Difference between revisions of "Team:Valencia UPV/Demonstrate"

Demonstrate

After long months of effort and dedication, Printeria, the project of the Valencia UPV team is now a reality! All our work has been reflected in our device. With this project we intend to make the approach to Synthetic Biology a reality, but... to what extent has our team been able to develop Printeria? Does it really work?

Printeria concept-testing

Here we show all the evidence to prove that the Printeria device really works.

• The entry of consumables system is a completely original approach in order to dispense precise quantities of liquid in a compact and highly controllable way. In the following video it is shown how our entry system works:



Proof of concept of the entry system.

• The digital microfluidics technology is the basis of Printeria. It allows us to recreate the experiments that take place in the lab in an accurate and automated way, providing a highcontrol of the reactions. First, we accomplished the movement of the droplets in smaller test boards, as you can see here:

  

  Test boards

  After testing the digital microfluidic technology, we were able to approach the final surface design. We made it larger so that it could hold a higher number of pads and in order to implement the hot and cold zones, leading in the following design:

  

  PCB surface final design

• In order to do the assembly, it is necessary to make the droplets go through cyclic temperature changes. For this purpose, cold and hot zones have been implemented, thanks to a resistance and two peltiers, between which the drops will move.To prove the functioning of the thermocycler, an assembly of BBa_K2656024 (Link) into P10500 (Link) war made and the results are the following:





Hol and cold zones' experiment results

• We have included the design of out electroporator from Hype It iGEM project, developed in 2016 by Valencia UPV team. The results of our experiment using it are shown here:

GRÁFICA

• For the output we have included an Optical Density and Fluorescence sensors in order to measure data from the bacteria that are growing on the measurement zone. The results of our tests are the following:

  OD measurements registred by Printeria OD sensor adn fitted to an exponential curve of cell growth.

  GRAFICA FLUORESCENCIA

Printeria Wet Lab demonstrations

In this section you can check all our Wet Lab demonstrations...

We have proved that assembling functional composite parts with the Golden Gate method with our basic parts is possible... Here you can see a sfGFP transcriptional unit that has been obtained by employing Golden Gate assembly method.

Assembly of BBa_K2656103 transformed into electrocompetent bacteria.

It has also been proven that by using linearized destination vectors in the Golden Gate assembly reactions, a very small number of bacteria transformed with vectors without the desired insert are obtained. Here you can see a GFP transcriptional unit obtained by using a linearized destination vector in the assembly reaction.

Transformed bacteria resulting from the assembly of BBa_K2656105 TU.

Another demonstration is that electrocompetent bacteria can be stored at -20ºC for at least two weeks and chilled for 4 hours at room temperature (30.3ºC) without losing their competence.

Serial decimal dilutions (from left to right: 10^-2, 10^-1 and 10⁰) of transformed electrocompetent bacteria stored at -20°C for two weeks and set at Room Temperature (37°C) 4 hours before electroporation. These bacteria are transformed with P10500 and plated in LB-agar petri dishes with cloranphenicol.

Comparison between fluorescence and absorbance of Golden Gate and BioBrick TU.