: Promoter-RFP followed by gel electrophoresis.



Figure 5 Restriction Analysis of various constructs. Marker ladder was Promega 1kb ladder. pSB3T5: MCE: Promoter-RFP was digested with SpeI and/or PstI. Single digests both produced bands of 4757bp, whereas double digest produced 2 bands of 887bp and 3870bp. pSB3T5 was digested with EcoRI and/or PstI. Single digestion results in bands of 4280bp, whereas double digest produced bands of 3211bp and 1069bp. pSB3T5: Promoter-RFP was digested with SpeI and/or PstI. Single digests both produced bands of 4156bp, whereas double digest produced 2 bands of about 3269bp, and 887bp. BBa_J23106 was digested with EcoRI and/or PstI. Single digestion results in bands of 2983bp, whereas double digest produced bands of 2038bp, and 945bp. PSB3T5: MCE was digested with EcoRI and/or PstI. Single digests both produced bands of 3845bp, whereas double digest produced 2 bands of 3211bp and 634bp.

• Insert the operon into BioBrick vevtor such as pSB3T5, through digesting with EcoRI and Nsi

Figure 6 a. Diagram illustrating the construction of pSB3T5: MCE. RFP (red) was cleaved from pSB3T5 by digestion with EcoRI and PstI. b. Diagram illustrating the construction of pSB3T5: Promoter-RFP. RFP (red) was excised from pSB3T5 by digesting EcoRI and PstI.

• Construct pSB3T5: SBM followed by Colony PCR. The strategy was showed in Figure 7 and gel electrophoresis of colony PCR was showed in Figure 8.



Figure 7 Diagram illustrating the construction of pSB3T5 - SBM. pSB3T5: Promoter- RFP was digested with SpeI and PstI, removing RFP (red). The SBM operon (orange) was digested with AvrII and NsiI. The overhangs generated are illustrated. The SBM operon was ligated into pSB3T5: Promoter downstream of the promoter (purple).

  

Figure 8 a. Image of DNA gel electrophoresis from colony PCR of transformants possessing pSB3T5: SBM using SBM Forward 1 and SBM Reverse Primers. Control lane is the same PCR with no template DNA. Control shows a large empty lane except for a single band below 250bp. All samples show a large smear that is intense from the well down to 5551bp, corresponding to the SBM operon, where it becomes less intense. b. Analytical digest of pSB3T5: SBM using XbaI and SpeI, followed by gel electrophoresis. Uncut sample showed 2 bands, one above 10kbp, and one between 8kbp – 6kbp. XbaI and SpeI single digests show a single band of 8790bp. XbaI and SpeI double digest shows two bands: a pSB3T5 backbone at 3250bp, and the SBM operon at 5540bp.

• Two different strategies to construct pSB3T5: MCE: SBM

Figure 9 a. Diagram illustrating the construction of pSB3T5: MCE: SBM. pSB3T5: MCE: Promoter-RFP was digested with SpeI and PstI, removing RFP (red). The SBM operon (orange) was digested with AvrII and NsiI. The overhangs generated are illustrated. The SBM operon was ligated into pSB3T5: Promoter downstream of the promoter (purple). MCE is indicated by black. b. Diagram illustrating the construction of pSB3T5: MCE: SBM. pSB3T5: SBM was digested with EcoRI and XbaI. pSB3T5: MCE was digested with EcoRI and SpeI to excise MCE (brown). The resulting overhangs are displayed. MCE was ligated into the plasmid upstream of the promoter (purple) and the SBM operon (orange), completing the plasmid.

• Pellets of pSB3T5, pSB3T5: MCE, pSB3T5: SBM, and pSB3T5: MCE: SBM grown in LB broth were resuspended in M9 minimal media with 3% glucose and tetracycline in order to assay for the production of propionate.
• Detect the produced propionate by detecting the change in absorbance at 410nm using spectrophotometer.

Fe³⁺ ions have been shown to react with short chain fatty acids, such as propionate, where the ion complexes with the organic acid and is reduced. This changes the colour of the iron ion, and this change can be detected in a spectrophotometer by a change in absorbance at 410nm. (failed)

Table 1 Absorbance at 410nm of propionate standard solutions

• Design and order primers from IDT
• Amplify the sucAB and sucCD from coli DH5genome (Figure 1), sucAB and sucCD are expected to be 4 kb and 2kb respectively.

