Introduction
Assembly methods using type IIS restriction enzymes (based on the Golden Gate technology) have a great advantage over those using type II: the reaction is performed in a single step, without the need for gel band purification, therefore increasing the efficiency of the assembly and reducing the time consumed. In addition, the Golden Gate technology allows to assemble more than two pieces and the backbone in a single reaction. These characteristics allows the automation of the Golden Gate assembly method, what suits Printeria perfectly.
Despite these advantages of the Golden Gate technology, finding collections of parts in the same standard optimized for E. coli, and well characterized, is very complicated. This is the reason why we decided to create our collection of basic parts, which is based on some of the most used parts in E. coli from the Registry of Standard Biological Parts.
To create it we used the GoldenBraid 3.0 standard, so they can be used both with the BioBrick and Golden Gate assembly methods . In addition, to give added value to this collection, we have made an exhaustive characterization of these parts.
In our collection, we have included different types of basic parts so that, combining them, we can create composite parts (transcriptional units) with different behaviours: constitutive or inducible, dependant of another genetic construction, single parts of genetic circuits such as oscillators, etc.
Basic Parts
All our basic parts are inserted in the plasmid BBa_P10500 and are compatible with BioBricks grammar, as they do not contain any illegal sites for RFC10. Moreover, they do not sites for the type IIS restriction enzymes BsaI and BsmBI, used in the Golden Braid assembly. For information on how these parts have been designed, see our design page.
Promoters
With respect to promoters, we include three constitutive promoters of different stregths, a strong promoter for T7 phage DNA polymerase, and a promoter for the sigma 32 subunit of E. coli DNA polymerase.
In addition, we have included three promoters regulated by a transcription factor: the inducible pBad, positively regulated by AraC in the presence of L-arabinose, and the inducible and repressible lux promoters, positively and negatively regulated by LuxR in the presence of Acyl-homoserine-lactone, respectively.
Table 1. Our promoter Collection.
| Part | Original BioBrick | Description |
|---|---|---|
| BBa_K2656005 | BBa_J23102 | Constitutive promoter (relative strength 1) |
| BBa_K2656004 | BBa_J23106 | Constitutive promoter (relative strength 0.26) |
| BBa_K2656007 | BBa_J23101 | Constitutive promoter (relative strength 0.94) |
| BBa_K2656000 | BBa_I719005 | Strong promoter for T7 phage DNA polymerase |
| BBa_K2656001 | BBa_K338001 | Promoter for the sigma 32 subunit of E. coli DNA polymerase |
| BBa_K2656006 | BBa_K2442101 | pBad minimal promoter: positively regulated by AraC in the presence of L-arabinose |
| BBa_K2656002 | BBa_R0061 | Lux repressible promoter: negatively regulated by LuxR in the presence of Acyl-homoserine-lactone. |
| BBa_K2656003 | BBa_R0062 | Lux inducible promoter: positively regulated by LuxR in the presence of Acyl-homoserine-lactone. |
RBS
Regarding the RBS, we have selected five from the Registry of Standard Biological Parts, with different strengths.
Table 2. Our RBS Collection.
| Part | Original BioBrick | Description |
|---|---|---|
| BBa_K2656009 | BBa_B0030 | Strong RBS (relative strength 1) |
| BBa_K2656011 | BBa_B0034 | Medium RBS (relative strength 0.38) |
| BBa_K2656010 | BBa_B0032 | Weak RBS (relative strength 0.047) |
| BBa_K2656008 | BBa_J61100 | Very weak RBS (relative strength 0.042) |
| BBa_K2656012 | BBa_J61101 | Very weak RBS (relative strength 0.032) |
CDS
As E. coli is our bacterial chassis, all these coding sequences have been codon optimized for this chassis organism.
We have chosen different coding sequences of pigmented proteins, both fluoroproteins (sfGFP, mRFP1, YFP and GFPmut3b) and chromoproteins (amilCP), as they are completely useful to design genetic constructions where there are necessary protein reporters of gene expression.
Moreover, another choice we have made is the addition of the LVA degradation tag to the mRFP1, YFP and GFPmut3b sequences, respectively. The LVA tag causes an increase in protease activity and, therefore, a faster degradation of the reporter protein in the cell. Thus, comparison between protein expression with and without the tag is a useful information to integrate in complex genetic oscillators design.
On the other hand, we have also selected the BSMT1 enzyme coding sequence, which will allow our bacteria to smell like mint in the presence of salicylic acid, to demonstrate odor gene expression.
Additionally, this collection also includes the transcriptional factors AraC and LuxR, that control the regulable promoters previously explained, as well as the CDS of LuxI, that acts producing the Acyl-Homoserine-Lactone to which LuxR responds. For this last CDS, we had to codon optimize its sequence for E. coli.
Finally, we have picked a lysis gene from the enterobacteria phage phiX174, which allows us to create genetic circuits which functionality implies the death of part of the population.
Thus, all these coding sequences are a toolkit of useful basic pieces to supply the user with the necessary pieces to construct the basis of common bacterial genetic circuits.