Figure 1 Gel electrophoresis image of sucAB and sucCD genes from PCR amplification on 1% agarose gel, contrast with 1KB ladder from NEB, generating fragments for the following experiments.

• Construct plasmids: pSB3T5-sucAB, pSB3T5-sucCD, plasmid pSB3T5-X
• Transform recombinant plasmids to coli DH5
• Isolate the plasmids and double digest them with corresponding restriction enzymes for confirmation

Figure 2. A Gel electrophoresis image of pSB3T5-sucAB digested with EcoRI and HindIII, and run on 1% agarose gel, contrast with 1KB ladder from NEB. B.  Gel electrophoresis of pSB3T5-sucCD digested with EcoRI and HindIII, and run on 1% agarose gel, in the third well, there are two bands, the one located above is ringed DNAs are not be digested, sample loaded in this well is not cut completely.

• Transform recombinant plasmids to coli forming strains SC1 to SC11. (shown in Table 1)

Table 1  Basic information of engineered E. coli strain

2. Pre-cultured strain SC1, SC2 and SC3 in LB medium
3. Inoculate the pre-culture to M9 minimal medium with 1% glucose, 0.01M propionic acid and 10M IPTG.
4. Optical density at 600nm was measured to plot the growth curve and growth rate was calculated using equation below.

               Table 2 Growth rate of E. coli strains SC1, SC2 and SC3

Figure 3 Growth curves of strain SC1, strain SC2 and strain SC3 that harboured plasmid pSB3T5-sucAB, plasmid pSB3T5-sucCD and plasmid pSB3T5-X respectively. 1% glucose, 0.01M propionate and 10 μM IPTG were added in the M9 medium.

• Pre-culture six different strains to Investigate the effect of sucAB and sucCD gene on growth
• Measure the germinate multiple* (GM) of each strain, which represented the proliferation capacity of cells (shown in figure 4)



Figure 4 Images of growth curves and Germinate Multiple - Stacked columns reflect growth rates of each strain under each case. Table at underneath the X-axis diaplays OD₆₀₀ measurement of six strains under serial propionate concentrations varying from 0 to 0.04 M at the interval of 0.01 M along with time line, time 0: immediately after strains are inoculated into M9 medium, 19: OD₆₀₀ was measured after cultivation of 19 hours, 24: OD₆₀₀ was measured after cultivation of 24 hours

• Determine the amount of propionic acid in the medium to investigate the effect of sucAB and sucCD gene on propionate uptake. Required standard curve was plotted during the pre-experimental. (shown in Figure 5)

Figure 5 Standard curve and the equation between the absorbance and propionate concentration.

• Obtain the amounts of propionic acid that utilized by coli strain SC7, SC8 and SC9.

Figure 6 The bar chart represented the amount of propionate taken by three different strains

*GM defined as final cell concentration / inoculation cell concentration   

• Dry the cells after cultivation of 60 hours.
• Nile red plate staining to confirm the production of PHBV



Figure 7 Images of Nile red plate which are exposed to blue light or UV light; all six strains were spread on the plate for overnight culture 

• Measure the cell dry weight (CDW).



Figure 8 Absolute cell dry weight of each strain against propionate concentrations, indicating the yield of each strains - It can be seen that when 0.03 M, all three strains have largest absolute dry cell weight, since cultured enough time, the same as PHB production, which corresponding to the largest absorption of propionate in 0.03M

• Change the concentration of IPTG. The effect of different IPTG concentration on cell growth and PHBV production were compared



Figure 9 Growth of strain-SC7, SC8 and SC9 under different IPTG concentration, all the cases are cultured in the same condition. The line graph at left is the growth curve of strain-SC7 with IPTG concentration of 0, 0.05M and 0.1 M, the graph in the middle is from strain-SC8 and the line graph at right is strain-SC9.

• Measure the fluorescent intensity of three different strains using Plate Reader

Figure 10 Bar chart of Fluorescent intensity - Cells were cultured with different concentrations of IPTG, fluorescent intensity was measured at cultivation of 24 hours and 48 hours

Replace the T7 promoter with hybrid promoter, obtaining plasmids pSB3T5-sucAB-hypro and pSB3T5- sucCD-hypro

Jackson's notebook can be found here