Table 3. Our CDS Collection.
| Part | Original BioBrick | Description |
|---|---|---|
| BBa_K2656013 | BBa_I746916 | Superfolder Green fluorescent Protein (sfGFP) coding sequence |
| BBa_K2656014 | BBa_E1010 | monomeric Red fluorescent protein (mRFP1) coding sequence |
| BBa_K2656021 | BBa_K592101 | Yellow fluorescent protein (YFP) coding sequence |
| BBa_K2656022 | BBa_E0040 | Green fluorescent protein (GFPmut3b) coding sequence |
| BBa_K2656018 | BBa_K592009 | amilCP (Blue chromoprotein) coding sequence |
| BBa_K2656024 | BBa_K1399001 | mRFP1 with the LVA tag coding sequence |
| BBa_K2656020 | None | YFP with the LVA tag coding sequence |
| BBa_K2656023 | BBa_K1399004 | GFPmut3b with the LVA tag coding sequence |
| BBa_K2656025 | BBa_J45004 | BSMT1 coding sequence |
| BBa_K2656017 | BBa_K2442103 | AraC transcription factor coding sequence |
| BBa_K2656016 | BBa_C0062 | LuxR transcription factor coding sequence |
| BBa_K2656019 | BBa_C0161 | LuxI (Acyl-Homoserine-Lactone synthase) codon optimized coding sequence |
| BBa_K2656015 | None | Lysis gene from the enterobacteria phage phiX174 |
Transcriptional terminators
Lastly, as far as terminators are concerned, we have only chosen one, as we do not think that introducing several would have an influence on the functioning of Printeria. The terminator chosen is B0015 because it is the most used in E. Coli.
Table 4. Our Transcriptional Terminator.
| Part | Original BioBrick | Description |
|---|---|---|
| BBa_K2656026 | BBa_B0015 | Double transcriptional terminator |
Composite Parts
In order to make the necessary measurements to characterize the basic parts and demonstrate that they are functional, we have built some composite parts by combining a promoter, an RBS, a CDS and the terminator in a GoldenBraid Alpha 1 vector with the Golden Gate assembly protocol .
Printone
With Printeria, one of our main goals is to promote the Microbial Art among society. Thus, we decided to provide the bioartists with a complete ART DNA toolkit for its use with Printeria. As they use living cells as primary material for their artworks, we wanted to produce an extense palette: Printone.
Printone is composed of a colection of transcriptional units assembled with each of our fluorescent and coloured basic parts. By changing the promoters and RBS strengths, a wide range of different tonalities were obtained. Moreover, the LVA tag allowed us to reduce the brightness and so include degraded tones.
Image 1. Our Printeria colors: Some of the Printone transcriptional units, with variable expression levels of mRFP, YFP and amilCP proteins
Table 5. Our BioArt DNA toolkit palette: Printone.
| Transcriptional unit | Intensity | CDS |
|---|---|---|
| BBa_K2656105 | Medium: Low promoter, strong RBS | GFPmut3b |
| BBa_K2656106 | Medium: low promoter, strong RBS | GFPmut3b |
| BBa_K2656107 | Strong: Strong promoter, strong RBS | GFPmut3b |
| BBa_K2656117 | Low: Low promoter, medium RBS | GFPmut3b |
| BBa_K2656108 | Degradation tag: less colour intensity | GFPmut3b+LVA tag |
| BBa_K2656101 | Medium: Low promoter, strong RBS | sfGFP |
| BBa_K2656100 | Low: weak promoter, very weak RBS | sfGFP |
| BBa_K2656102 | Low: weak promoter, weak RBS | sfGFP |
| BBa_K2656103 | Medium: weak promoter, medium RBS | sfGFP |
| BBa_K2656104 | Very low: weak promoter, very weak RBS | sfGFP |
| BBa_K2656109 | Medium: Low promoter, strong RBS | mRFP1 |
| BBa_K2656118 | Low: Low promoter, weak RBS | mRFP1 |
| BBa_K2656119 | Medium: Low promoter, medium RBS | mRFP1 |
| BBa_K2656110 | Degradation tag: less colour intensity | mRFP1+LVA tag |
| BBa_K2656113 | Medium: Low promoter, strong RBS | amilCP |
| BBa_K2656120 | Medium: Low promoter, medium RBS | amilCP |
| BBa_K2656112 | Medium: Low promoter, strong RBS | YFP |
| BBa_K2656111 | Degradation tag: less colour intensity | YFP+LVA tag |
Transcriptional units: complete table
This DNA Part Collection also includes non- constitutive transcriptional units and TU assemblies related with genetic circuits regulation, such as the HSP-GFPmut3b transcriptional unit, pLuxR-GFPmut3b transcriptional unit, LuxI constitutive transcriptional unit or AraC constitutive transcriptional unit.Table 6. Our composite part complete collection
Plasmids
Our transcriptional units were built using a GoldenBraid 3.0 alpha 1 vector which is not compatible with the BioBrick grammar. Therefore, we have created the BBa_K2656200 plasmid, adapted from the standard pSB1C3 backbone, to convert our GoldenBraid transcriptional units to BioBricks.
BBa_K2656200 is a modified version of BBa_P10500, so it includes BsmBI restriction sites flanking a RFP selection marker. When digesting this plasmid with BsmBI the result is complementary sticky ends to those formed in a GoldenBraid alpha 1 plasmid when digesting with the same enzyme.
By this way, the BioBrick compatibility for each composite part in our collection is easily achieved using this plasmid as the destination vector in a Golden Gate one-pot reaction with BsmBI.
Table 7. Our designed plasmids
| Part | Description |
|---|---|
| BBa_K2656200 | BioBricks compatible plasmid |